Rebrand! Rebrand!

CMakeLists.txt

@@ -1,7 +1,7 @@
 cmake_minimum_required(VERSION 3.17.0)
 
 # Start Project
-project(trampoline)
+project(runtime)
 
 # Headers
 add_library(trampoline-headers INTERFACE)
@@ -11,21 +11,23 @@ target_include_directories(trampoline-headers INTERFACE include)
 if(NOT TRAMPOLINE_HEADERS_ONLY)
     # Check Architecture
     include(CheckSymbolExists)
-    check_symbol_exists("__aarch64__" "" USE_NATIVE_TRAMPOLINE)
-    check_symbol_exists("__x86_64__" "" USE_QEMU_TRAMPOLINE)
+    check_symbol_exists("__aarch64__" "" USE_NATIVE_RUNTIME)
+    check_symbol_exists("__x86_64__" "" USE_QEMU_RUNTIME)
 
     # Include Correct Sub-Project
-    if(USE_NATIVE_TRAMPOLINE)
+    set(RUNTIME_RPATH "$ORIGIN/../lib/native")
+    set(RUNTIME_EXTRA_LINK_FLAG "--disable-new-dtags")
+    target_compile_definitions(trampoline-headers INTERFACE MCPI_BUILD_RUNTIME)
+    if(USE_NATIVE_RUNTIME)
         add_subdirectory(native)
-        target_compile_definitions(trampoline-headers INTERFACE MCPI_USE_NATIVE_TRAMPOLINE)
-    elseif(USE_QEMU_TRAMPOLINE)
+    elseif(USE_QEMU_RUNTIME)
         add_subdirectory(qemu)
-        target_compile_definitions(trampoline-headers INTERFACE MCPI_USE_QEMU)
+        target_compile_definitions(trampoline-headers INTERFACE MCPI_RUNTIME_IS_QEMU)
     else()
         message(FATAL_ERROR "Unsupported Architecture")
     endif()
 else()
     # No-Op Install Function
-    function(install_trampoline)
+    function(install_runtime)
     endfunction()
 endif()

README.md

@@ -0,0 +1,19 @@
+# MCPI Runtime
+**Fact:** MCPI is a 32-bit ARM binary.
+
+**Another fact:** Most modern computers do not use 32-bit ARM and therefore cannot run MCPI natively.
+
+**Solution:** This project allows MCPI to run on modern computers.
+
+## How
+This project works differently depending on the host system's architecture.
+
+### 64-Bit x86 Host
+On this platform, a patched version of QEMU is used.
+
+QEMU emulates ARM code so MCPI can run on x86 hardware. And the patch adds a system-call which allows MCPI to run graphics code on the host. This prevents the need for emulated GPU drivers.
+
+### 64-Bit ARM Host
+QEMU is not necessary on this platform because it can already run 32-bit ARM code natively.
+
+Instead, the runtime is implemented as two processes: a parent and a child. The child becomes MCPI and can send graphics commands to the parent. And because the parent is 64-bit, 32-bit drivers are not needed.

include/trampoline/types.h

@@ -2,26 +2,21 @@
 
 #include <stdint.h>
 
-// Switch Between Pipe?PTrace Mode
-#ifdef MCPI_USE_NATIVE_TRAMPOLINE
-#define TRAMPOLINE_USE_PTRACE_ENV "_MCPI_TRAMPOLINE_USE_PTRACE"
-#endif
+// Maximum Arguments Length
+#define MAX_TRAMPOLINE_ARGS_SIZE 2097152 // 2 MiB
 
 // System Call Constants
-#define MAX_TRAMPOLINE_ARGS_SIZE 2097152 // 2 MiB
 #define TRAMPOLINE_SYSCALL 0x1337
 
 // Pipe Constants
-#ifdef MCPI_USE_NATIVE_TRAMPOLINE
 #define TRAMPOLINE_ARGUMENTS_PIPE_ENV "_MCPI_TRAMPOLINE_ARGUMENTS"
 #define TRAMPOLINE_RETURN_VALUE_PIPE_ENV "_MCPI_TRAMPOLINE_RETURN_VALUE"
 struct trampoline_pipe_arguments {
     uint32_t id;
+    uint32_t allow_early_return;
     uint32_t length;
-    uint32_t args_addr;
 };
-#endif
 
 // Function Types
-typedef void (*trampoline_writer_t)(uint32_t guest_addr, void *data, uint32_t size);
+typedef void (*trampoline_writer_t)(uint32_t guest_addr, const void *data, uint32_t size);
 typedef uint32_t (*trampoline_t)(trampoline_writer_t writer, uint32_t id, const unsigned char *args);

native/CMakeLists.txt

@@ -1,27 +1,25 @@
-project(native-trampoline)
+project(native-runtime)
 
 # Build
-add_executable(trampoline
+add_executable(runtime
     src/memory.cpp
     src/main.cpp
     src/trampoline.cpp
-    src/ptrace/loop.cpp
-    src/ptrace/init.cpp
-    src/pipe/pipe.cpp
+    src/pipe.cpp
     src/signals.cpp
 )
 
 # Warnings
-target_compile_options(trampoline PRIVATE -Wall -Wextra -Werror -Wpointer-arith -Wshadow -Wnull-dereference)
+target_compile_options(runtime PRIVATE -Wall -Wextra -Werror -Wpointer-arith -Wshadow -Wnull-dereference)
 
 # Link
-target_link_libraries(trampoline dl trampoline-headers)
+target_link_libraries(runtime dl rt trampoline-headers)
 
 # RPath
-set_target_properties(trampoline PROPERTIES INSTALL_RPATH "$ORIGIN/../lib/native")
-target_link_options(trampoline PRIVATE "LINKER:--disable-new-dtags")
+set_target_properties(runtime PROPERTIES INSTALL_RPATH "${RUNTIME_RPATH}")
+target_link_options(runtime PRIVATE "LINKER:${RUNTIME_EXTRA_LINK_FLAG}")
 
 # Install
-function(install_trampoline bin_dir)
-    install(TARGETS trampoline DESTINATION "${bin_dir}")
+function(install_runtime bin_dir)
+    install(TARGETS runtime DESTINATION "${bin_dir}")
 endfunction()

native/src/log.h

@@ -5,6 +5,6 @@
 
 #define ERR(format, ...) \
     { \
-        fprintf(stderr, "TRAMPOLINE ERROR: " format "\n", ##__VA_ARGS__); \
+        fprintf(stderr, "RUNTIME ERROR: " format "\n", ##__VA_ARGS__); \
          exit(EXIT_FAILURE); \
     }

native/src/main.cpp

@@ -2,12 +2,12 @@
 #include <cstring>
 #include <cerrno>
 #include <sys/wait.h>
+#include <sys/prctl.h>
 
 #include "log.h"
 #include "memory.h"
 #include "trampoline.h"
-#include "ptrace/ptrace.h"
-#include "pipe/pipe.h"
+#include "pipe.h"
 #include "signals.h"
 
 // Main
@@ -16,11 +16,8 @@ int main(__attribute__((unused)) int argc, char *argv[]) {
     if (argc < 2) {
         ERR("Invalid Arguments");
     }
-    bool use_ptrace = getenv(TRAMPOLINE_USE_PTRACE_ENV) != nullptr;
     // Setup
-    if (!use_ptrace) {
-        init_pipe_common();
-    }
+    init_pipe_common();
     // Fork
     pid_t pid = fork();
     if (pid == -1) {
@@ -28,11 +25,9 @@ int main(__attribute__((unused)) int argc, char *argv[]) {
     } else if (pid == 0) {
         // Setup
         setpgid(0, 0);
-        if (use_ptrace) {
-            init_ptrace_guest();
-        } else {
-            init_pipe_guest();
-        }
+        init_pipe_guest();
+        // Kill Child If Parent Exits First
+        prctl(PR_SET_PDEATHSIG, SIGKILL);
         // Execute Program
         execvp(argv[1], (char *const *) &argv[1]);
         ERR("Unable To Execute Program: %s: %s", argv[1], strerror(errno));
@@ -44,11 +39,7 @@ int main(__attribute__((unused)) int argc, char *argv[]) {
         init_memory(pid);
         init_trampoline();
 
-        // Start PTrace
-        if (use_ptrace) {
-            init_ptrace_host(pid);
-        } else {
-            init_pipe_host(pid);
-        }
+        // Start Pipes
+        init_pipe_host(pid);
     }
 }

native/src/memory.cpp

@@ -5,38 +5,19 @@
 #include "memory.h"
 #include "log.h"
 
-// Store PID
+// Read/Write Memory
 static pid_t guest_pid;
 void init_memory(pid_t pid) {
     guest_pid = pid;
 }
-
-// Read Memory
-void memory_reader(uint32_t guest_addr, void *data, uint32_t size) {
-    if (size == 0) {
-        return;
-    }
+void memory_writer(uint32_t guest_addr, const void *data, uint32_t size) {
     iovec local[1];
-    local[0].iov_base = data;
+    local[0].iov_base = (void *) data;
     local[0].iov_len = size;
     iovec remote[1];
     remote[0].iov_base = (void *) (uint64_t) guest_addr;
     remote[0].iov_len = size;
-    ssize_t ret = process_vm_readv(guest_pid, local, 1, remote, 1, 0);
-    if (ret != size) {
-        ERR("Unable To Read Data: %s", strerror(errno));
-    }
-}
-
-// Write Memory
-void memory_writer(uint32_t guest_addr, void *data, uint32_t size) {
-    iovec local[1];
-    local[0].iov_base = data;
-    local[0].iov_len = size;
-    iovec remote[1];
-    remote[0].iov_base = (void *) (uint64_t) guest_addr;
-    remote[0].iov_len = size;
-    ssize_t ret = process_vm_writev(guest_pid, local, 1, remote, 1, 0);
+    const ssize_t ret = process_vm_writev(guest_pid, local, 1, remote, 1, 0);
     if (ret != size) {
         ERR("Unable To Write Data: %s", strerror(errno));
     }

native/src/memory.h

@@ -3,6 +3,6 @@
 #include <cstdint>
 #include <sys/types.h>
 
-void memory_reader(uint32_t guest_addr, void *data, uint32_t size);
-void memory_writer(uint32_t guest_addr, void *data, uint32_t size);
+// Read External Memory
+void memory_writer(uint32_t guest_addr, const void *data, uint32_t size);
 void init_memory(pid_t guest_pid);

native/src/pipe.cpp

@@ -8,9 +8,9 @@
 
 #include "pipe.h"
 
-#include "../log.h"
-#include "../trampoline.h"
-#include "../memory.h"
+#include "log.h"
+#include "trampoline.h"
+#include "memory.h"
 
 // Setup Pipes
 #define PIPE_READ 0
@@ -47,15 +47,26 @@ void init_pipe_host(pid_t guest_pid) {
     trampoline_pipe_arguments cmd = {};
     while (read(arguments_pipe[PIPE_READ], &cmd, sizeof(trampoline_pipe_arguments)) > 0) {
         static unsigned char args[MAX_TRAMPOLINE_ARGS_SIZE];
-        memory_reader(cmd.args_addr, args, cmd.length);
+        size_t position = 0;
+        while (position < cmd.length) {
+            ssize_t ret = read(arguments_pipe[PIPE_READ], args + position, cmd.length - position);
+            if (ret == -1) {
+                ERR("Unable To Read Trampoline Arguments");
+            } else {
+                position += ret;
+            }
+        }
         uint32_t ret = trampoline(cmd.id, args);
-        write(return_value_pipe[PIPE_WRITE], &ret, sizeof(uint32_t));
+        if (!cmd.allow_early_return) {
+            write(return_value_pipe[PIPE_WRITE], &ret, sizeof(uint32_t));
+        }
     }
     // Reap Child
     int status;
     if (waitpid(guest_pid, &status, 0) == -1) {
         ERR("Unable To Reap Child: %s", strerror(errno));
     }
+    // Exit
     if (WIFEXITED(status)) {
         exit(WEXITSTATUS(status));
     } else {

native/src/ptrace/init.cpp

@@ -1,46 +0,0 @@
-#include <linux/seccomp.h>
-#include <linux/filter.h>
-#include <sys/prctl.h>
-#include <cstddef>
-#include <cerrno>
-#include <cstring>
-
-#include <trampoline/types.h>
-
-#include "ptrace.h"
-#include "../log.h"
-
-// Init
-void init_ptrace_host(pid_t guest_pid) {
-    // Wait For PTrace
-    safe_wait(guest_pid, nullptr);
-    // Configure PTrace
-    safe_ptrace(PTRACE_SETOPTIONS, guest_pid, nullptr, (void *) (PTRACE_O_EXITKILL | PTRACE_O_TRACESECCOMP));
-    // Start Loop
-    loop_ptrace(guest_pid);
-}
-void init_ptrace_guest() {
-    // seccomp Filter
-    sock_filter filter[] = {
-        // Load Syscall Number To Accumulator
-        BPF_STMT(BPF_LD + BPF_W + BPF_ABS, offsetof(seccomp_data, nr)),
-        // If Syscall Does Not Match The Trampoline, Then Skip The Next Instruction
-        BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, TRAMPOLINE_SYSCALL, 0, 1),
-        // Trigger PTrace And End Filter
-        BPF_STMT(BPF_RET + BPF_K, SECCOMP_RET_TRACE),
-        // Allow Syscall And End Filter
-        BPF_STMT(BPF_RET + BPF_K, SECCOMP_RET_ALLOW)
-    };
-    sock_fprog prog = {
-        .len = (unsigned short) (sizeof(filter) / sizeof(filter[0])),
-        .filter = filter
-    };
-    // Setup PTrace
-    safe_ptrace(PTRACE_TRACEME, 0, nullptr, nullptr);
-    if (prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) == -1) {
-        ERR("Unable To Prepare Process For Seccomp: %s", strerror(errno));
-    }
-    if (prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog) == -1) {
-        ERR("Unable To Set Seccomp Filter: %s", strerror(errno));
-    }
-}

native/src/ptrace/loop.cpp

@@ -1,117 +0,0 @@
-#include <sys/wait.h>
-#include <sys/uio.h>
-#include <cstring>
-#include <cerrno>
-#include <elf.h>
-
-#ifndef __aarch64__
-#error "Unsupported Host Architecture"
-#endif
-#include <asm/ptrace.h>
-
-#include "ptrace.h"
-#include "../log.h"
-#include "../trampoline.h"
-#include "../memory.h"
-
-// Helper Functions
-void safe_ptrace(__ptrace_request request, pid_t pid, void *addr, void *data) {
-    if (ptrace(request, pid, addr, data) == -1) {
-        ERR("PTrace Error: %s", strerror(errno));
-    }
-}
-void safe_wait(pid_t guest_pid, int *status) {
-    int real_status;
-    if (waitpid(guest_pid, &real_status, 0) == -1) {
-        ERR("Unable To Wait For Guest");
-    }
-    if (WIFEXITED(real_status)) {
-        // Process Exited
-        exit(WEXITSTATUS(real_status));
-    }
-    if (status != nullptr) {
-        *status = real_status;
-    }
-}
-static void ptrace_wait_syscall(pid_t guest_pid) {
-    while (true) {
-        safe_ptrace(PTRACE_CONT, guest_pid, nullptr, nullptr);
-        int status;
-        safe_wait(guest_pid, &status);
-        if ((status >> 8) == (SIGTRAP | (PTRACE_EVENT_SECCOMP << 8))) {
-            return;
-        }
-    }
-}
-
-// Registers
-struct arm32_pt_regs {
-    uint32_t regs[18];
-};
-static bool check_syscall(pid_t guest_pid, arm32_pt_regs *out) {
-    // Read Registers
-    arm32_pt_regs regs = {};
-    iovec io = {
-        .iov_base = &regs,
-        .iov_len = sizeof(regs)
-    };
-    safe_ptrace(PTRACE_GETREGSET, guest_pid, (void *) NT_PRSTATUS, &io);
-    if (io.iov_len != sizeof(regs)) {
-        ERR("Guest Must Be 32-Bit");
-    }
-    // Check Syscall
-    if (regs.regs[7] != TRAMPOLINE_SYSCALL) {
-        // Not Trampoline
-        return false;
-    }
-    // Block Syscall
-    int new_syscall = -1;
-    iovec syscall_io = {
-        .iov_base = &new_syscall,
-        .iov_len = sizeof(int),
-    };
-    safe_ptrace(PTRACE_SETREGSET, guest_pid, (void *) NT_ARM_SYSTEM_CALL, &syscall_io);
-    // Export Registers
-    *out = regs;
-    // Return
-    return true;
-}
-static void get_arguments(arm32_pt_regs *regs, uint32_t *arg1, uint32_t *arg2, uint32_t *arg3) {
-    *arg1 = regs->regs[0];
-    *arg2 = regs->regs[1];
-    *arg3 = regs->regs[2];
-}
-static void set_syscall_return(pid_t guest_pid, arm32_pt_regs *regs) {
-    regs->regs[0] = 0;
-    iovec io = {
-        .iov_base = regs,
-        .iov_len = sizeof(arm32_pt_regs)
-    };
-    safe_ptrace(PTRACE_SETREGSET, guest_pid, (void *) NT_PRSTATUS, &io);
-}
-
-// Main Loop
-void loop_ptrace(pid_t guest_pid) {
-    while (true) {
-        // Wait For Syscall
-        ptrace_wait_syscall(guest_pid);
-
-        // Handle Syscall
-        arm32_pt_regs regs = {};
-        bool is_trampoline = check_syscall(guest_pid, &regs);
-        if (is_trampoline) {
-            // Get Arguments
-            uint32_t id;
-            uint32_t length;
-            uint32_t args_addr;
-            get_arguments(&regs, &id, &length, &args_addr);
-            static unsigned char args[MAX_TRAMPOLINE_ARGS_SIZE];
-            memory_reader(args_addr, args, length);
-            // Run Trampoline
-            uint32_t ret = trampoline(id, args);
-            memory_writer(args_addr, &ret, sizeof(uint32_t));
-            // Set Syscall Return
-            set_syscall_return(guest_pid, &regs);
-        }
-    }
-}

native/src/ptrace/ptrace.h

@@ -1,10 +0,0 @@
-#pragma once
-
-#include <sys/types.h>
-#include <sys/ptrace.h>
-
-void safe_ptrace(__ptrace_request request, pid_t pid, void *addr, void *data);
-void safe_wait(pid_t guest_pid, int *status);
-void init_ptrace_host(pid_t guest_pid);
-void init_ptrace_guest();
-void loop_ptrace(pid_t guest_pid);

native/src/signals.cpp

@@ -2,10 +2,6 @@
 
 #include "signals.h"
 
-#include <cstdio>
-#include <cstring>
-#include <cerrno>
-
 // Signal Handlers
 static pid_t guest_pid = -1;
 static void exit_handler(__attribute__((unused)) int signal_id) {

qemu/CMakeLists.txt

@@ -6,7 +6,7 @@ if(CMAKE_VERSION VERSION_GREATER_EQUAL 3.24.0)
 endif()
 
 # Archive
-if(NOT DEFINED TRAMPOLINE_QEMU_ARCHIVE)
+if(NOT DEFINED RUNTIME_QEMU_ARCHIVE)
     message(FATAL_ERROR "Missing QEMU Archive")
 endif()
 
@@ -24,7 +24,7 @@ if(DEFINED ENV{PKG_CONFIG_LIBDIR})
 endif()
 set(EXTRA_C_FLAGS "-s -I${CMAKE_CURRENT_SOURCE_DIR}/../include")
 ExternalProject_Add(qemu
-    URL "${TRAMPOLINE_QEMU_ARCHIVE}"
+    URL "${RUNTIME_QEMU_ARCHIVE}"
     # Configure Build
     CONFIGURE_COMMAND
         "${CMAKE_COMMAND}" "-E" "env"
@@ -36,7 +36,7 @@ ExternalProject_Add(qemu
         "--cross-prefix="
         "--cc=${CMAKE_C_COMPILER}"
         "--cxx=${CMAKE_CXX_COMPILER}"
-        "--extra-ldflags=-ldl -Wl,-rpath=$ORIGIN/../lib/native -Wl,--disable-new-dtags"
+        "--extra-ldflags=-ldl -Wl,-rpath=${RUNTIME_RPATH} -Wl,${RUNTIME_EXTRA_LINK_FLAG}"
         "--disable-debug-info"
         "--target-list=arm-linux-user"
         "--without-default-features"
@@ -54,9 +54,9 @@ ExternalProject_Add(qemu
 )
 
 # Install
-function(install_trampoline bin_dir legal_dir)
+function(install_runtime bin_dir legal_dir)
     ExternalProject_Get_property(qemu BINARY_DIR)
-    install(PROGRAMS "${BINARY_DIR}/qemu-arm" DESTINATION "${bin_dir}" RENAME "trampoline")
+    install(PROGRAMS "${BINARY_DIR}/qemu-arm" DESTINATION "${bin_dir}" RENAME "runtime")
     # License
     ExternalProject_Get_property(qemu SOURCE_DIR)
     install(FILES "${SOURCE_DIR}/COPYING" DESTINATION "${legal_dir}/qemu")