This repository has been archived on 2023-11-11. You can view files and clone it, but cannot push or open issues or pull requests.
libpng/libpng.txt

1890 lines
80 KiB
Plaintext
Raw Normal View History

1998-02-09 02:56:40 +00:00
libpng.txt - A description on how to use and modify libpng
1995-07-20 07:43:20 +00:00
1998-03-07 12:06:55 +00:00
libpng version 1.00 March 7, 1998
1998-02-28 13:00:24 +00:00
Updated and distributed by Glenn Randers-Pehrson
<randeg@alumni.rpi.edu>
Copyright (c) 1998, Glenn Randers-Pehrson
1998-03-07 12:06:55 +00:00
For conditions of distribution and use, see copyright
notice in png.h.
1998-01-01 13:13:13 +00:00
1998-02-28 13:00:24 +00:00
based on:
1998-01-01 13:13:13 +00:00
1998-03-07 12:06:55 +00:00
libpng 1.0 beta 6 version 0.96 May 28, 1997
1998-02-28 13:00:24 +00:00
Updated and distributed by Andreas Dilger
Copyright (c) 1996, 1997 Andreas Dilger
1997-05-16 07:46:07 +00:00
1998-03-07 12:06:55 +00:00
libpng 1.0 beta 2 - version 0.88 January 26, 1996
1998-02-28 13:00:24 +00:00
For conditions of distribution and use, see copyright
notice in png.h. Copyright (c) 1995, 1996 Guy Eric
1998-03-07 12:06:55 +00:00
Schalnat, Group 42, Inc.
1997-05-16 07:46:07 +00:00
1998-02-28 13:00:24 +00:00
Updated/rewritten per request in the libpng FAQ
Copyright (c) 1995 Frank J. T. Wojcik
December 18, 1995 && January 20, 1996
1996-01-10 08:56:49 +00:00
1998-02-28 13:00:24 +00:00
Introduction
1995-07-20 07:43:20 +00:00
This file describes how to use and modify the PNG reference library
1996-01-10 08:56:49 +00:00
(known as libpng) for your own use. There are five sections to this
file: introduction, structures, reading, writing, and modification and
1996-01-16 07:51:56 +00:00
configuration notes for various special platforms. In addition to this
1996-01-10 08:56:49 +00:00
file, example.c is a good starting point for using the library, as
it is heavily commented and should include everything most people
1998-03-07 12:06:55 +00:00
will need. We assume that libpng is already installed; see the
INSTALL file for instructions on how to install libpng.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
Libpng was written as a companion to the PNG specification, as a way
1998-01-17 04:06:18 +00:00
of reducing the amount of time and effort it takes to support the PNG
1998-01-01 13:13:13 +00:00
file format in application programs. The PNG specification is available
as RFC 2083 <ftp://ftp.uu.net/graphics/png/documents/> and as a
1998-02-07 16:20:57 +00:00
W3C Recommendation <http://www.w3.org/TR/REC.png.html>. Some
1998-01-01 13:13:13 +00:00
additional chunks are described in the special-purpose public chunks
documents at <ftp://ftp.uu.net/graphics/png/documents/>. Other information
about PNG can be found at the PNG home page, <http://www.cdrom.com/pub/png/>.
Most users will not have to modify the library significantly; advanced
users may want to modify it more. All attempts were made to make it as
complete as possible, while keeping the code easy to understand.
Currently, this library only supports C. Support for other languages
is being considered.
1995-07-20 07:43:20 +00:00
Libpng has been designed to handle multiple sessions at one time,
to be easily modifiable, to be portable to the vast majority of
1997-05-16 07:46:07 +00:00
machines (ANSI, K&R, 16-, 32-, and 64-bit) available, and to be easy
to use. The ultimate goal of libpng is to promote the acceptance of
1995-07-20 07:43:20 +00:00
the PNG file format in whatever way possible. While there is still
1997-05-16 07:46:07 +00:00
work to be done (see the TODO file), libpng should cover the
1998-01-17 04:06:18 +00:00
majority of the needs of its users.
1995-07-20 07:43:20 +00:00
Libpng uses zlib for its compression and decompression of PNG files.
The zlib compression utility is a general purpose utility that is
1996-01-16 07:51:56 +00:00
useful for more than PNG files, and can be used without libpng.
1996-01-10 08:56:49 +00:00
See the documentation delivered with zlib for more details.
1998-01-17 04:06:18 +00:00
You can usually find the source files for the zlib utility wherever you
find the libpng source files.
1996-01-10 08:56:49 +00:00
1996-01-26 07:38:47 +00:00
Libpng is thread safe, provided the threads are using different
1996-01-16 07:51:56 +00:00
instances of the structures. Each thread should have its own
png_struct and png_info instances, and thus its own image.
Libpng does not protect itself against two threads using the
same instance of a structure.
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
II. Structures
1995-07-20 07:43:20 +00:00
There are two main structures that are important to libpng, png_struct
and png_info. The first, png_struct, is an internal structure that
1996-06-05 20:50:50 +00:00
will not, for the most part, be used by a user except as the first
1998-02-28 13:00:24 +00:00
variable passed to every libpng function call.
1995-07-20 07:43:20 +00:00
The png_info structure is designed to provide information about the
1997-05-16 07:46:07 +00:00
PNG file. At one time, the fields of png_info were intended to be
directly accessible to the user. However, this tended to cause problems
with applications using dynamically loaded libraries, and as a result
1998-01-17 04:06:18 +00:00
a set of interface functions for png_info was developed. The fields
1997-05-16 07:46:07 +00:00
of png_info are still available for older applications, but it is
suggested that applications use the new interfaces if at all possible.
The png.h header file is an invaluable reference for programming with libpng.
1997-01-17 07:34:35 +00:00
And while I'm on the topic, make sure you include the libpng header file:
1995-07-20 07:43:20 +00:00
#include <png.h>
1996-01-10 08:56:49 +00:00
III. Reading
1995-07-20 07:43:20 +00:00
Reading PNG files:
1996-01-10 08:56:49 +00:00
We'll now walk you through the possible functions to call when reading
in a PNG file, briefly explaining the syntax and purpose of each one.
See example.c and png.h for more detail. While Progressive reading
is covered in the next section, you will still need some of the
functions discussed in this section to read a PNG file.
1995-12-19 09:22:19 +00:00
1996-01-26 07:38:47 +00:00
You will want to do the I/O initialization(*) before you get into libpng,
so if it doesn't work, you don't have much to undo. Of course, you
will also want to insure that you are, in fact, dealing with a PNG
file. Libpng provides a simple check to see if a file is a PNG file.
To use it, pass in the first 1 to 8 bytes of the file, and it will
return true or false (1 or 0) depending on whether the bytes could be
part of a PNG file. Of course, the more bytes you pass in, the
1997-01-17 07:34:35 +00:00
greater the accuracy of the prediction.
If you are intending to keep the file pointer open for use in libpng,
you must ensure you don't read more than 8 bytes from the beginning
of the file, and you also have to make a call to png_set_sig_bytes_read()
with the number of bytes you read from the beginning. Libpng will
then only check the bytes (if any) that your program didn't read.
1996-01-26 07:38:47 +00:00
(*): If you are not using the standard I/O functions, you will need
1996-01-10 08:56:49 +00:00
to replace them with custom functions. See the discussion under
Customizing libpng.
1998-02-09 02:56:40 +00:00
1996-01-26 07:38:47 +00:00
FILE *fp = fopen(file_name, "rb");
if (!fp)
{
return;
}
fread(header, 1, number, fp);
1997-01-17 07:34:35 +00:00
is_png = png_check_sig(header, 0, number);
1996-01-26 07:38:47 +00:00
if (!is_png)
{
return;
}
1998-02-09 02:56:40 +00:00
1997-05-16 07:46:07 +00:00
Next, png_struct and png_info need to be allocated and initialized. In
order to ensure that the size of these structures is correct even with a
dynamically linked libpng, there are functions to initialize and
allocate the structures. We also pass the library version, optional
pointers to error handling functions, and a pointer to a data struct for
use by the error functions, if necessary (the pointer and functions can
be NULL if the default error handlers are to be used). See the section
on Changes to Libpng below regarding the old initialization functions.
1996-06-05 20:50:50 +00:00
1998-02-09 02:56:40 +00:00
png_structp png_ptr = png_create_read_struct
(PNG_LIBPNG_VER_STRING, (void *)user_error_ptr,
user_error_fn, user_warning_fn);
1996-01-26 07:38:47 +00:00
if (!png_ptr)
return;
1997-05-16 07:46:07 +00:00
1996-06-05 20:50:50 +00:00
png_infop info_ptr = png_create_info_struct(png_ptr);
1996-01-26 07:38:47 +00:00
if (!info_ptr)
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr,
(png_infopp)NULL, (png_infopp)NULL);
1996-06-05 20:50:50 +00:00
return;
}
1997-05-16 07:46:07 +00:00
1996-06-05 20:50:50 +00:00
png_infop end_info = png_create_info_struct(png_ptr);
if (!end_info)
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
1996-01-26 07:38:47 +00:00
return;
}
1998-02-09 02:56:40 +00:00
1997-01-17 07:34:35 +00:00
The error handling routines passed to png_create_read_struct() are only
necessary if you are not using the libpng supplied error handling
functions. When libpng encounters an error, it expects to longjmp back
to your routine. Therefore, you will need to call setjmp and pass the
jmpbuf field of your png_struct. If you read the file from different
routines, you will need to update the jmpbuf field every time you enter
a new routine that will call a png_ function.
See your documentation of setjmp/longjmp for your compiler for more
handling in the Customizing Libpng section below for more information on
the libpng error handling. If an error occurs, and libpng longjmp's
back to your setjmp, you will want to call png_destroy_read_struct() to
free any memory.
1995-12-19 09:22:19 +00:00
1996-01-26 07:38:47 +00:00
if (setjmp(png_ptr->jmpbuf))
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, &info_ptr,
&end_info);
1996-01-26 07:38:47 +00:00
fclose(fp);
return;
}
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
Now you need to set up the input code. The default for libpng is to
use the C function fread(). If you use this, you will need to pass a
valid FILE * in the function png_init_io(). Be sure that the file is
1997-05-16 07:46:07 +00:00
opened in binary mode. If you wish to handle reading data in another
way, you need not call the png_init_io() function, but you must then
implement the libpng I/O methods discussed in the Customizing Libpng
section below.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_init_io(png_ptr, fp);
1995-07-20 07:43:20 +00:00
1997-01-17 07:34:35 +00:00
If you had previously opened the file and read any of the signature from
the beginning in order to see if this was a PNG file, you need to let
libpng know that there are some bytes missing from the start of the file.
png_set_sig_bytes(png_ptr, number);
1998-03-07 12:06:55 +00:00
At this point, you can set up a callback function that will be
called after each row has been read, which you can use to control
a progress meter or the like. It's demonstrated in pngtest.c.
You must supply a function
void read_row_callback(png_ptr, png_uint_32 row, int pass);
{
/* put your code here */
}
(You can give it another name that you like instead of "read_row_callback")
To inform libpng about your function, use
png_set_read_status_fn(png_ptr, read_row_callback);
1998-01-17 04:06:18 +00:00
In PNG files, the alpha channel in an image is the level of opacity.
If you need the alpha channel in an image to be the level of transparency
instead of opacity, you can invert the alpha channel (or the tRNS chunk
data) after it's read, so that 0 is fully opaque and 255 (in 8-bit or
paletted images) or 65535 (in 16-bit images) is fully transparent, with
png_set_invert_alpha(png_ptr);
This has to appear here rather than later with the other transformations
because the tRNS chunk data must be modified in the case of paletted images.
If your image is not a paletted image, the tRNS data (which in such cases
represents a single color to be rendered as transparent) won't be changed.
1998-03-07 12:06:55 +00:00
Finally, you can write your own transformation function if none of
the existing ones meets your needs. This is done by setting a callback
with
png_set_read_user_transform_fn(png_ptr,
read_transform_fn);
You must supply the function
void read_transform_fn(png_ptr ptr, row_info_ptr
row_info, png_bytep data)
See pngtest.c for a working example. Your function will be called
after all of the other transformations have been processed.
1995-07-20 07:43:20 +00:00
You are now ready to read all the file information up to the actual
image data. You do this with a call to png_read_info().
1997-01-17 07:34:35 +00:00
png_read_info(png_ptr, info_ptr);
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
Functions are used to get the information from the info_ptr:
1998-02-09 02:56:40 +00:00
png_get_IHDR(png_ptr, info_ptr, &width, &height,
&bit_depth, &color_type, &interlace_type,
&compression_type, &filter_type);
width - holds the width of the image
in pixels (up to 2^31).
height - holds the height of the image
in pixels (up to 2^31).
bit_depth - holds the bit depth of one of the
image channels. (valid values are
1, 2, 4, 8, 16 and depend also on
the color_type. See also
significant bits (sBIT) below).
color_type - describes which color/alpha channels
are present.
PNG_COLOR_TYPE_GRAY
(bit depths 1, 2, 4, 8, 16)
PNG_COLOR_TYPE_GRAY_ALPHA
(bit depths 8, 16)
PNG_COLOR_TYPE_PALETTE
(bit depths 1, 2, 4, 8)
PNG_COLOR_TYPE_RGB
(bit_depths 8, 16)
PNG_COLOR_TYPE_RGB_ALPHA
(bit_depths 8, 16)
1997-05-16 07:46:07 +00:00
PNG_COLOR_MASK_PALETTE
PNG_COLOR_MASK_COLOR
PNG_COLOR_MASK_ALPHA
1996-01-10 08:56:49 +00:00
1998-02-09 02:56:40 +00:00
filter_type - (must be PNG_FILTER_TYPE_BASE
for PNG 1.0)
compression_type - (must be PNG_COMPRESSION_TYPE_BASE
for PNG 1.0)
1998-02-28 13:00:24 +00:00
interlace_type - (PNG_INTERLACE_NONE or
PNG_INTERLACE_ADAM7)
1998-02-09 02:56:40 +00:00
Any or all of interlace_type, compression_type, of
filter_type can be
1998-01-31 03:45:12 +00:00
NULL if you are not interested in their values.
1997-05-16 07:46:07 +00:00
channels = png_get_channels(png_ptr, info_ptr);
1998-02-09 02:56:40 +00:00
channels - number of channels of info for the
color type (valid values are 1 (GRAY,
PALETTE), 2 (GRAY_ALPHA), 3 (RGB),
4 (RGB_ALPHA or RGB + filler byte))
1997-05-16 07:46:07 +00:00
rowbytes = png_get_rowbytes(png_ptr, info_ptr);
1996-01-26 07:38:47 +00:00
rowbytes - number of bytes needed to hold a row
1997-05-16 07:46:07 +00:00
signature = png_get_signature(png_ptr, info_ptr);
1998-02-09 02:56:40 +00:00
signature - holds the signature read from the
file (if any). The data is kept in
the same offset it would be if the
1998-02-28 13:00:24 +00:00
whole signature were read (i.e. if an
1998-02-09 02:56:40 +00:00
application had already read in 4
bytes of signature before starting
libpng, the remaining 4 bytes would
be in signature[4] through signature[7]
(see png_set_sig_bytes())).
width = png_get_image_width(png_ptr,
info_ptr);
height = png_get_image_height(png_ptr,
info_ptr);
bit_depth = png_get_bit_depth(png_ptr,
info_ptr);
color_type = png_get_color_type(png_ptr,
info_ptr);
filter_type = png_get_filter_type(png_ptr,
info_ptr);
compression_type = png_get_compression_type(png_ptr,
info_ptr);
interlace_type = png_get_interlace_type(png_ptr,
info_ptr);
1998-01-31 03:45:12 +00:00
1997-05-16 07:46:07 +00:00
These are also important, but their validity depends on whether the chunk
has been read. The png_get_valid(png_ptr, info_ptr, PNG_INFO_<chunk>) and
png_get_<chunk>(png_ptr, info_ptr, ...) functions return non-zero if the
data has been read, or zero if it is missing. The parameters to the
png_get_<chunk> are set directly if they are simple data types, or a pointer
into the info_ptr is returned for any complex types.
1998-02-09 02:56:40 +00:00
png_get_PLTE(png_ptr, info_ptr, &palette,
&num_palette);
palette - the palette for the file
(array of png_color)
1996-01-26 07:38:47 +00:00
num_palette - number of entries in the palette
1997-05-16 07:46:07 +00:00
png_get_gAMA(png_ptr, info_ptr, &gamma);
1998-02-09 02:56:40 +00:00
gamma - the gamma the file is written
at (PNG_INFO_gAMA)
1997-05-16 07:46:07 +00:00
1998-01-17 04:06:18 +00:00
png_get_sRGB(png_ptr, info_ptr, &srgb_intent);
srgb_intent - the rendering intent (PNG_INFO_sRGB)
1998-02-09 02:56:40 +00:00
The presence of the sRGB chunk
means that the pixel data is in the
sRGB color space. This chunk also
implies specific values of gAMA and
cHRM.
1998-01-17 04:06:18 +00:00
1997-05-16 07:46:07 +00:00
png_get_sBIT(png_ptr, info_ptr, &sig_bit);
1998-02-09 02:56:40 +00:00
sig_bit - the number of significant bits for
(PNG_INFO_sBIT) each of the gray,
red, green, and blue channels,
whichever are appropriate for the
given color type (png_color_16)
png_get_tRNS(png_ptr, info_ptr, &trans, &num_trans,
&trans_values);
trans - array of transparent entries for
palette (PNG_INFO_tRNS)
trans_values - transparent pixel for non-paletted
images (PNG_INFO_tRNS)
num_trans - number of transparent entries
(PNG_INFO_tRNS)
png_get_hIST(png_ptr, info_ptr, &hist);
(PNG_INFO_hIST)
hist - histogram of palette (array of
png_color_16)
1997-05-16 07:46:07 +00:00
png_get_tIME(png_ptr, info_ptr, &mod_time);
1998-02-09 02:56:40 +00:00
mod_time - time image was last modified
(PNG_VALID_tIME)
1997-05-16 07:46:07 +00:00
png_get_bKGD(png_ptr, info_ptr, &background);
1996-06-05 20:50:50 +00:00
background - background color (PNG_VALID_bKGD)
1997-05-16 07:46:07 +00:00
num_text = png_get_text(png_ptr, info_ptr, &text_ptr);
1998-02-09 02:56:40 +00:00
text_ptr - array of png_text holding image
comments
text_ptr[i]->key - keyword for comment.
text_ptr[i]->text - text comments for current
keyword.
text_ptr[i]->compression - type of compression used
on "text" PNG_TEXT_COMPRESSION_NONE
or PNG_TEXT_COMPRESSION_zTXt
1996-01-26 07:38:47 +00:00
num_text - number of comments
1996-01-10 08:56:49 +00:00
1998-02-09 02:56:40 +00:00
png_get_oFFs(png_ptr, info_ptr, &offset_x, &offset_y,
&unit_type);
offset_x - positive offset from the left edge
of the screen
offset_y - positive offset from the top edge
of the screen
1997-05-16 07:46:07 +00:00
unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER
1998-02-09 02:56:40 +00:00
png_get_pHYs(png_ptr, info_ptr, &res_x, &res_y,
&unit_type);
res_x - pixels/unit physical resolution in
x direction
res_y - pixels/unit physical resolution in
x direction
1998-02-28 13:00:24 +00:00
unit_type - PNG_RESOLUTION_UNKNOWN,
1998-02-09 02:56:40 +00:00
PNG_RESOLUTION_METER
1997-05-16 07:46:07 +00:00
1998-01-31 03:45:12 +00:00
The data from the pHYs chunk can be retrieved in several convenient
forms:
1998-02-28 13:00:24 +00:00
res_x = png_get_x_pixels_per_meter(png_ptr,
info_ptr)
res_y = png_get_y_pixels_per_meter(png_ptr,
info_ptr)
1998-02-09 02:56:40 +00:00
res_x_and_y = png_get_pixels_per_meter(png_ptr,
info_ptr)
aspect_ratio = png_get_pixel_aspect_ratio(png_ptr,
info_ptr)
1998-01-31 03:45:12 +00:00
1998-02-09 02:56:40 +00:00
(Each of these returns 0 [signifying "unknown"] if
the data is not present or if res_x is 0;
res_x_and_y is 0 if res_x != res_y)
1998-01-31 03:45:12 +00:00
1997-05-16 07:46:07 +00:00
For more information, see the png_info definition in png.h and the
1995-07-20 07:43:20 +00:00
PNG specification for chunk contents. Be careful with trusting
rowbytes, as some of the transformations could increase the space
1997-05-16 07:46:07 +00:00
needed to hold a row (expand, filler, gray_to_rgb, etc.).
See png_read_update_info(), below.
A quick word about text_ptr and num_text. PNG stores comments in
keyword/text pairs, one pair per chunk, with no limit on the number
of text chunks, and a 2^31 byte limit on their size. While there are
suggested keywords, there is no requirement to restrict the use to these
strings. It is strongly suggested that keywords and text be sensible
1998-01-17 04:06:18 +00:00
to humans (that's the point), so don't use abbreviations. Non-printing
symbols are not allowed. See the PNG specification for more details.
There is also no requirement to have text after the keyword.
1997-05-16 07:46:07 +00:00
Keywords should be limited to 79 Latin-1 characters without leading or
trailing spaces, but non-consecutive spaces are allowed within the
keyword. It is possible to have the same keyword any number of times.
The text_ptr is an array of png_text structures, each holding pointer
to a keyword and a pointer to a text string. Only the text string may
be null. The keyword/text pairs are put into the array in the order
that they are received. However, some or all of the text chunks may be
1996-01-26 07:38:47 +00:00
after the image, so, to make sure you have read all the text chunks,
1995-07-20 07:43:20 +00:00
don't mess with these until after you read the stuff after the image.
This will be mentioned again below in the discussion that goes with
png_read_end().
1997-05-16 07:46:07 +00:00
After you've read the header information, you can set up the library
to handle any special transformations of the image data. The various
1995-07-20 07:43:20 +00:00
ways to transform the data will be described in the order that they
1996-01-26 07:38:47 +00:00
should occur. This is important, as some of these change the color
type and/or bit depth of the data, and some others only work on
certain color types and bit depths. Even though each transformation
1998-02-28 13:00:24 +00:00
checks to see if it has data that it can do something with, you should
1996-01-26 07:38:47 +00:00
make sure to only enable a transformation if it will be valid for the
data. For example, don't swap red and blue on grayscale data.
1997-01-17 07:34:35 +00:00
The colors used for the background and transparency values should be
supplied in the same format/depth as the current image data. They
are stored in the same format/depth as the image data in a bKGD or tRNS
chunk, so this is what libpng expects for this data. The colors are
transformed to keep in sync with the image data when an application
1997-05-16 07:46:07 +00:00
calls the png_read_update_info() routine (see below).
1997-01-17 07:34:35 +00:00
1996-06-05 20:50:50 +00:00
Data will be decoded into the supplied row buffers packed into bytes
unless the library has been told to transform it into another format.
For example, 4 bit/pixel paletted or grayscale data will be returned
2 pixels/byte with the leftmost pixel in the high-order bits of the
byte, unless png_set_packing() is called. 8-bit RGB data will be stored
in RGBRGBRGB format unless png_set_filler() is called to insert filler
bytes, either before or after each RGB triplet. 16-bit RGB data will
be returned RRGGBBRRGGBB, with the most significant byte of the color
value first, unless png_set_strip_16() is called to transform it to
regular RGBRGB triplets.
The following code transforms grayscale images of less than 8 to 8 bits,
changes paletted images to RGB, and adds a full alpha channel if there is
transparency information in a tRNS chunk. This is most useful on
grayscale images with bit depths of 2 or 4 or if there is a multiple-image
viewing application that wishes to treat all images in the same way.
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
if (color_type == PNG_COLOR_TYPE_PALETTE &&
bit_depth <= 8) png_set_expand(png_ptr);
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
if (color_type == PNG_COLOR_TYPE_GRAY &&
bit_depth < 8) png_set_expand(png_ptr);
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
if (png_get_valid(png_ptr, info_ptr,
PNG_INFO_tRNS)) png_set_expand(png_ptr);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
PNG can have files with 16 bits per channel. If you only can handle
8 bits per channel, this will strip the pixels down to 8 bit.
1997-05-16 07:46:07 +00:00
if (bit_depth == 16)
png_set_strip_16(png_ptr);
1998-01-31 03:45:12 +00:00
The png_set_background() function tells libpng to composite images
with alpha or simple transparency against the supplied background
color. If the PNG file contains a bKGD chunk (PNG_INFO_bKGD valid),
you may use this color, or supply another color more suitable for
the current display (e.g., the background color from a web page). You
need to tell libpng whether the color is in the gamma space of the
display (PNG_BACKGROUND_GAMMA_SCREEN for colors you supply), the file
(PNG_BACKGROUND_GAMMA_FILE for colors from the bKGD chunk), or one
that is neither of these gammas (PNG_BACKGROUND_GAMMA_UNIQUE - I don't
know why anyone would use this, but it's here).
1997-05-16 07:46:07 +00:00
If, for some reason, you don't need the alpha channel on an image,
1998-01-31 03:45:12 +00:00
and you want to remove it rather than combining it with the background
(but the image author certainly had in mind that you *would* combine
it with the background, so that's what you should probably do):
1997-05-16 07:46:07 +00:00
if (color_type & PNG_COLOR_MASK_ALPHA)
png_set_strip_alpha(png_ptr);
1996-06-05 20:50:50 +00:00
PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as
they can, resulting in, for example, 8 pixels per byte for 1 bit
files. This code expands to 1 pixel per byte without changing the
values of the pixels:
1997-05-16 07:46:07 +00:00
if (bit_depth < 8)
1996-06-05 20:50:50 +00:00
png_set_packing(png_ptr);
1997-05-16 07:46:07 +00:00
PNG files have possible bit depths of 1, 2, 4, 8, and 16. All pixels
1998-01-17 04:06:18 +00:00
stored in a PNG image have been "scaled" or "shifted" up to the next
1998-02-28 13:00:24 +00:00
higher possible bit depth (e.g. from 5 bits/sample in the range [0,31] to
1997-05-16 07:46:07 +00:00
8 bits/sample in the range [0, 255]). However, it is also possible to
convert the PNG pixel data back to the original bit depth of the image.
This call reduces the pixels back down to the original bit depth:
1996-06-05 20:50:50 +00:00
1997-05-16 07:46:07 +00:00
png_color_16p sig_bit;
1996-06-05 20:50:50 +00:00
1997-05-16 07:46:07 +00:00
if (png_get_sBIT(png_ptr, info_ptr, &sig_bit))
png_set_shift(png_ptr, sig_bit);
PNG files store 3-color pixels in red, green, blue order. This code
1996-06-05 20:50:50 +00:00
changes the storage of the pixels to blue, green, red:
1997-05-16 07:46:07 +00:00
if (color_type == PNG_COLOR_TYPE_RGB ||
color_type == PNG_COLOR_TYPE_RGB_ALPHA)
1996-06-05 20:50:50 +00:00
png_set_bgr(png_ptr);
PNG files store RGB pixels packed into 3 bytes. This code expands them
into 4 bytes for windowing systems that need them in this format:
1998-02-09 02:56:40 +00:00
if (bit_depth == 8 && color_type ==
PNG_COLOR_TYPE_RGB) png_set_filler(png_ptr,
filler, PNG_FILLER_BEFORE);
1996-06-05 20:50:50 +00:00
1997-05-16 07:46:07 +00:00
where "filler" is the number to fill with, and the location is
1996-06-05 20:50:50 +00:00
either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether
1997-05-16 07:46:07 +00:00
you want the filler before the RGB or after. This transformation
does not affect images that already have full alpha channels.
If you are reading an image with an alpha channel, and you need the
data as ARGB instead of the normal PNG format RGBA:
1996-06-05 20:50:50 +00:00
1997-05-16 07:46:07 +00:00
if (color_type == PNG_COLOR_TYPE_RGB_ALPHA)
png_set_swap_alpha(png_ptr);
For some uses, you may want a grayscale image to be represented as
1996-06-05 20:50:50 +00:00
RGB. This code will do that conversion:
1997-05-16 07:46:07 +00:00
if (color_type == PNG_COLOR_TYPE_GRAY ||
color_type == PNG_COLOR_TYPE_GRAY_ALPHA)
png_set_gray_to_rgb(png_ptr);
If you have a grayscale and you are using png_set_expand() to change to
a higher bit-depth you must indicate if the supplied background gray
is supplied in the original file bit depth (need_expand = 1) or in the
expanded bit depth (need_expand = 0). Similarly, if you are reading
1996-06-05 20:50:50 +00:00
a paletted image, you must indicate if you have supplied the background
1997-05-16 07:46:07 +00:00
as a palette index that needs to be expanded (need_expand = 1). You can
also specify an RGB triplet that isn't in the palette when setting your
background for a paletted image.
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
png_color_16 my_background;
png_color_16p image_background;
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
if (png_get_bKGD(png_ptr, info_ptr,
&image_background))
1997-05-16 07:46:07 +00:00
png_set_background(png_ptr, image_background),
1998-02-09 02:56:40 +00:00
PNG_BACKGROUND_GAMMA_FILE, 1, 1.0);
1997-05-16 07:46:07 +00:00
else
png_set_background(png_ptr, &my_background,
PNG_BACKGROUND_GAMMA_SCREEN, 0, 1.0);
To properly display PNG images on any kind of system, the application needs
to know what the display gamma is. Ideally, the user will know this, and
the application will allow them to set it. One method of allowing the user
to set the display gamma separately for each system is to check for the
1998-01-17 04:06:18 +00:00
DISPLAY_GAMMA and VIEWING_GAMMA environment variables or for a SCREEN_GAMMA
environment variable, which will hopefully be correctly set.
Note that display_gamma is the gamma of your display, while screen_gamma is
the overall gamma correction required to produce pleasing results,
which depends on the lighting conditions in the surrounding environment.
Screen_gamma is display_gamma/viewing_gamma, where viewing_gamma is
the amount of additional gamma correction needed to compensate for
1998-02-28 13:00:24 +00:00
a (viewing_gamma=1.25) environment. In a dim or brightly lit room, no
compensation other than the display_gamma is needed (viewing_gamma=1.0).
1997-05-16 07:46:07 +00:00
1998-02-09 02:56:40 +00:00
if (/* We have a user-defined screen
gamma value */)
1997-05-16 07:46:07 +00:00
{
screen_gamma = user_defined_screen_gamma;
}
1998-02-09 02:56:40 +00:00
/* One way that applications can share the same
screen gamma value */
else if ((gamma_str = getenv("SCREEN_GAMMA"))
!= NULL)
1997-05-16 07:46:07 +00:00
{
screen_gamma = atof(gamma_str);
}
/* If we don't have another value */
1995-07-20 07:43:20 +00:00
else
1997-05-16 07:46:07 +00:00
{
1998-02-09 02:56:40 +00:00
screen_gamma = 2.2; /* A good guess for a
1998-02-28 13:00:24 +00:00
PC monitor in a bright office or a dim room */
1998-02-09 02:56:40 +00:00
screen_gamma = 2.0; /* A good guess for a
PC monitor in a dark room */
screen_gamma = 1.7 or 1.0; /* A good
guess for Mac systems */
1997-05-16 07:46:07 +00:00
}
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
The png_set_gamma() function handles gamma transformations of the data.
Pass both the file gamma and the current screen_gamma. If the file does
not have a gamma value, you can pass one anyway if you have an idea what
1998-01-31 03:45:12 +00:00
it is (usually 0.50 is a good guess for GIF images on PCs). Note
1996-01-26 07:38:47 +00:00
that file gammas are inverted from screen gammas. See the discussions
1997-05-16 07:46:07 +00:00
on gamma in the PNG specification for an excellent description of what
gamma is, and why all applications should support it. It is strongly
recommended that PNG viewers support gamma correction.
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
if (png_get_gAMA(png_ptr, info_ptr, &gamma))
png_set_gamma(png_ptr, screen_gamma, gamma);
1996-06-05 20:50:50 +00:00
else
1998-01-31 03:45:12 +00:00
png_set_gamma(png_ptr, screen_gamma, 0.50);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
If you need to reduce an RGB file to a paletted file, or if a paletted
1996-01-26 07:38:47 +00:00
file has more entries then will fit on your screen, png_set_dither()
will do that. Note that this is a simple match dither that merely
finds the closest color available. This should work fairly well with
optimized palettes, and fairly badly with linear color cubes. If you
pass a palette that is larger then maximum_colors, the file will
reduce the number of colors in the palette so it will fit into
maximum_colors. If there is a histogram, it will use it to make
1996-06-05 20:50:50 +00:00
more intelligent choices when reducing the palette. If there is no
1996-01-26 07:38:47 +00:00
histogram, it may not do as good a job.
1997-05-16 07:46:07 +00:00
if (color_type & PNG_COLOR_MASK_COLOR)
1995-07-20 07:43:20 +00:00
{
1998-02-09 02:56:40 +00:00
if (png_get_valid(png_ptr, info_ptr,
PNG_INFO_PLTE))
1996-01-26 07:38:47 +00:00
{
1997-05-16 07:46:07 +00:00
png_color_16p histogram;
1998-02-09 02:56:40 +00:00
png_get_hIST(png_ptr, info_ptr,
&histogram);
png_set_dither(png_ptr, palette, num_palette,
max_screen_colors, histogram, 1);
1996-01-26 07:38:47 +00:00
}
1995-07-20 07:43:20 +00:00
else
{
1996-01-26 07:38:47 +00:00
png_color std_color_cube[MAX_SCREEN_COLORS] =
1995-07-20 07:43:20 +00:00
{ ... colors ... };
1998-02-09 02:56:40 +00:00
png_set_dither(png_ptr, std_color_cube,
MAX_SCREEN_COLORS, MAX_SCREEN_COLORS,
NULL,0);
1995-07-20 07:43:20 +00:00
}
}
1996-01-26 07:38:47 +00:00
PNG files describe monochrome as black being zero and white being one.
The following code will reverse this (make black be one and white be
zero):
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
if (bit_depth == 1 && color_type == PNG_COLOR_GRAY)
1996-01-26 07:38:47 +00:00
png_set_invert_mono(png_ptr);
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
PNG files store 16 bit pixels in network byte order (big-endian,
1998-02-28 13:00:24 +00:00
ie. most significant bits first). This code changes the storage to the
other way (little-endian, i.e. least significant bits first, the
1996-01-10 08:56:49 +00:00
way PCs store them):
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
if (bit_depth == 16)
1996-01-26 07:38:47 +00:00
png_set_swap(png_ptr);
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you
need to change the order the pixels are packed into bytes, you can use:
if (bit_depth < 8)
png_set_packswap(png_ptr);
1996-01-10 08:56:49 +00:00
The last thing to handle is interlacing; this is covered in detail below,
1998-01-31 03:45:12 +00:00
but you must call the function here if you want libpng to handle expansion
of the interlaced image.
1995-09-26 10:22:39 +00:00
1998-01-17 04:06:18 +00:00
number_of_passes = png_set_interlace_handling(png_ptr);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
After setting the transformations, libpng can update your png_info
structure to reflect any transformations you've requested with this
1997-05-16 07:46:07 +00:00
call. This is most useful to update the info structure's rowbytes
field so you can use it to allocate your image memory. This function
1998-01-31 03:45:12 +00:00
will also update your palette with the correct screen_gamma and
1996-06-05 20:50:50 +00:00
background if these have been given with the calls above.
1995-09-26 10:22:39 +00:00
1996-01-26 07:38:47 +00:00
png_read_update_info(png_ptr, info_ptr);
1995-09-26 10:22:39 +00:00
After you call png_read_update_info(), you can allocate any
1996-06-05 20:50:50 +00:00
memory you need to hold the image. The row data is simply
raw byte data for all forms of images. As the actual allocation
1995-09-26 10:22:39 +00:00
varies among applications, no example will be given. If you
1996-06-05 20:50:50 +00:00
are allocating one large chunk, you will need to build an
array of pointers to each row, as it will be needed for some
of the functions below.
1995-09-26 10:22:39 +00:00
After you've allocated memory, you can read the image data.
1995-07-20 07:43:20 +00:00
The simplest way to do this is in one function call. If you are
allocating enough memory to hold the whole image, you can just
call png_read_image() and libpng will read in all the image data
and put it in the memory area supplied. You will need to pass in
an array of pointers to each row.
This function automatically handles interlacing, so you don't need
to call png_set_interlace_handling() or call this function multiple
times, or any of that other stuff necessary with png_read_rows().
png_read_image(png_ptr, row_pointers);
where row_pointers is:
1996-06-05 20:50:50 +00:00
png_bytep row_pointers[height];
1995-07-20 07:43:20 +00:00
You can point to void or char or whatever you use for pixels.
1998-01-17 04:06:18 +00:00
If you don't want to read in the whole image at once, you can
1995-07-20 07:43:20 +00:00
use png_read_rows() instead. If there is no interlacing (check
1998-02-28 13:00:24 +00:00
interlace_type == PNG_INTERLACE_NONE), this is simple:
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
png_read_rows(png_ptr, row_pointers, NULL,
number_of_rows);
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
where row_pointers is the same as in the png_read_image() call.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
If you are doing this just one row at a time, you can do this with
1995-07-20 07:43:20 +00:00
row_pointers:
1996-01-26 07:38:47 +00:00
png_bytep row_pointers = row;
1996-06-05 20:50:50 +00:00
png_read_row(png_ptr, &row_pointers, NULL);
1996-01-10 08:56:49 +00:00
If the file is interlaced (info_ptr->interlace_type != 0), things get
1997-05-16 07:46:07 +00:00
somewhat harder. The only current (PNG Specification version 1.0)
1998-02-28 13:00:24 +00:00
interlacing type for PNG is (interlace_type == PNG_INTERLACE_ADAM7)
1998-01-17 04:06:18 +00:00
is a somewhat complicated 2D interlace scheme, known as Adam7, that
1997-05-16 07:46:07 +00:00
breaks down an image into seven smaller images of varying size, based
on an 8x8 grid.
1996-06-05 20:50:50 +00:00
libpng can fill out those images or it can give them to you "as is".
If you want them filled out, there are two ways to do that. The one
mentioned in the PNG specification is to expand each pixel to cover
1998-01-17 04:06:18 +00:00
those pixels that have not been read yet (the "rectangle" method).
This results in a blocky image for the first pass, which gradually
smooths out as more pixels are read. The other method is the "sparkle"
method, where pixels are drawn only in their final locations, with the
rest of the image remaining whatever colors they were initialized to
before the start of the read. The first method usually looks better,
but tends to be slower, as there are more pixels to put in the rows.
1996-06-05 20:50:50 +00:00
If you don't want libpng to handle the interlacing details, just call
png_read_rows() seven times to read in all seven images. Each of the
1998-01-17 04:06:18 +00:00
images is a valid image by itself, or they can all be combined on an
1996-06-05 20:50:50 +00:00
8x8 grid to form a single image (although if you intend to combine them
you would be far better off using the libpng interlace handling).
The first pass will return an image 1/8 as wide as the entire image
(every 8th column starting in column 0) and 1/8 as high as the original
(every 8th row starting in row 0), the second will be 1/8 as wide
(starting in column 4) and 1/8 as high (also starting in row 0). The
1998-01-01 13:13:13 +00:00
third pass will be 1/4 as wide (every 4th pixel starting in column 0) and
1996-06-05 20:50:50 +00:00
1/8 as high (every 8th row starting in row 4), and the fourth pass will
be 1/4 as wide and 1/4 as high (every 4th column starting in column 2,
and every 4th row starting in row 0). The fifth pass will return an
image 1/2 as wide, and 1/4 as high (starting at column 0 and row 2),
while the sixth pass will be 1/2 as wide and 1/2 as high as the original
(starting in column 1 and row 0). The seventh and final pass will be as
wide as the original, and 1/2 as high, containing all of the odd
numbered scanlines. Phew!
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
If you want libpng to expand the images, call this before calling
png_start_read_image() or png_read_update_info():
1995-07-20 07:43:20 +00:00
1998-02-28 13:00:24 +00:00
if (interlace_type == PNG_INTERLACE_ADAM7)
1998-02-09 02:56:40 +00:00
number_of_passes
= png_set_interlace_handling(png_ptr);
1995-07-20 07:43:20 +00:00
This will return the number of passes needed. Currently, this
is seven, but may change if another interlace type is added.
This function can be called even if the file is not interlaced,
1996-06-05 20:50:50 +00:00
where it will return one pass.
1995-07-20 07:43:20 +00:00
If you are not going to display the image after each pass, but are
going to wait until the entire image is read in, use the sparkle
effect. This effect is faster and the end result of either method
is exactly the same. If you are planning on displaying the image
1998-01-17 04:06:18 +00:00
after each pass, the "rectangle" effect is generally considered the
1995-07-20 07:43:20 +00:00
better looking one.
If you only want the "sparkle" effect, just call png_read_rows() as
normal, with the third parameter NULL. Make sure you make pass over
1998-01-17 04:06:18 +00:00
the image number_of_passes times, and you don't change the data in the
1995-07-20 07:43:20 +00:00
rows between calls. You can change the locations of the data, just
not the data. Each pass only writes the pixels appropriate for that
pass, and assumes the data from previous passes is still valid.
1998-02-09 02:56:40 +00:00
png_read_rows(png_ptr, row_pointers, NULL,
number_of_rows);
1995-07-20 07:43:20 +00:00
If you only want the first effect (the rectangles), do the same as
before except pass the row buffer in the third parameter, and leave
the second parameter NULL.
1998-02-09 02:56:40 +00:00
png_read_rows(png_ptr, NULL, row_pointers,
number_of_rows);
1995-07-20 07:43:20 +00:00
After you are finished reading the image, you can finish reading
1996-06-05 20:50:50 +00:00
the file. If you are interested in comments or time, which may be
stored either before or after the image data, you should pass the
separate png_info struct if you want to keep the comments from
before and after the image separate. If you are not interested, you
can pass NULL.
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
png_read_end(png_ptr, end_info);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
When you are done, you can free all memory allocated by libpng like this:
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, &info_ptr,
&end_info);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
For a more compact example of reading a PNG image, see the file example.c.
1995-07-20 07:43:20 +00:00
1995-12-19 09:22:19 +00:00
Reading PNG files progressively:
The progressive reader is slightly different then the non-progressive
reader. Instead of calling png_read_info(), png_read_rows(), and
png_read_end(), you make one call to png_process_data(), which calls
callbacks when it has the info, a row, or the end of the image. You
set up these callbacks with png_set_progressive_read_fn(). You don't
have to worry about the input/output functions of libpng, as you are
giving the library the data directly in png_process_data(). I will
1996-01-26 07:38:47 +00:00
assume that you have read the section on reading PNG files above,
1995-12-19 09:22:19 +00:00
so I will only highlight the differences (although I will show
all of the code).
png_structp png_ptr;
png_infop info_ptr;
1998-02-09 02:56:40 +00:00
/* An example code fragment of how you would
initialize the progressive reader in your
application. */
int
initialize_png_reader()
{
png_ptr = png_create_read_struct
(PNG_LIBPNG_VER_STRING, (void *)user_error_ptr,
user_error_fn, user_warning_fn);
1996-01-26 07:38:47 +00:00
if (!png_ptr)
return -1;
1996-06-05 20:50:50 +00:00
info_ptr = png_create_info_struct(png_ptr);
1996-01-26 07:38:47 +00:00
if (!info_ptr)
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, (png_infopp)NULL,
(png_infopp)NULL);
1996-01-26 07:38:47 +00:00
return -1;
}
if (setjmp(png_ptr->jmpbuf))
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
1996-01-26 07:38:47 +00:00
return -1;
}
1998-02-09 02:56:40 +00:00
/* This one's new. You can provide functions
to be called when the header info is valid,
when each row is completed, and when the image
is finished. If you aren't using all functions,
you can specify a NULL parameter. You can use
any struct as the user_ptr (cast to a void pointer
for the function call), and retrieve the pointer
from inside the callbacks using the function
png_get_progressive_ptr(png_ptr);
which will return a void pointer, which you have
to cast appropriately.
1996-06-05 20:50:50 +00:00
*/
png_set_progressive_read_fn(png_ptr, (void *)user_ptr,
1996-01-26 07:38:47 +00:00
info_callback, row_callback, end_callback);
return 0;
1998-02-09 02:56:40 +00:00
}
1995-12-19 09:22:19 +00:00
1998-02-09 02:56:40 +00:00
/* A code fragment that you call as you receive blocks
of data */
int
process_data(png_bytep buffer, png_uint_32 length)
{
1996-01-26 07:38:47 +00:00
if (setjmp(png_ptr->jmpbuf))
{
1998-02-09 02:56:40 +00:00
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
1996-01-26 07:38:47 +00:00
return -1;
}
1998-02-09 02:56:40 +00:00
/* This one's new also. Simply give it a chunk
of data from the file stream (in order, of
course). On machines with segmented memory
models machines, don't give it any more than
64K. The library seems to run fine with sizes
of 4K. Although you can give it much less if
necessary (I assume you can give it chunks of
1 byte, I haven't tried less then 256 bytes
yet). When this function returns, you may
want to display any rows that were generated
in the row callback if you don't already do
so there.
1996-06-05 20:50:50 +00:00
*/
1996-01-26 07:38:47 +00:00
png_process_data(png_ptr, info_ptr, buffer, length);
return 0;
1998-02-09 02:56:40 +00:00
}
1995-12-19 09:22:19 +00:00
1998-02-09 02:56:40 +00:00
/* This function is called (as set by
png_set_progressive_fn() above) when enough data
has been supplied so all of the header has been
read.
1996-06-05 20:50:50 +00:00
*/
1998-02-09 02:56:40 +00:00
void
1998-03-07 12:06:55 +00:00
info_callback(png_structp png_ptr, png_infop info)
1998-02-09 02:56:40 +00:00
{
/* Do any setup here, including setting any of
the transformations mentioned in the Reading
PNG files section. For now, you _must_ call
either png_start_read_image() or
png_read_update_info() after all the
transformations are set (even if you don't set
any). You may start getting rows before
png_process_data() returns, so this is your
last chance to prepare for that.
1996-06-05 20:50:50 +00:00
*/
1998-02-09 02:56:40 +00:00
}
1995-12-19 09:22:19 +00:00
1998-02-09 02:56:40 +00:00
/* This function is called when each row of image
data is complete */
void
row_callback(png_structp png_ptr, png_bytep new_row,
1996-01-26 07:38:47 +00:00
png_uint_32 row_num, int pass)
1998-02-09 02:56:40 +00:00
{
/* If the image is interlaced, and you turned
on the interlace handler, this function will
be called for every row in every pass. Some
of these rows will not be changed from the
previous pass. When the row is not changed,
the new_row variable will be NULL. The rows
and passes are called in order, so you don't
really need the row_num and pass, but I'm
supplying them because it may make your life
easier.
For the non-NULL rows of interlaced images,
you must call png_progressive_combine_row()
passing in the row and the old row. You can
call this function for NULL rows (it will just
return) and for non-interlaced images (it just
does the memcpy for you) if it will make the
code easier. Thus, you can just do this for
all cases:
1996-06-05 20:50:50 +00:00
*/
1996-01-26 07:38:47 +00:00
1998-02-09 02:56:40 +00:00
png_progressive_combine_row(png_ptr, old_row,
new_row);
/* where old_row is what was displayed for
previous rows. Note that the first pass
(pass == 0, really) will completely cover
the old row, so the rows do not have to be
initialized. After the first pass (and only
for interlaced images), you will have to pass
the current row, and the function will combine
the old row and the new row.
1996-01-26 07:38:47 +00:00
*/
1998-02-09 02:56:40 +00:00
}
void
end_callback(png_structp png_ptr, png_infop info)
{
/* This function is called after the whole image
has been read, including any chunks after the
image (up to and including the IEND). You
will usually have the same info chunk as you
had in the header, although some data may have
been added to the comments and time fields.
Most people won't do much here, perhaps setting
a flag that marks the image as finished.
1996-06-05 20:50:50 +00:00
*/
1998-02-09 02:56:40 +00:00
}
1995-12-19 09:22:19 +00:00
1996-01-26 07:38:47 +00:00
1996-01-10 08:56:49 +00:00
IV. Writing
1995-07-20 07:43:20 +00:00
Much of this is very similar to reading. However, everything of
1996-01-26 07:38:47 +00:00
importance is repeated here, so you won't have to constantly look
1996-01-10 08:56:49 +00:00
back up in the reading section to understand writing.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
You will want to do the I/O initialization before you get into libpng,
1996-06-05 20:50:50 +00:00
so if it doesn't work, you don't have anything to undo. If you are not
1996-01-26 07:38:47 +00:00
using the standard I/O functions, you will need to replace them with
1996-06-05 20:50:50 +00:00
custom writing functions. See the discussion under Customizing libpng.
1996-01-26 07:38:47 +00:00
FILE *fp = fopen(file_name, "wb");
if (!fp)
{
1996-06-05 20:50:50 +00:00
return;
1996-01-26 07:38:47 +00:00
}
Next, png_struct and png_info need to be allocated and initialized.
1996-06-05 20:50:50 +00:00
As these can be both relatively large, you may not want to store these
on the stack, unless you have stack space to spare. Of course, you
1998-03-07 12:06:55 +00:00
will want to check if they return NULL. If you are also reading,
you won't want to name your read structure and your write structure
both "png_ptr"; you can call them anything you like, such as
"read_ptr" and "write_ptr". Look at pngtest.c, for example.
1996-01-26 07:38:47 +00:00
1998-02-09 02:56:40 +00:00
png_structp png_ptr = png_create_write_struct
(PNG_LIBPNG_VER_STRING, (void *)user_error_ptr,
user_error_fn, user_warning_fn);
1996-01-26 07:38:47 +00:00
if (!png_ptr)
1996-06-05 20:50:50 +00:00
return;
png_infop info_ptr = png_create_info_struct(png_ptr);
1996-01-26 07:38:47 +00:00
if (!info_ptr)
{
1998-02-09 02:56:40 +00:00
png_destroy_write_struct(&png_ptr,
(png_infopp)NULL);
1996-06-05 20:50:50 +00:00
return;
1996-01-26 07:38:47 +00:00
}
1995-07-20 07:43:20 +00:00
After you have these structures, you will need to set up the
error handling. When libpng encounters an error, it expects to
1996-06-05 20:50:50 +00:00
longjmp() back to your routine. Therefore, you will need to call
1995-07-20 07:43:20 +00:00
setjmp and pass the jmpbuf field of your png_struct. If you
write the file from different routines, you will need to update
the jmpbuf field every time you enter a new routine that will
call a png_ function. See your documentation of setjmp/longjmp
1995-12-19 09:22:19 +00:00
for your compiler for more information on setjmp/longjmp. See
1996-01-10 08:56:49 +00:00
the discussion on libpng error handling in the Customizing Libpng
section below for more information on the libpng error handling.
1996-01-26 07:38:47 +00:00
if (setjmp(png_ptr->jmpbuf))
{
1996-06-05 20:50:50 +00:00
png_destroy_write_struct(&png_ptr, &info_ptr);
1996-01-26 07:38:47 +00:00
fclose(fp);
return;
}
1997-05-16 07:46:07 +00:00
Now you need to set up the output code. The default for libpng is to
1996-01-26 07:38:47 +00:00
use the C function fwrite(). If you use this, you will need to pass a
valid FILE * in the function png_init_io(). Be sure that the file is
opened in binary mode. Again, if you wish to handle writing data in
another way, see the discussion on libpng I/O handling in the Customizing
Libpng section below.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_init_io(png_ptr, fp);
1995-07-20 07:43:20 +00:00
1998-03-07 12:06:55 +00:00
At this point, you can set up a callback function that will be
called after each row has been written, which you can use to control
a progress meter or the like. It's demonstrated in pngtest.c.
You must supply a function
void write_row_callback(png_ptr, png_uint_32 row, int pass);
{
/* put your code here */
}
(You can give it another name that you like instead of "write_row_callback")
To inform libpng about your function, use
png_set_write_status_fn(png_ptr, write_row_callback);
1996-06-05 20:50:50 +00:00
You now have the option of modifying how the compression library will
run. The following functions are mainly for testing, but may be useful
1997-01-17 07:34:35 +00:00
in some cases, like if you need to write PNG files extremely fast and
1996-06-05 20:50:50 +00:00
are willing to give up some compression, or if you want to get the
maximum possible compression at the expense of slower writing. If you
have no special needs in this area, let the library do what it wants by
not calling this function at all, as it has been tuned to deliver a good
speed/compression ratio. The second parameter to png_set_filter() is
the filter method, for which the only valid value is '0' (as of the
1998-02-28 13:00:24 +00:00
October 1996 PNG specification, version 1.0). The third parameter is a
flag that indicates
1996-06-05 20:50:50 +00:00
which filter type(s) are to be tested for each scanline. See the
Compression Library for details on the specific filter types.
1996-01-26 07:38:47 +00:00
1998-02-09 02:56:40 +00:00
/* turn on or off filtering, and/or choose
specific filters */
1996-06-05 20:50:50 +00:00
png_set_filter(png_ptr, 0,
1998-02-09 02:56:40 +00:00
PNG_FILTER_NONE | PNG_FILTER_SUB |
PNG_FILTER_PAETH);
1996-06-05 20:50:50 +00:00
The png_set_compression_???() functions interface to the zlib compression
library, and should mostly be ignored unless you really know what you are
doing. The only generally useful call is png_set_compression_level()
which changes how much time zlib spends on trying to compress the image
data. See the Compression Library for details on the compression levels.
1996-01-26 07:38:47 +00:00
1996-06-05 20:50:50 +00:00
/* set the zlib compression level */
1998-02-09 02:56:40 +00:00
png_set_compression_level(png_ptr,
Z_BEST_COMPRESSION);
1996-06-05 20:50:50 +00:00
/* set other zlib parameters */
1996-01-26 07:38:47 +00:00
png_set_compression_mem_level(png_ptr, 8);
1998-02-09 02:56:40 +00:00
png_set_compression_strategy(png_ptr,
Z_DEFAULT_STRATEGY);
1996-01-26 07:38:47 +00:00
png_set_compression_window_bits(png_ptr, 15);
png_set_compression_method(png_ptr, 8);
You now need to fill in the png_info structure with all the data you
wish to write before the actual image. Note that the only thing you
are allowed to write after the image is the text chunks and the time
1996-06-05 20:50:50 +00:00
chunk (as of PNG Specification 1.0, anyway). See png_write_end() and
1996-01-26 07:38:47 +00:00
the latest PNG specification for more information on that. If you
1996-06-05 20:50:50 +00:00
wish to write them before the image, fill them in now, and flag that
data as being valid. If you want to wait until after the data, don't
fill them until png_write_end(). For all the fields in png_info and
their data types, see png.h. For explanations of what the fields
contain, see the PNG specification.
1996-01-10 08:56:49 +00:00
Some of the more important parts of the png_info are:
1998-02-09 02:56:40 +00:00
png_set_IHDR(png_ptr, info_ptr, width, height,
bit_depth, color_type, interlace_type,
compression_type, filter_type)
width - holds the width of the image
in pixels (up to 2^31).
height - holds the height of the image
in pixels (up to 2^31).
bit_depth - holds the bit depth of one of the
image channels.
(valid values are 1, 2, 4, 8, 16
and depend also on the
color_type. See also significant
bits (sBIT) below).
color_type - describes which color/alpha
channels are present.
PNG_COLOR_TYPE_GRAY
(bit depths 1, 2, 4, 8, 16)
PNG_COLOR_TYPE_GRAY_ALPHA
(bit depths 8, 16)
PNG_COLOR_TYPE_PALETTE
(bit depths 1, 2, 4, 8)
PNG_COLOR_TYPE_RGB
(bit_depths 8, 16)
PNG_COLOR_TYPE_RGB_ALPHA
(bit_depths 8, 16)
1997-05-16 07:46:07 +00:00
PNG_COLOR_MASK_PALETTE
PNG_COLOR_MASK_COLOR
PNG_COLOR_MASK_ALPHA
1998-02-28 13:00:24 +00:00
interlace_type - PNG_INTERLACE_NONE or
PNG_INTERLACE_ADAM7
1998-02-09 02:56:40 +00:00
compression_type - (must be
PNG_COMPRESSION_TYPE_DEFAULT)
filter_type - (must be PNG_FILTER_TYPE_DEFAULT)
1997-05-16 07:46:07 +00:00
1998-02-09 02:56:40 +00:00
png_set_PLTE(png_ptr, info_ptr, palette,
num_palette);
palette - the palette for the file
(array of png_color)
1996-01-26 07:38:47 +00:00
num_palette - number of entries in the palette
1997-05-16 07:46:07 +00:00
png_set_gAMA(png_ptr, info_ptr, gamma);
1998-02-09 02:56:40 +00:00
gamma - the gamma the image was created
at (PNG_INFO_gAMA)
1997-05-16 07:46:07 +00:00
1998-01-17 04:06:18 +00:00
png_set_sRGB(png_ptr, info_ptr, srgb_intent);
1998-02-09 02:56:40 +00:00
srgb_intent - the rendering intent
(PNG_INFO_sRGB) The presence of
the sRGB chunk means that the pixel
data is in the sRGB color space.
This chunk also implies specific
values of gAMA and cHRM. Rendering
intent is the CSS-1 property that
has been defined by the International
Color Consortium
(http://www.color.org).
It can be one of
PNG_SRGB_INTENT_SATURATION,
PNG_SRGB_INTENT_PERCEPTUAL,
PNG_SRGB_INTENT_ABSOLUTE, or
PNG_SRGB_INTENT_RELATIVE.
1998-01-31 03:45:12 +00:00
1998-01-17 04:06:18 +00:00
1998-02-09 02:56:40 +00:00
png_set_sRGB_gAMA_and_cHRM(png_ptr, info_ptr,
srgb_intent);
srgb_intent - the rendering intent
(PNG_INFO_sRGB) The presence of the
sRGB chunk means that the pixel
data is in the sRGB color space.
This function also causes gAMA and
cHRM chunks with the specific values
that are consistent with sRGB to be
written.
1998-01-17 04:06:18 +00:00
1997-05-16 07:46:07 +00:00
png_set_sBIT(png_ptr, info_ptr, sig_bit);
1998-02-09 02:56:40 +00:00
sig_bit - the number of significant bits for
(PNG_INFO_sBIT) each of the gray, red,
green, and blue channels, whichever are
appropriate for the given color type
(png_color_16)
png_set_tRNS(png_ptr, info_ptr, trans, num_trans,
trans_values);
trans - array of transparent entries for
palette (PNG_INFO_tRNS)
trans_values - transparent pixel for non-paletted
images (PNG_INFO_tRNS)
num_trans - number of transparent entries
(PNG_INFO_tRNS)
png_set_hIST(png_ptr, info_ptr, hist);
(PNG_INFO_hIST)
hist - histogram of palette (array of
png_color_16)
1997-05-16 07:46:07 +00:00
png_set_tIME(png_ptr, info_ptr, mod_time);
1998-02-09 02:56:40 +00:00
mod_time - time image was last modified
(PNG_VALID_tIME)
1997-05-16 07:46:07 +00:00
png_set_bKGD(png_ptr, info_ptr, background);
1996-06-05 20:50:50 +00:00
background - background color (PNG_VALID_bKGD)
1997-05-16 07:46:07 +00:00
png_set_text(png_ptr, info_ptr, text_ptr, num_text);
1998-02-09 02:56:40 +00:00
text_ptr - array of png_text holding image
comments
text_ptr[i]->key - keyword for comment.
text_ptr[i]->text - text comments for current
keyword.
text_ptr[i]->compression - type of compression used
on "text" PNG_TEXT_COMPRESSION_NONE or
PNG_TEXT_COMPRESSION_zTXt
num_text - number of comments in text_ptr
png_set_oFFs(png_ptr, info_ptr, offset_x, offset_y,
unit_type);
offset_x - positive offset from the left
edge of the screen
offset_y - positive offset from the top
edge of the screen
unit_type - PNG_OFFSET_PIXEL, PNG_OFFSET_MICROMETER
png_set_pHYs(png_ptr, info_ptr, res_x, res_y,
unit_type);
res_x - pixels/unit physical resolution
in x direction
res_y - pixels/unit physical resolution
in y direction
1998-02-28 13:00:24 +00:00
unit_type - PNG_RESOLUTION_UNKNOWN,
1998-02-09 02:56:40 +00:00
PNG_RESOLUTION_METER
1995-07-20 07:43:20 +00:00
1998-01-17 04:06:18 +00:00
In PNG files, the alpha channel in an image is the level of opacity.
If your data is supplied as a level of transparency, you can invert the
alpha channel before you write it, so that 0 is fully transparent and 255
(in 8-bit or paletted images) or 65535 (in 16-bit images) is fully opaque,
with
png_set_invert_alpha(png_ptr);
This must appear here instead of later with the other transformations
because in the case of paletted images the tRNS chunk data has to
be inverted before the tRNS chunk is written. If your image is not a
paletted image, the tRNS data (which in such cases represents a single
color to be rendered as transparent) won't be changed.
1995-07-20 07:43:20 +00:00
A quick word about text and num_text. text is an array of png_text
structures. num_text is the number of valid structures in the array.
If you want, you can use max_text to hold the size of the array, but
libpng ignores it for writing (it does use it for reading). Each
png_text structure holds a keyword-text value, and a compression type.
The compression types have the same valid numbers as the compression
types of the image data. Currently, the only valid number is zero.
However, you can store text either compressed or uncompressed, unlike
images which always have to be compressed. So if you don't want the
1997-05-16 07:46:07 +00:00
text compressed, set the compression type to PNG_TEXT_COMPRESSION_NONE.
Until text gets around 1000 bytes, it is not worth compressing it.
After the text has been written out to the file, the compression type
is set to PNG_TEXT_COMPRESSION_NONE_WR or PNG_TEXT_COMPRESSION_zTXt_WR,
so that it isn't written out again at the end (in case you are calling
png_write_end() with the same struct.
1996-06-05 20:50:50 +00:00
The keywords that are given in the PNG Specification are:
1998-02-09 02:56:40 +00:00
Title Short (one line) title or
caption for image
Author Name of image's creator
Description Description of image (possibly long)
Copyright Copyright notice
Creation Time Time of original image creation
1998-02-28 13:00:24 +00:00
(usually RFC 1123 format, see below)
1998-02-09 02:56:40 +00:00
Software Software used to create the image
Disclaimer Legal disclaimer
Warning Warning of nature of content
Source Device used to create the image
Comment Miscellaneous comment; conversion
from other image format
1995-07-20 07:43:20 +00:00
The keyword-text pairs work like this. Keywords should be short
simple descriptions of what the comment is about. Some typical
1998-02-28 13:00:24 +00:00
keywords are found in the PNG specification, as is some recommendations
1995-07-20 07:43:20 +00:00
on keywords. You can repeat keywords in a file. You can even write
some text before the image and some after. For example, you may want
to put a description of the image before the image, but leave the
disclaimer until after, so viewers working over modem connections
don't have to wait for the disclaimer to go over the modem before
they start seeing the image. Finally, keywords should be full
1996-06-05 20:50:50 +00:00
words, not abbreviations. Keywords and text are in the ISO 8859-1
(Latin-1) character set (a superset of regular ASCII) and can not
contain NUL characters, and should not contain control or other
unprintable characters. To make the comments widely readable, stick
with basic ASCII, and avoid machine specific character set extensions
like the IBM-PC character set. The keyword must be present, but
1995-07-20 07:43:20 +00:00
you can leave off the text string on non-compressed pairs.
Compressed pairs must have a text string, as only the text string
is compressed anyway, so the compression would be meaningless.
1995-12-19 09:22:19 +00:00
PNG supports modification time via the png_time structure. Two
1995-07-20 07:43:20 +00:00
conversion routines are proved, png_convert_from_time_t() for
time_t and png_convert_from_struct_tm() for struct tm. The
time_t routine uses gmtime(). You don't have to use either of
these, but if you wish to fill in the png_time structure directly,
you should provide the time in universal time (GMT) if possible
1996-01-10 08:56:49 +00:00
instead of your local time. Note that the year number is the full
1998-02-28 13:00:24 +00:00
year (e.g. 1998, rather than 98 - PNG is year 2000 compliant!), and
1997-05-16 07:46:07 +00:00
that months start with 1.
1995-07-20 07:43:20 +00:00
1998-01-01 13:13:13 +00:00
If you want to store the time of the original image creation, you should
use a plain tEXt chunk with the "Creation Time" keyword. This is
necessary because the "creation time" of a PNG image is somewhat vague,
depending on whether you mean the PNG file, the time the image was
created in a non-PNG format, a still photo from which the image was
scanned, or possibly the subject matter itself. In order to facilitate
machine-readable dates, it is recommended that the "Creation Time"
1998-02-28 13:00:24 +00:00
tEXt chunk use RFC 1123 format dates (e.g. 22 May 1997 18:07:10 GMT"),
1998-01-01 13:13:13 +00:00
although this isn't a requirement. Unlike the tIME chunk, the
"Creation Time" tEXt chunk is not expected to be automatically changed
by the software. To facilitate the use of RFC 1123 dates, a function
1998-01-17 04:06:18 +00:00
png_convert_to_rfc1123(png_timep) is provided to convert from PNG
time to an RFC 1123 format string.
1998-01-01 13:13:13 +00:00
1995-07-20 07:43:20 +00:00
You are now ready to write all the file information up to the actual
image data. You do this with a call to png_write_info().
1996-01-26 07:38:47 +00:00
png_write_info(png_ptr, info_ptr);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
After you've written the file information, you can set up the library
to handle any special transformations of the image data. The various
1995-07-20 07:43:20 +00:00
ways to transform the data will be described in the order that they
1996-01-26 07:38:47 +00:00
should occur. This is important, as some of these change the color
type and/or bit depth of the data, and some others only work on
certain color types and bit depths. Even though each transformation
1998-02-28 13:00:24 +00:00
checks to see if it has data that it can do something with, you should
1996-01-26 07:38:47 +00:00
make sure to only enable a transformation if it will be valid for the
data. For example, don't swap red and blue on grayscale data.
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
PNG files store RGB pixels packed into 3 bytes. This code tells
the library to expect input data with 4 bytes per pixel
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
where the 0 is the value that will be put in the 4th byte, and the
location is either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending
upon whether the filler byte is stored XRGB or RGBX.
1995-07-20 07:43:20 +00:00
PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as
they can, resulting in, for example, 8 pixels per byte for 1 bit files.
1996-01-10 08:56:49 +00:00
If the data is supplied at 1 pixel per byte, use this code, which will
1996-06-05 20:50:50 +00:00
correctly pack the pixels into a single byte:
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_set_packing(png_ptr);
1995-07-20 07:43:20 +00:00
PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your
1996-06-05 20:50:50 +00:00
data is of another bit depth, you can write an sBIT chunk into the
file so that decoders can get the original data if desired.
1996-01-26 07:38:47 +00:00
1996-06-05 20:50:50 +00:00
/* Set the true bit depth of the image data */
1997-05-16 07:46:07 +00:00
if (color_type & PNG_COLOR_MASK_COLOR)
1996-01-26 07:38:47 +00:00
{
1997-05-16 07:46:07 +00:00
sig_bit.red = true_bit_depth;
sig_bit.green = true_bit_depth;
sig_bit.blue = true_bit_depth;
1996-01-26 07:38:47 +00:00
}
else
{
1997-05-16 07:46:07 +00:00
sig_bit.gray = true_bit_depth;
1996-01-26 07:38:47 +00:00
}
1997-05-16 07:46:07 +00:00
if (color_type & PNG_COLOR_MASK_ALPHA)
1996-01-26 07:38:47 +00:00
{
1997-05-16 07:46:07 +00:00
sig_bit.alpha = true_bit_depth;
1996-01-26 07:38:47 +00:00
}
1997-05-16 07:46:07 +00:00
png_set_sBIT(png_ptr, info_ptr, &sig_bit);
1996-06-05 20:50:50 +00:00
If the data is stored in the row buffer in a bit depth other than
1998-02-28 13:00:24 +00:00
one supported by PNG (e.g. 3 bit data in the range 0-7 for a 4-bit PNG),
1996-06-05 20:50:50 +00:00
this will scale the values to appear to be the correct bit depth as
is required by PNG.
1997-05-16 07:46:07 +00:00
png_set_shift(png_ptr, &sig_bit);
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
PNG files store 16 bit pixels in network byte order (big-endian,
1996-01-26 07:38:47 +00:00
ie. most significant bits first). This code would be used if they are
1998-02-28 13:00:24 +00:00
supplied the other way (little-endian, i.e. least significant bits
first, the way PCs store them):
1995-07-20 07:43:20 +00:00
1997-05-16 07:46:07 +00:00
if (bit_depth > 8)
png_set_swap(png_ptr);
If you are using packed-pixel images (1, 2, or 4 bits/pixel), and you
need to change the order the pixels are packed into bytes, you can use:
if (bit_depth < 8)
png_set_packswap(png_ptr);
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
PNG files store 3 color pixels in red, green, blue order. This code
1996-01-26 07:38:47 +00:00
would be used if they are supplied as blue, green, red:
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_set_bgr(png_ptr);
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
PNG files describe monochrome as black being zero and white being
1996-01-26 07:38:47 +00:00
one. This code would be used if the pixels are supplied with this reversed
1996-01-10 08:56:49 +00:00
(black being one and white being zero):
1995-07-20 07:43:20 +00:00
1998-01-31 03:45:12 +00:00
png_set_invert_mono(png_ptr);
1995-07-20 07:43:20 +00:00
1998-03-07 12:06:55 +00:00
Finally, you can write your own transformation function if none of
the existing ones meets your needs. This is done by setting a callback
with
png_set_write_user_transform_fn(png_ptr,
write_transform_fn);
You must supply the function
void write_transform_fn(png_ptr ptr, row_info_ptr
row_info, png_bytep data)
See pngtest.c for a working example. Your function will be called
before any of the other transformations have been processed.
1996-06-05 20:50:50 +00:00
It is possible to have libpng flush any pending output, either manually,
or automatically after a certain number of lines have been written. To
flush the output stream a single time call:
png_write_flush(png_ptr);
and to have libpng flush the output stream periodically after a certain
number of scanlines have been written, call:
png_set_flush(png_ptr, nrows);
Note that the distance between rows is from the last time png_write_flush()
was called, or the first row of the image if it has never been called.
So if you write 50 lines, and then png_set_flush 25, it will flush the
output on the next scanline, and every 25 lines thereafter, unless
1998-02-28 13:00:24 +00:00
png_write_flush() is called before 25 more lines have been written.
1996-06-05 20:50:50 +00:00
If nrows is too small (less than about 10 lines for a 640 pixel wide
1998-02-28 13:00:24 +00:00
RGB image) the image compression may decrease noticeably (although this
1996-06-05 20:50:50 +00:00
may be acceptable for real-time applications). Infrequent flushing will
only degrade the compression performance by a few percent over images
that do not use flushing.
1995-07-20 07:43:20 +00:00
That's it for the transformations. Now you can write the image data.
The simplest way to do this is in one function call. If have the
whole image in memory, you can just call png_write_image() and libpng
will write the image. You will need to pass in an array of pointers to
each row. This function automatically handles interlacing, so you don't
need to call png_set_interlace_handling() or call this function multiple
times, or any of that other stuff necessary with png_write_rows().
1996-01-26 07:38:47 +00:00
png_write_image(png_ptr, row_pointers);
1995-07-20 07:43:20 +00:00
where row_pointers is:
1996-01-26 07:38:47 +00:00
png_bytef *row_pointers[height];
1995-07-20 07:43:20 +00:00
You can point to void or char or whatever you use for pixels.
If you can't want to write the whole image at once, you can
use png_write_rows() instead. If the file is not interlaced,
this is simple:
1998-02-09 02:56:40 +00:00
png_write_rows(png_ptr, row_pointers,
number_of_rows);
1995-07-20 07:43:20 +00:00
row_pointers is the same as in the png_write_image() call.
1996-01-26 07:38:47 +00:00
If you are just writing one row at a time, you can do this with
1995-07-20 07:43:20 +00:00
row_pointers:
1996-06-05 20:50:50 +00:00
png_bytep row_pointer = row;
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
png_write_row(png_ptr, &row_pointer);
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
When the file is interlaced, things can get a good deal more
1998-02-28 13:00:24 +00:00
complicated. The only currently (as of February 1998 -- PNG Specification
version 1.0, dated October 1996) defined interlacing scheme for PNG files
is the "Adam7" interlace scheme, that breaks down an
1996-01-26 07:38:47 +00:00
image into seven smaller images of varying size. libpng will build
these images for you, or you can do them yourself. If you want to
build them yourself, see the PNG specification for details of which
pixels to write when.
1995-07-20 07:43:20 +00:00
If you don't want libpng to handle the interlacing details, just
1996-06-05 20:50:50 +00:00
use png_set_interlace_handling() and call png_write_rows() the
correct number of times to write all seven sub-images.
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
If you want libpng to build the sub-images, call this before you start
writing any rows:
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
number_of_passes =
png_set_interlace_handling(png_ptr);
1995-07-20 07:43:20 +00:00
This will return the number of passes needed. Currently, this
is seven, but may change if another interlace type is added.
1998-01-17 04:06:18 +00:00
Then write the complete image number_of_passes times.
1995-07-20 07:43:20 +00:00
1998-02-09 02:56:40 +00:00
png_write_rows(png_ptr, row_pointers,
number_of_rows);
1995-07-20 07:43:20 +00:00
As some of these rows are not used, and thus return immediately,
you may want to read about interlacing in the PNG specification,
and only update the rows that are actually used.
After you are finished writing the image, you should finish writing
the file. If you are interested in writing comments or time, you should
1998-01-31 03:45:12 +00:00
pass an appropriately filled png_info pointer. If you are not interested,
you can pass NULL.
1995-07-20 07:43:20 +00:00
1996-01-26 07:38:47 +00:00
png_write_end(png_ptr, info_ptr);
1995-07-20 07:43:20 +00:00
When you are done, you can free all memory used by libpng like this:
1996-06-05 20:50:50 +00:00
png_destroy_write_struct(&png_ptr, &info_ptr);
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
You must free any data you allocated for info_ptr, such as comments,
palette, or histogram, before the call to png_destroy_write_struct();
1995-07-20 07:43:20 +00:00
1996-06-05 20:50:50 +00:00
For a more compact example of writing a PNG image, see the file example.c.
1995-07-20 07:43:20 +00:00
1996-01-10 08:56:49 +00:00
V. Modifying/Customizing libpng:
1995-07-20 07:43:20 +00:00
There are two issues here. The first is changing how libpng does
standard things like memory allocation, input/output, and error handling.
The second deals with more complicated things like adding new chunks,
adding new transformations, and generally changing how libpng works.
1997-05-16 07:46:07 +00:00
All of the memory allocation, input/output, and error handling in libpng
1998-02-28 13:00:24 +00:00
goes through callbacks which are user settable. The default routines are
1997-05-16 07:46:07 +00:00
in pngmem.c, pngrio.c, pngwio.c, and pngerror.c respectively. To change
1998-02-28 13:00:24 +00:00
these functions, call the appropriate png_set_???_fn() function.
1995-12-19 09:22:19 +00:00
Memory allocation is done through the functions png_large_malloc(),
1996-06-05 20:50:50 +00:00
png_malloc(), png_realloc(), png_large_free(), and png_free(). These
currently just call the standard C functions. The large functions must
handle exactly 64K, but they don't have to handle more than that. If
1997-05-16 07:46:07 +00:00
your pointers can't access more then 64K at a time, you will want to set
MAXSEG_64K in zlib.h. Since it is unlikely that the method of handling
memory allocation on a platform will change between applications, these
functions must be modified in the library at compile time.
1998-01-17 04:06:18 +00:00
Input/Output in libpng is done through png_read() and png_write(),
1997-05-16 07:46:07 +00:00
which currently just call fread() and fwrite(). The FILE * is stored in
png_struct and is initialized via png_init_io(). If you wish to change
the method of I/O, the library supplies callbacks that you can set
through the function png_set_read_fn() and png_set_write_fn() at run
time, instead of calling the png_init_io() function. These functions
also provide a void pointer that can be retrieved via the function
1995-12-19 09:22:19 +00:00
png_get_io_ptr(). For example:
1998-02-09 02:56:40 +00:00
png_set_read_fn(png_structp png_ptr,
voidp io_ptr, png_rw_ptr read_data_fn)
1995-12-19 09:22:19 +00:00
1998-02-09 02:56:40 +00:00
png_set_write_fn(png_structp png_ptr,
voidp io_ptr, png_rw_ptr write_data_fn,
png_flush_ptr output_flush_fn);
1995-12-19 09:22:19 +00:00
1996-01-26 07:38:47 +00:00
voidp io_ptr = png_get_io_ptr(png_ptr);
1995-12-19 09:22:19 +00:00
1996-01-10 08:56:49 +00:00
The replacement I/O functions should have prototypes as follows:
1998-02-09 02:56:40 +00:00
void user_read_data(png_structp png_ptr,
png_bytep data, png_uint_32 length);
void user_write_data(png_structp png_ptr,
png_bytep data, png_uint_32 length);
1996-01-26 07:38:47 +00:00
void user_flush_data(png_structp png_ptr);
1996-01-10 08:56:49 +00:00
1996-01-16 07:51:56 +00:00
Supplying NULL for the read, write, or flush functions sets them back
to using the default C stream functions. It is an error to read from
a write stream, and vice versa.
1995-12-19 09:22:19 +00:00
Error handling in libpng is done through png_error() and png_warning().
Errors handled through png_error() are fatal, meaning that png_error()
1997-05-16 07:46:07 +00:00
should never return to its caller. Currently, this is handled via
1995-12-19 09:22:19 +00:00
setjmp() and longjmp(), but you could change this to do things like
1996-01-10 08:56:49 +00:00
exit() if you should wish. On non-fatal errors, png_warning() is called
to print a warning message, and then control returns to the calling code.
1996-06-05 20:50:50 +00:00
By default png_error() and png_warning() print a message on stderr via
fprintf() unless the library is compiled with PNG_NO_STDIO defined. If
1996-01-10 08:56:49 +00:00
you wish to change the behavior of the error functions, you will need to
1996-06-05 20:50:50 +00:00
set up your own message callbacks. These functions are normally supplied
at the time that the png_struct is created. It is also possible to change
these functions after png_create_???_struct() has been called by calling:
1995-11-28 17:22:13 +00:00
1998-02-09 02:56:40 +00:00
png_set_error_fn(png_structp png_ptr,
png_voidp error_ptr, png_error_ptr error_fn,
png_error_ptr warning_fn);
1995-11-28 17:22:13 +00:00
1996-06-05 20:50:50 +00:00
png_voidp error_ptr = png_get_error_ptr(png_ptr);
1996-01-10 08:56:49 +00:00
1996-06-05 20:50:50 +00:00
If NULL is supplied for either error_fn or warning_fn, then the libpng
default function will be used, calling fprintf() and/or longjmp() if a
problem is encountered. The replacement error functions should have
parameters as follows:
1996-01-10 08:56:49 +00:00
1998-02-09 02:56:40 +00:00
void user_error_fn(png_structp png_ptr,
png_const_charp error_msg);
void user_warning_fn(png_structp png_ptr,
png_const_charp warning_msg);
1996-01-10 08:56:49 +00:00
The motivation behind using setjmp() and longjmp() is the C++ throw and
catch exception handling methods. This makes the code much easier to write,
as there is no need to check every return code of every function call.
However, there are some uncertainties about the status of local variables
after a longjmp, so the user may want to be careful about doing anything after
1997-05-16 07:46:07 +00:00
setjmp returns non-zero besides returning itself. Consult your compiler
1996-01-10 08:56:49 +00:00
documentation for more details.
1995-11-28 17:22:13 +00:00
1995-07-20 07:43:20 +00:00
If you need to read or write custom chunks, you will need to get deeper
1996-06-05 20:50:50 +00:00
into the libpng code, as a mechanism has not yet been supplied for user
callbacks with custom chunks. First, read the PNG specification, and have
a first level of understanding of how it works. Pay particular attention
to the sections that describe chunk names, and look at how other chunks
were designed, so you can do things similarly. Second, check out the
sections of libpng that read and write chunks. Try to find a chunk that
is similar to yours and copy off of it. More details can be found in the
comments inside the code. A way of handling unknown chunks in a generic
method, potentially via callback functions, would be best.
If you wish to write your own transformation for the data, look through
the part of the code that does the transformations, and check out some of
the simpler ones to get an idea of how they work. Try to find a similar
transformation to the one you want to add and copy off of it. More details
can be found in the comments inside the code itself.
1995-07-20 07:43:20 +00:00
Configuring for 16 bit platforms:
1996-06-05 20:50:50 +00:00
You may need to change the png_large_malloc() and png_large_free()
1998-02-28 13:00:24 +00:00
routines in pngmem.c, as these are required to allocate 64K, although
1996-06-05 20:50:50 +00:00
there is already support for many of the common DOS compilers. Also,
you will want to look into zconf.h to tell zlib (and thus libpng) that
it cannot allocate more then 64K at a time. Even if you can, the memory
1998-02-28 13:00:24 +00:00
won't be accessible. So limit zlib and libpng to 64K by defining MAXSEG_64K.
1995-07-20 07:43:20 +00:00
1996-01-16 07:51:56 +00:00
Configuring for DOS:
For DOS users which only have access to the lower 640K, you will
have to limit zlib's memory usage via a png_set_compression_mem_level()
call. See zlib.h or zconf.h in the zlib library for more information.
1995-12-19 09:22:19 +00:00
Configuring for Medium Model:
Libpng's support for medium model has been tested on most of the popular
1998-01-17 04:06:18 +00:00
compilers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets
1996-01-10 08:56:49 +00:00
defined, and FAR gets defined to far in pngconf.h, and you should be
1995-12-19 09:22:19 +00:00
all set. Everything in the library (except for zlib's structure) is
expecting far data. You must use the typedefs with the p or pp on
the end for pointers (or at least look at them and be careful). Make
note that the row's of data are defined as png_bytepp which is a
1996-01-16 07:51:56 +00:00
unsigned char far * far *.
1995-12-19 09:22:19 +00:00
1995-07-20 07:43:20 +00:00
Configuring for gui/windowing platforms:
1996-06-05 20:50:50 +00:00
You will need to write new error and warning functions that use the GUI
interface, as described previously, and set them to be the error and
warning functions at the time that png_create_???_struct() is called,
in order to have them available during the structure initialization.
1998-02-28 13:00:24 +00:00
They can be changed later via png_set_error_fn(). On some compilers,
1996-06-05 20:50:50 +00:00
you may also have to change the memory allocators (png_malloc, etc.).
1995-12-19 09:22:19 +00:00
1995-07-20 07:43:20 +00:00
Configuring for compiler xxx:
1996-01-10 08:56:49 +00:00
All includes for libpng are in pngconf.h. If you need to add/change/delete
1995-07-20 07:43:20 +00:00
an include, this is the place to do it. The includes that are not
needed outside libpng are protected by the PNG_INTERNAL definition,
which is only defined for those routines inside libpng itself. The
1996-01-16 07:51:56 +00:00
files in libpng proper only include png.h, which includes pngconf.h.
Configuring zlib:
1996-06-05 20:50:50 +00:00
There are special functions to configure the compression. Perhaps the
most useful one changes the compression level, which currently uses
input compression values in the range 0 - 9. The library normally
1997-05-16 07:46:07 +00:00
uses the default compression level (Z_DEFAULT_COMPRESSION = 6). Tests
have shown that for a large majority of images, compression values in
1998-01-17 04:06:18 +00:00
the range 3-6 compress nearly as well as higher levels, and do so much
faster. For online applications it may be desirable to have maximum speed
1996-06-05 20:50:50 +00:00
(Z_BEST_SPEED = 1). With versions of zlib after v0.99, you can also
specify no compression (Z_NO_COMPRESSION = 0), but this would create
files larger than just storing the raw bitmap. You can specify the
compression level by calling:
1996-01-16 07:51:56 +00:00
1997-05-16 07:46:07 +00:00
png_set_compression_level(png_ptr, level);
1996-01-16 07:51:56 +00:00
Another useful one is to reduce the memory level used by the library.
The memory level defaults to 8, but it can be lowered if you are
short on memory (running DOS, for example, where you only have 640K).
1996-01-26 07:38:47 +00:00
png_set_compression_mem_level(png_ptr, level);
1996-01-16 07:51:56 +00:00
1997-05-16 07:46:07 +00:00
The other functions are for configuring zlib. They are not recommended
for normal use and may result in writing an invalid PNG file. See
zlib.h for more information on what these mean.
1998-02-09 02:56:40 +00:00
png_set_compression_strategy(png_ptr,
strategy);
png_set_compression_window_bits(png_ptr,
window_bits);
1997-05-16 07:46:07 +00:00
png_set_compression_method(png_ptr, method);
Controlling row filtering:
If you want to control whether libpng uses filtering or not, which
filters are used, and how it goes about picking row filters, you
1998-01-31 03:45:12 +00:00
can call one of these functions. The selection and configuration
of row filters can have a significant impact on the size and
encoding speed and a somewhat lesser impact on the decoding speed
of an image. Filtering is enabled by default for RGB and grayscale
images (with and without alpha), and for 8-bit paletted images, but
not for paletted images with bit depths less than 8 bits/pixel.
The 'method' parameter sets the main filtering method, which is
currently only '0' in the PNG 1.0 specification. The 'filters'
parameter sets which filter(s), if any, should be used for each
scanline. Possible values are PNG_ALL_FILTERS and PNG_NO_FILTERS
to turn filtering on and off, respectively.
1996-06-05 20:50:50 +00:00
Individual filter types are PNG_FILTER_NONE, PNG_FILTER_SUB,
PNG_FILTER_UP, PNG_FILTER_AVG, PNG_FILTER_PAETH, which can be bitwise
ORed together '|' to specify one or more filters to use. These
filters are described in more detail in the PNG specification. If
you intend to change the filter type during the course of writing
the image, you should start with flags set for all of the filters
you intend to use so that libpng can initialize its internal
structures appropriately for all of the filter types.
1998-02-09 02:56:40 +00:00
filters = PNG_FILTER_NONE | PNG_FILTER_SUB
| PNG_FILTER_UP;
png_set_filter(png_ptr, PNG_FILTER_TYPE_BASE,
filters);
1997-05-16 07:46:07 +00:00
It is also possible to influence how libpng chooses from among the
available filters. This is done in two ways - by telling it how
important it is to keep the same filter for successive rows, and
by telling it the relative computational costs of the filters.
double weights[3] = {1.5, 1.3, 1.1},
1998-02-09 02:56:40 +00:00
costs[PNG_FILTER_VALUE_LAST] =
{1.0, 1.3, 1.3, 1.5, 1.7};
1997-05-16 07:46:07 +00:00
1998-02-09 02:56:40 +00:00
png_set_filter_selection(png_ptr,
PNG_FILTER_SELECTION_WEIGHTED, 3,
weights, costs);
1997-05-16 07:46:07 +00:00
The weights are multiplying factors which indicate to libpng that row
should be the same for successive rows unless another row filter is that
many times better than the previous filter. In the above example, if
the previous 3 filters were SUB, SUB, NONE, the SUB filter could have a
"sum of absolute differences" 1.5 x 1.3 times higher than other filters
and still be chosen, while the NONE filter could have a sum 1.1 times
higher than other filters and still be chosen. Unspecified weights are
taken to be 1.0, and the specified weights should probably be declining
like those above in order to emphasize recent filters over older filters.
The filter costs specify for each filter type a relative decoding cost
to be considered when selecting row filters. This means that filters
with higher costs are less likely to be chosen over filters with lower
costs, unless their "sum of absolute differences" is that much smaller.
The costs do not necessarily reflect the exact computational speeds of
1998-02-28 13:00:24 +00:00
the various filters, since this would unduly influence the final image
1997-05-16 07:46:07 +00:00
size.
Note that the numbers above were invented purely for this example and
are given only to help explain the function usage. Little testing has
been done to find optimum values for either the costs or the weights.
1995-07-20 07:43:20 +00:00
1995-09-26 10:22:39 +00:00
Removing unwanted object code:
1996-01-10 08:56:49 +00:00
There are a bunch of #define's in pngconf.h that control what parts of
1997-05-16 07:46:07 +00:00
libpng are compiled. All the defines end in _SUPPORTED. If you are
1996-06-05 20:50:50 +00:00
never going to use an ability, you can change the #define to #undef
1998-01-17 04:06:18 +00:00
before recompiling libpng and save yourself code and data space.
1998-03-07 12:06:55 +00:00
You can also turn a number of them off en masse with a compiler directive
that defines PNG_READ[or WRITE]_TRANSFORMS_NOT_SUPPORTED, or
1998-01-31 03:45:12 +00:00
PNG_READ[or WRITE]_ANCILLARY_CHUNKS_NOT_SUPPORTED, or all four,
1998-01-17 04:06:18 +00:00
along with directives to turn on any of the capabilities that you do
1998-03-07 12:06:55 +00:00
want. The PNG_READ[or WRITE]_TRANSFORMS_NOT_SUPPORTED directives disable
the extra transformations but still leave the library fully capable of reading
1998-01-31 03:45:12 +00:00
and writing PNG files with all known public chunks [except for sPLT].
Use of the PNG_READ[or WRITE]_ANCILLARY_CHUNKS_NOT_SUPPORTED directive
produces a library that is incapable of reading or writing ancillary chunks.
1998-03-07 12:06:55 +00:00
If you are not using the progressive reading capability, you can
turn that off with PNG_PROGRESSIVE_READ_NOT_SUPPORTED (don't confuse
this with the INTERLACING capability, which you'll still have).
1998-01-17 04:06:18 +00:00
All the reading and writing specific code are in separate files, so the
1996-06-05 20:50:50 +00:00
linker should only grab the files it needs. However, if you want to
make sure, or if you are building a stand alone library, all the
reading files start with pngr and all the writing files start with
pngw. The files that don't match either (like png.c, pngtrans.c, etc.)
are used for both reading and writing, and always need to be included.
The progressive reader is in pngpread.c
If you are creating or distributing a dynamically linked library (a .so
1997-05-16 07:46:07 +00:00
or DLL file), you should not remove or disable any parts of the library,
as this will cause applications linked with different versions of the
library to fail if they call functions not available in your library.
The size of the library itself should not be an issue, because only
those sections which are actually used will be loaded into memory.
Changes to Libpng from version 0.88
1998-01-17 04:06:18 +00:00
It should be noted that versions of libpng later than 0.96 are not
distributed by the original libpng author, Guy Schalnat, nor by
Andreas Dilger, who had taken over from Guy during 1996 and 1997, and
distributed versions 0.89 through 0.96, but rather by another member
of the original PNG Group, Glenn Randers-Pehrson. Guy and Andreas are
still alive and well, but they have moved on to other things.
1997-05-16 07:46:07 +00:00
The old libpng functions png_read_init(), png_write_init(),
png_info_init(), png_read_destroy(), and png_write_destory() have been
moved to PNG_INTERNAL in version 0.95 to discourage their use. The
preferred method of creating and initializing the libpng structures is
via the png_create_read_struct(), png_create_write_struct(), and
1996-06-05 20:50:50 +00:00
png_create_info_struct() because they isolate the size of the structures
1997-05-16 07:46:07 +00:00
from the application, allow version error checking, and also allow the
use of custom error handling routines during the initialization, which
the old functions do not. The functions png_read_destroy() and
png_write_destroy() do not actually free the memory that libpng
allocated for these structs, but just reset the data structures, so they
can be used instead of png_destroy_read_struct() and
png_destroy_write_struct() if you feel there is too much system overhead
allocating and freeing the png_struct for each image read.
1996-06-05 20:50:50 +00:00
Setting the error callbacks via png_set_message_fn() before
png_read_init() as was suggested in libpng-0.88 is no longer supported
because this caused applications which do not use custom error functions
to fail if the png_ptr was not initialized to zero. It is still possible
to set the error callbacks AFTER png_read_init(), or to change them with
png_set_error_fn(), which is essentially the same function, but with a
1997-05-16 07:46:07 +00:00
new name to force compilation errors with applications that try to use
the old method.
1998-02-09 02:56:40 +00:00