libpng.txt - a description on how to use and modify libpng libpng 1.0 beta 2 - version 0.87 For conditions of distribution and use, see copyright notice in png.h Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. January 15, 1996 Updated/rewritten per request in the libpng FAQ Copyright (c) 1995 Frank J. T. Wojcik December 18, 1995 I. Introduction This file describes how to use and modify the PNG reference library (known as libpng) for your own use. There are five sections to this file: introduction, structures, reading, writing, and modification and configuration notes for various special platforms. In addition to this file, example.c is a good starting point for using the library, as it is heavily commented and should include everything most people will need. Libpng was written as a companion to the PNG specification, as a way to reduce the amount of time and effort it takes to support the PNG file format in application programs. Most users will not have to modify the library significantly; advanced users may want to modify it more. The library was coded for both kinds of users. All attempts were made to make it as complete as possible, while keeping the code easy to understand. Currently, this library only supports C. Support for other languages is being considered. Libpng has been designed to handle multiple sessions at one time, to be easily modifiable, to be portable to the vast majority of machines (ANSI, K&R, 16 bit, 32 bit) available, and to be easy to use. The ultimate goal of libpng is to promote the acceptance of the PNG file format in whatever way possible. While there is still work to be done (see the todo.txt file), libpng should cover the majority of the needs of it's users. Libpng uses zlib for its compression and decompression of PNG files. The zlib compression utility is a general purpose utility that is useful for more than PNG files, and can be used without libpng. See the documentation delivered with zlib for more details. Libpng is thread safe provided the threads are using different instances of the structures. Each thread should have its own png_struct and png_info instances, and thus its own image. Libpng does not protect itself against two threads using the same instance of a structure. II. Structures There are two main structures that are important to libpng, png_struct and png_info. The first, png_struct, is an internal structure that will not, for the most part, be used by the general user except as the first variable passed to every png function call. The png_info structure is designed to provide information about the png file. All of its fields are intended to be examined or modified by the user. See png.h for a good description of the png_info fields. png.h is also an invaluable reference for programming with libpng. And while I'm on the topic, make sure you include the png header file: #include III. Reading Checking PNG files: Libpng provides a simple check to see if a file is a PNG file. To use it, pass in the first 1 to 8 bytes of the file, and it will return true or false (1 or 0) depending on whether the bytes could be part of a PNG file. Of course, the more bytes you pass in, the greater the accuracy of the prediction. If you pass in more then eight bytes, libpng will only look at the first eight bytes. fread(header, 1, number, fp); is_png = png_check_sig(header, number); Reading PNG files: We'll now walk you through the possible functions to call when reading in a PNG file, briefly explaining the syntax and purpose of each one. See example.c and png.h for more detail. While Progressive reading is covered in the next section, you will still need some of the functions discussed in this section to read a PNG file. The first thing you need to do while reading a PNG file, aside from the standard I/O initialization, is to allocate and initialize png_struct and png_info. As these are both large, you may not want to store these on the stack, unless you have stack space to spare. Of course, you will want to check if malloc returns NULL. png_structp png_ptr = malloc(sizeof (png_struct)); if (!png_ptr) return; png_infop info_ptr = malloc(sizeof (png_info)); if (!info_ptr) { free(png_ptr); return; } You may also want to do any i/o initialization here, before you get into libpng, so if it doesn't work, you don't have much to undo. FILE *fp = fopen(file_name, "rb"); if (!fp) { free(png_ptr); free(info_ptr); return; } If you are not using the standard i/o functions, you will need to replace them with custom functions. See the discussion under Customizing libpng. After you have these structures, you will need to set up the error handling. When libpng encounters an error, it expects to longjmp back to your routine. Therefore, you will need to call setjmp and pass the jmpbuf field of your png_struct. If you read the file from different routines, you will need to update the jmpbuf field every time you enter a new routine that will call a png_ function. See your documentation of setjmp/longjmp for your compiler for more information on setjmp/longjmp. See the discussion on libpng error handling in the Customizing Libpng section below for more information on the libpng error handling. If an error occurs, and libpng longjmp's back to your setjmp, you will want to call png_read_destroy() to free any memory. if (setjmp(png_ptr->jmpbuf)) { png_read_destroy(png_ptr, info_ptr, (png_info *)0); /* free pointers before returning, if necessary */ free(png_ptr); free(info_ptr); fclose(fp); return; } Next, you will need to call png_info_init() and png_read_init(). These functions make sure all the fields are initialized to useful values, and, in the case of png_read_init(), and allocate any memory needed for internal uses. You must call png_info_init() first, as png_read_init() could do a longjmp, and if the info is not initialized, the png_read_destroy() could try to png_free() random addresses, which would be bad. png_info_init(info_ptr); png_read_init(png_ptr); Now you need to set up the input code. The default for libpng is to use the C function fread(). If you use this, you will need to pass a valid FILE * in the function png_init_io(). Be sure that the file is opened in binary mode. If you wish to handle reading data in another way, see the discussion on png i/o handling in the Customizing Libpng section below. png_init_io(png_ptr, fp); You are now ready to read all the file information up to the actual image data. You do this with a call to png_read_info(). png_read_info(png_ptr, info_ptr); The png_info structure is now filled in with all the data necessary to read the file. Some of the more important parts of the png_info are: width - holds the width of the file height - holds the height of the file bit_depth - holds the bit depth of one of the image channels color_type - describes the channels and what they mean (see the PNG_COLOR_TYPE_ macros for more information) channels - number of channels of info for the color type pixel_depth - bits per pixel, the result of multiplying the bit_depth times the channels rowbytes - number of bytes needed to hold a row interlace_type - currently 0 for none, 1 for interlaced valid - this details which optional chunks were found in the file to see if a chunk was present, AND valid with the appropriate PNG_INFO_ define. These are also important, but their validity depends on whether a corresponding chunk exists. Use valid (see above) to ensure that what you're doing with these values makes sense. palette - the palette for the file num_palette - number of entries in the palette gamma - the gamma the file is written at sig_bit - the number of significant bits for the gray, red, green, and blue channels, whichever are appropriate for the given color type. sig_bit_number - number of channels trans_values - transparent pixel for non-paletted images trans - array of transparent entries for paletted images number_trans - number of transparent entries hist - histogram of palette text - text comments in the file. num_text - number of comments for more information, see the png_info definition in png.h and the PNG specification for chunk contents. Be careful with trusting rowbytes, as some of the transformations could increase the space needed to hold a row (expand, rgbx, xrgb, graph_to_rgb, etc.). See png_update_info(), below. A quick word about text and num_text. PNG stores comments in keyword/text pairs, one pair per chunk. While there are suggested keywords, there is no requirement to restrict the use to these strings. There is a requirement to have at least one character for a keyword. It is strongly suggested that keywords be sensible to humans (that's the point), so don't use abbreviations. See the png specification for more details. There is no requirement to have text after the keyword. Keywords are restricted to 80 characters without leading or trailing spaces, but spaces are allowed within the keyword It is possible to have the same keyword any number of times. The text field is an array of png_text structures, each holding pointer to a keyword and a pointer to a text string. Only the text string may be null. The keyword/text pairs are put into the array in the order that they are received. However, some or all of the text chunks may be after the image, so to make sure you have read all the text chunks, don't mess with these until after you read the stuff after the image. This will be mentioned again below in the discussion that goes with png_read_end(). After you've read the file information, you can set up the library to handle any special transformations of the image data. The various ways to transform the data will be described in the order that they occur. This is important, as some of these change the color type and bit depth of the data, and some others only work on certain color types and bit depths. Even though each transformation should check to see if it has data that it can do somthing with, you should make sure to only enable a transformation if it will be valid for the data. For example, don't swap red and blue on grayscale data. This transforms bit depths of less than 8 to 8 bits, changes paletted images to rgb, and adds an alpha channel if there is transparency information in a tRNS chunk. This is probably most useful on grayscale images with bit depths of 2 or 4 and tRNS chunks. if (info_ptr->color_type == PNG_COLOR_TYPE_PALETTE && info_ptr->bit_depth < 8) png_set_expand(png_ptr); if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY && info_ptr->bit_depth < 8) png_set_expand(png_ptr); if (info_ptr->valid & PNG_INFO_tRNS) png_set_expand(png_ptr); This handles alpha and transparency by replacing it with a background value. If there was a valid one in the file, you can use it if you want. However, you can replace it with your own if you want also. If there wasn't one in the file, you must supply a color. If libpng is doing gamma correction, you will need to tell libpng where the background came from so it can do the appropriate gamma correction. If you are modifying the color data with png_set_expand(), you must indicate whether the background needs to be expanded. See the function definition in png.h for more details. png_color_16 my_background; if (info_ptr->valid & PNG_INFO_bKGD) png_set_backgrond(png_ptr, &(info_ptr->background), PNG_BACKGROUND_GAMMA_FILE, 1, 1.0); else png_set_background(png_ptr, &my_background, PNG_BACKGROUND_GAMMA_SCREEN, 0, 1.0); This handles gamma transformations of the data. Pass both the file gamma and the desired screen gamma. If the file does not have a gamma value, you can pass one anyway if you wish. Note that file gammas are inverted from screen gammas. See the discussions on gamma in the PNG specification for more information. It is strongly recommended that viewers support gamma correction. if (info_ptr->valid & PNG_INFO_gAMA) png_set_gamma(png_ptr, screen_gamma, info_ptr->gamma); else png_set_gamma(png_ptr, screen_gamma, 0.45); PNG can have files with 16 bits per channel. If you only can handle 8 bits per channel, this will strip the pixels down to 8 bit. if (info_ptr->bit_depth == 16) png_set_strip_16(png_ptr); If you need to reduce an rgb file to a paletted file, or if a paletted file has more entries then will fit on your screen, png_set_dither() will do that. Note that this is a simple match dither, that merely finds the closest color available. This should work fairly well with optimized palettes, and fairly badly with linear color cubes. If you pass a palette that is larger then maximum_colors, the file will reduce the number of colors in the palette so it will fit into maximum_colors. If there is a histogram, it will use it to make intelligent choices when reducing the palette. If there is no histogram, it may not do as good a job. This function will be rewritten and/or replaced in libpng 0.9, which will have full two pass dithering with optimized palettes. if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) { if (info_ptr->valid & PNG_INFO_PLTE) png_set_dither(png_ptr, info_ptr->palette, info_ptr->num_palette, max_screen_colors, info_ptr->histogram); else { png_color std_color_cube[MAX_SCREEN_COLORS] = { ... colors ... }; png_set_dither(png_ptr, std_color_cube, MAX_SCREEN_COLORS, MAX_SCREEN_COLORS, NULL); } } PNG files describe monocrome as black is zero and white is one. The following code will reverse this (make black be one and white be zero): if (info_ptr->bit_depth == 1 && info_ptr->color_type == PNG_COLOR_GRAY) png_set_invert(png_ptr); PNG files have possible bit depths of 1, 2, 4, 8, and 16. However, they also provide a way to describe the true bit depth of the image. It is then required that values be "scaled" or "shifted" up to the bit depth used in the file. See the PNG specification for details. This code reduces the pixels back down to the true bit depth: if (info_ptr->valid & PNG_INFO_sBIT) png_set_shift(png_ptr, &(info_ptr->sig_bit)); PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as they can, resulting in, for example, 8 pixels per byte for 1 bit files. This code expands to 1 pixel per byte without changing the values of the pixels: if (info_ptr->bit_depth < 8) png_set_packing(png_ptr); PNG files store 3 color pixels in red, green, blue order. This code changes the storage of the pixels to blue, green, red: if (info_ptr->color_type == PNG_COLOR_TYPE_RGB || info_ptr->color_type == PNG_COLOR_TYPE_RGB_ALPHA) png_set_bgr(png_ptr); For some uses, you may want a gray-scale image to be represented as rgb. This code will do that conversion: if (info_ptr->color_type == PNG_COLOR_TYPE_GRAY || info_ptr->color_type == PNG_COLOR_TYPE_GRAY_ALPHA) png_set_gray_to_rgb(png_ptr); PNG files store 16 bit pixels in network byte order (big-endian, ie. most significant bits first). This code chages the storage to the other way (little-endian, ie. least significant bits first, eg. the way PCs store them): if (info_ptr->bit_depth == 16) png_set_swap(png_ptr); PNG files store rgb pixels packed into 3 bytes. This code packs them into 4 bytes: if (info_ptr->bit_depth == 8 && info_ptr->color_type == PNG_COLOR_TYPE_RGB) png_set_filler(png_ptr, filler_byte, PNG_FILLER_BEFORE); where filler_byte is the number to fill with, and the location is either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether you want the filler before the rgb or after. The last thing to handle is interlacing; this is covered in detail below, but you must call the function here. if (info_ptr->interlace_type) number_passes = png_set_interlace_handling(png_ptr); After setting the transformations, you can update your palette by calling png_start_read_image(). This function is provided for those who need an updated palette before they read the image data. If you don't call this function, the library will automatically call it before it reads the first row. png_start_read_image(png_ptr); libpng can update your png_info structure to reflect any transformations you've requested with this call. This is most useful to update the info structures rowbytes field, so you can use it to allocate your image memory. This function calls png_start_read_image(), so you don't have to call both of them. png_read_update_info(png_ptr, info_ptr); After you call png_read_update_info(), you can allocate any memory you need to hold the image. As the actual allocation varies among applications, no example will be given. If you are allocating one large chunk, you may find it useful to build an array of pointers to each row, as it will be needed for some of the functions below. After you've allocated memory, you can read the image data. The simplest way to do this is in one function call. If you are allocating enough memory to hold the whole image, you can just call png_read_image() and libpng will read in all the image data and put it in the memory area supplied. You will need to pass in an array of pointers to each row. This function automatically handles interlacing, so you don't need to call png_set_interlace_handling() or call this function multiple times, or any of that other stuff necessary with png_read_rows(). png_read_image(png_ptr, row_pointers); where row_pointers is: png_bytep row_pointers[height]; You can point to void or char or whatever you use for pixels. If you don't want to read the whole image in at once, you can use png_read_rows() instead. If there is no interlacing (check info_ptr->interlace_type), this is simple: png_read_rows(png_ptr, row_pointers, NULL, number_of_rows); row_pointers is the same as in the png_read_image() call. If you are just calling one row at a time, you can do this for row_pointers: png_bytep row_pointers = row; png_read_rows(png_ptr, &row_pointers, NULL, 1); If the file is interlaced (info_ptr->interlace_type != 0), things get a good deal harder. The only currently (as of 12/95) defined interlacing scheme for PNG files (info_ptr->interlace_type == 1) is a complicated interlace scheme, known as Adam7, that breaks down an image into seven smaller images of varying size. libpng will fill out those images or it will give them to you "as is". If you want to fill them out, there are two ways to do that. The one mentioned in the PNG specification is to expand each pixel to cover those pixels that have not been read yet. This results in a blocky image for the first pass, which gradually smoothes out as more pixels are read. The other method is the "sparkle" method, where pixels are draw only in their final locations, with the rest of the image remaining whatever colors they were initialized to before the start of the read. The first method usually looks better, but tends to be slower, as there are more pixels to put in the rows. If you don't want libpng to handle the interlacing details, just call png_read_rows() the correct number of times to read in all seven images. See the PNG specification for more details on the interlacing scheme. If you want libpng to expand the images, call this above: if (info_ptr->interlace_type) number_passes = png_set_interlace_handling(png_ptr); This will return the number of passes needed. Currently, this is seven, but may change if another interlace type is added. This function can be called even if the file is not interlaced, when it will return one. If you are not going to display the image after each pass, but are going to wait until the entire image is read in, use the sparkle effect. This effect is faster and the end result of either method is exactly the same. If you are planning on displaying the image after each pass, the rectangle effect is generally considered the better looking one. If you only want the "sparkle" effect, just call png_read_rows() as normal, with the third parameter NULL. Make sure you make pass over the image number_passes times, and you don't change the data in the rows between calls. You can change the locations of the data, just not the data. Each pass only writes the pixels appropriate for that pass, and assumes the data from previous passes is still valid. png_read_rows(png_ptr, row_pointers, NULL, number_of_rows); If you only want the first effect (the rectangles), do the same as before except pass the row buffer in the third parameter, and leave the second parameter NULL. png_read_rows(png_ptr, NULL, row_pointers, number_of_rows); After you are finished reading the image, you can finish reading the file. If you are interested in comments or time, you should pass the png_info pointer from the png_read_info() call. If you are not interested, you can pass NULL. png_read_end(png_ptr, info_ptr); When you are done, you can free all memory used by libpng like this: png_read_destroy(png_ptr, info_ptr, (png_info *)0); After that, you can discard the structures, or reuse them another read or write. For a more compact example of reading a PNG image, see the file example.c. Reading PNG files progressively: The progressive reader is slightly different then the non-progressive reader. Instead of calling png_read_info(), png_read_rows(), and png_read_end(), you make one call to png_process_data(), which calls callbacks when it has the info, a row, or the end of the image. You set up these callbacks with png_set_progressive_read_fn(). You don't have to worry about the input/output functions of libpng, as you are giving the library the data directly in png_process_data(). I will assume that you have read the second on reading PNG files above, so I will only highlight the differences (although I will show all of the code). png_structp png_ptr; png_infop info_ptr; int initialize_png_reader() { png_ptr = malloc(sizeof (png_struct)); if (!png_ptr) return -1; info_ptr = malloc(sizeof (png_info)); if (!info_ptr) { free(png_ptr); return -1; } if (setjmp(png_ptr->jmpbuf)) { png_read_destroy(png_ptr, info_ptr, (png_info *)0); /* free pointers before returning, if necessary */ free(png_ptr); free(info_ptr); return -1; } png_info_init(info_ptr); png_read_init(png_ptr); /* this one's new. You will need to provide all three function callbacks, even if you aren't using them all. You can use any void pointer as the user_ptr, and retrieve the pointer from inside the callbacks using the function png_get_progressive_ptr(png_ptr); */ png_set_progressive_read_fn(png_ptr, user_ptr, info_callback, row_callback, end_callback); return 0; } int process_data(png_bytep buffer, png_uint_32 length) { if (setjmp(png_ptr->jmpbuf)) { png_read_destroy(png_ptr, info_ptr, (png_info *)0); free(png_ptr); free(info_ptr); return -1; } /* this one's new also. Simply give it a chunk of data from the file stream (in order, of course). On Segmented machines, don't give it any more then 64K. The library seems to run fine with sizes of 4K, although you can give it much less if necessary (I assume you can give it chunks of 1 byte, but I haven't tried less then 256 bytes yet). When this function returns, you may want to display any rows that were generated in the row callback. */ png_process_data(png_ptr, info_ptr, buffer, length); return 0; } info_callback(png_structp png_ptr, png_infop info) { do any setup here, including setting any of the transformations mentioned in the Reading PNG files section. For now, you _must_ call either png_start_read_image() or png_read_update_info() after all the transformations are set (even if you don't set any). You may start getting rows before png_process_data() returns, so this is your last chance to prepare for that. } row_callback(png_structp png_ptr, png_bytep new_row, png_uint_32 row_num, int pass) { this function is called for every row in the image. If the image is interlacing, and you turned on the interlace handler, this function will be called for every row in every pass. Some of these rows will not be changed from the previous pass. When the row is not changed, the new_row variable will be NULL. The rows and passes are called in order, so you don't really need the row_num and pass, but I'm supplying them because it may make your life easier. For the non-NULL rows of interlaced images, you must call png_progressive_combine_row() passing in the row and the old row. You can call this function for NULL rows (it will just return) and for non-interlaced images (it just does the memcpy for you) if it will make the code easier. Thus, you can just do this for all cases: png_progressive_combine_row(png_ptr, old_row, new_row); where old_row is what was displayed for previous rows. Note that the first pass (pass == 0 really) will completely cover the old row, so the rows do not have to be initialized. After the first pass (and only for interlaced images), you will have to pass the current row, and the function will combine the old row and the new row. } end_callback(png_structp png_ptr, png_infop info) { this function is called when the whole image has been read, including any chunks after the image (up to and including the IEND). You will usually have the same info chunk as you had in the header, although some data may have been added to the comments and time fields. Most people won't do much here, perhaps setting a flag that marks the image as finished. } IV. Writing Much of this is very similar to reading. However, everything of importance is repeated here, so you don't have to constantly look back up in the reading section to understand writing. The first thing you need to do while writing a PNG file is to allocate and initialize png_struct and png_info. As these are both large, you may not want to store these on the stack, unless you have stack space to spare. png_structp png_ptr = malloc(sizeof (png_struct)); if (!png_ptr) return; png_infop info_ptr = malloc(sizeof (png_info)); if (!info_ptr) { free(png_ptr); return; } You may also want to do any i/o initialization here, before you get into libpng, so if it doesn't work, you don't have much to undo. FILE *fp = fopen(file_name, "wb"); if (!fp) { free(png_ptr); free(info_ptr); return; } After you have these structures, you will need to set up the error handling. When libpng encounters an error, it expects to longjmp back to your routine. Therefore, you will need to call setjmp and pass the jmpbuf field of your png_struct. If you write the file from different routines, you will need to update the jmpbuf field every time you enter a new routine that will call a png_ function. See your documentation of setjmp/longjmp for your compiler for more information on setjmp/longjmp. See the discussion on libpng error handling in the Customizing Libpng section below for more information on the libpng error handling. if (setjmp(png_ptr->jmpbuf)) { png_write_destroy(png_ptr); /* free pointers before returning. Make sure you clean up anything else you've done. */ free(png_ptr); free(info_ptr); fclose(fp); return; } Next, you will need to call png_info_init() and png_write_init(). These functions make sure all the fields are initialized to useful values, and, in the case of png_write_init(), allocate any memory needed for internal uses. Do png_info_init() first, so if png_write_init() longjmps, you know info_ptr is valid, so you don't free random memory pointers, which would be bad. png_info_init(info_ptr); png_write_init(png_ptr); Now you need to set up the input code. The default for libpng is to use the C function fwrite(). If you use this, you will need to pass a valid FILE * in the function png_init_io(). Be sure that the file is opened in binary mode. If you wish to handle writing data in another way, see the discussion on png i/o handling in the Customizing Libpng section below. png_init_io(png_ptr, fp); You now have the option of modifying how the compression library will run. The following functions are mainly for testing, but may be useful in certain special cases, like if you need to write png files extremely fast and are willing to give up some compression, or if you want to get the maximum possible compression at the expense of slower writing. If you have no special needs in this area, let the library do what it wants, as it has been carefully tuned to deliver the best speed/compression ratio. See the compression library for more details. /* turn on or off filtering (1 or 0) */ png_set_filtering(png_ptr, 1); /* compression level (0 - none, 6 - default, 9 - maximum) */ png_set_compression_level(png_ptr, Z_DEFAULT_COMPRESSION); png_set_compression_mem_level(png_ptr, 8); png_set_compression_strategy(png_ptr, Z_DEFAULT_STRATEGY); png_set_compression_window_bits(png_ptr, 15); png_set_compression_method(png_ptr, 8); You now need to fill in the png_info structure with all the data you wish to write before the actual image. Note that the only thing you are allowed to write after the image is the text chunks and the time chunk. See png_write_end() for more information on that. If you wish to write them before the image, fill them in now. If you want to wait until after the data, don't fill them until png_write_end(). For all the fields in png_info, see png.h. For explanations of what the fields contain, see the PNG specification. Some of the more important parts of the png_info are: width - holds the width of the file height - holds the height of the file bit_depth - holds the bit depth of one of the image channels color_type - describes the channels and what they mean see the PNG_COLOR_TYPE_ defines for more information interlace_type - currently 0 for none, 1 for interlaced valid - this describes which optional chunks to write to the file. Note that if you are writing a PNG_COLOR_TYPE_PALETTE file, the PLTE chunk is not optional, but must still be marked for writing. To mark chunks for writing, OR valid with the appropriate PNG_INFO_ define. palette - the palette for the file num_palette - number of entries in the palette gamma - the gamma the file is written at sig_bit - the number of significant bits for the gray, red, green, and blue channels, whichever are appropriate for the given color type. sig_bit_number - number of channels trans_values - transparent pixel for non-paletted images trans - array of transparent entries for paletted images number_trans - number of transparent entries hist - histogram of palette text - text comments in the file. num_text - number of comments A quick word about text and num_text. text is an array of png_text structures. num_text is the number of valid structures in the array. If you want, you can use max_text to hold the size of the array, but libpng ignores it for writing (it does use it for reading). Each png_text structure holds a keyword-text value, and a compression type. The compression types have the same valid numbers as the compression types of the image data. Currently, the only valid number is zero. However, you can store text either compressed or uncompressed, unlike images which always have to be compressed. So if you don't want the text compressed, set the compression type to -1. Until text gets arount 1000 bytes, it is not worth compressing it. The keyword-text pairs work like this. Keywords should be short simple descriptions of what the comment is about. Some typical keywords are found in the PNG specification, as is some recomendations on keywords. You can repeat keywords in a file. You can even write some text before the image and some after. For example, you may want to put a description of the image before the image, but leave the disclaimer until after, so viewers working over modem connections don't have to wait for the disclaimer to go over the modem before they start seeing the image. Finally, keywords should be full words, not abbreviations. Keywords can not contain NUL characters, and should not contain control characters. Text in general should not contain control characters. The keyword must be present, but you can leave off the text string on non-compressed pairs. Compressed pairs must have a text string, as only the text string is compressed anyway, so the compression would be meaningless. PNG supports modification time via the png_time structure. Two conversion routines are proved, png_convert_from_time_t() for time_t and png_convert_from_struct_tm() for struct tm. The time_t routine uses gmtime(). You don't have to use either of these, but if you wish to fill in the png_time structure directly, you should provide the time in universal time (GMT) if possible instead of your local time. Note that the year number is the full year (ie 1996, rather than 96). It is possible to have libpng flush any pending output, either manually, or automatically after a certain number of lines have been written. To flush the output stream a single time call: png_write_flush(png_ptr); and to have libpng flush the output stream periodically after a certain number of scanlines have been written, call: png_set_flush(png_ptr, nrows); Note that the distance between rows is from the last time png_write_flush was called, or the first row of the image if it has never been called. So if you write 50 lines, and then png_set_flush 25, it will flush the output on the next scanline, and on line 75, unless png_write_flush is called earlier. If nrows is too small (less than about 10 lines) the image compression may decrease dramatically (although this may be acceptable for real-time applications). Infrequent flushing will only degrade the compression performance by a few percent over images that do not use flushing. You are now ready to write all the file information up to the actual image data. You do this with a call to png_write_info(). png_write_info(png_ptr, info_ptr); After you've read the file information, you can set up the library to handle any special transformations of the image data. The various ways to transform the data will be described in the order that they occur. This is important, as some of these change the color type and bit depth of the data, and some others only work on certain color types and bit depths. Even though each transformation should check to see if it has data that it can do somthing with, you should make sure to only enable a transformation if it will be valid for the data. For example, don't swap red and blue on grayscale data. PNG files store rgb pixels packed into 3 bytes. This code tells the library to use 4 bytes per pixel png_set_filler(png_ptr, 0, PNG_FILLER_BEFORE); where the 0 is not used for writing, and the location is either PNG_FILLER_BEFORE or PNG_FILLER_AFTER, depending upon whether you want the filler before the rgb or after. PNG files pack pixels of bit depths 1, 2, and 4 into bytes as small as they can, resulting in, for example, 8 pixels per byte for 1 bit files. If the data is supplied at 1 pixel per byte, use this code, which will correctly pack the values: png_set_packing(png_ptr); PNG files reduce possible bit depths to 1, 2, 4, 8, and 16. If your data is of another bit depth, but is packed into the bytes correctly, this will scale the values to appear to be the correct bit depth. Make sure you write a sBIT chunk when you do this, so others, if they want, can reduce the values down to their true depth. /* do this before png_write_info() */ info_ptr->valid |= PNG_INFO_sBIT; /* note that you can cheat and set all the values of sig_bit to true_bit_depth if you want */ if (info_ptr->color_type & PNG_COLOR_MASK_COLOR) { info_ptr->sig_bit.red = true_bit_depth; info_ptr->sig_bit.green = true_bit_depth; info_ptr->sig_bit.blue = true_bit_depth; } else { info_ptr->sig_bit.gray = true_bit_depth; } if (info_ptr->color_type & PNG_COLOR_MASK_ALPHA) { info_ptr->sig_bit.alpha = true_bit_depth; } png_set_shift(png_ptr, &(info_ptr->sig_bit)); PNG files store 16 bit pixels in network byte order (big-endian, ie. most significant bits first). This code would be used to supply them the other way (little-endian, ie. least significant bits first, eg. the way PCs store them): png_set_swap(png_ptr); PNG files store 3 color pixels in red, green, blue order. This code would be used to supply the pixels as blue, green, red: png_set_bgr(png_ptr); PNG files describe monochrome as black being zero and white being one. This code would be used to supply the pixels with this reversed (black being one and white being zero): png_set_invert(png_ptr); That's it for the transformations. Now you can write the image data. The simplest way to do this is in one function call. If have the whole image in memory, you can just call png_write_image() and libpng will write the image. You will need to pass in an array of pointers to each row. This function automatically handles interlacing, so you don't need to call png_set_interlace_handling() or call this function multiple times, or any of that other stuff necessary with png_write_rows(). png_write_image(png_ptr, row_pointers); where row_pointers is: png_bytef *row_pointers[height]; You can point to void or char or whatever you use for pixels. If you can't want to write the whole image at once, you can use png_write_rows() instead. If the file is not interlaced, this is simple: png_write_rows(png_ptr, row_pointers, number_of_rows); row_pointers is the same as in the png_write_image() call. If you are just calling one row at a time, you can do this for row_pointers: png_bytep row_pointers = row; png_write_rows(png_ptr, &row_pointers, 1); When the file is interlaced, things can get a good deal more complicated. The only currently (as of 12/95) defined interlacing scheme for PNG files is a compilcated interlace scheme, known as Adam7, that breaks down an image into seven smaller images of varying size. libpng will build these images for you, or you can do them yourself. If you want to build them yourself, see the PNG specification for details of which pixels to write when. If you don't want libpng to handle the interlacing details, just call png_write_rows() the correct number of times to write all seven sub-images. If you want libpng to build the sub-images, call this before you start writing any rows: number_passes = png_set_interlace_handling(png_ptr); This will return the number of passes needed. Currently, this is seven, but may change if another interlace type is added. Then write the image number_passes times. png_write_rows(png_ptr, row_pointers, number_of_rows); As some of these rows are not used, and thus return immediately, you may want to read about interlacing in the PNG specification, and only update the rows that are actually used. After you are finished writing the image, you should finish writing the file. If you are interested in writing comments or time, you should pass the an appropriately filled png_info pointer. If you are not interested, you can pass NULL. Be careful that you don't write the same text or time chunks here as you did in png_write_info(). png_write_end(png_ptr, info_ptr); When you are done, you can free all memory used by libpng like this: png_write_destroy(png_ptr); Any data you allocated for png_info, you must free yourself. After that, you can discard the structures, or reuse them another read or write. For a more compact example of writing a PNG image, see the file example.c. V. Modifying/Customizing libpng: There are two issues here. The first is changing how libpng does standard things like memory allocation, input/output, and error handling. The second deals with more complicated things like adding new chunks, adding new transformations, and generally changing how libpng works. All of the memory allocation, input/output, and error handling in libpng goes through callbacks which are user setable. The default routines are in pngerror.c, pngmem.c, and pngio.c. To change these functions, call the approprate _fn function. Memory allocation is done through the functions png_large_malloc(), png_malloc(), png_realloc(), png_large_free(), and png_free(). These currently just call the standard C functions. The large functions must handle exactly 64K, but they don't have to handle more then that. If your pointers can't access more then 64K at a time, you will want to set MAXSEG_64K in zlib.h. Since it is unlikely that the method of handling memory allocation on a platform will change between applications, these functions must be modified in the library at compile time. Input/Output in libpng is done throught png_read() and png_write(), which currently just call fread() and fwrite(). The FILE * is stored in png_struct, and is initialized via png_init_io(). If you wish to change the method of I/O, the library supplies callbacks that you can set through the function png_set_read_fn() and png_set_write_fn() at run time. These functions also provide a void pointer that can be retrieved via the function png_get_io_ptr(). For example: png_set_read_fn(png_structp png_ptr, voidp io_ptr, png_rw_ptr read_data_fn) png_set_write_fn(png_structp png_ptr, voidp io_ptr, png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn); voidp io_ptr = png_get_io_ptr(png_ptr); The replacement I/O functions should have prototypes as follows: void user_read_data(png_structp png_ptr, png_bytep data, png_uint_32 length); void user_write_data(png_structp png_ptr, png_bytep data, png_uint_32 length); void user_flush_data(png_structp png_ptr); Supplying NULL for the read, write, or flush functions sets them back to using the default C stream functions. It is an error to read from a write stream, and vice versa. Error handling in libpng is done through png_error() and png_warning(). Errors handled through png_error() are fatal, meaning that png_error() should never return to it's caller. Currently, this is handled via setjmp() and longjmp(), but you could change this to do things like exit() if you should wish. On non-fatal errors, png_warning() is called to print a warning message, and then control returns to the calling code. By default png_error() and png_warning() print a message on stderr. If you wish to change the behavior of the error functions, you will need to set up your own message callbacks. You do this like the I/O callbacks above. png_set_message_fn(png_structp png_ptr, png_voidp msg_ptr, png_msg_ptr error_fn, png_msg_ptr warning_fn); png_voidp msg_ptr = png_get_msg_ptr(png_ptr); The replacement message functions should have parameters as follows: void user_error_fn(png_struct png_ptr, png_const_charp error_msg); void user_warning_fn(png_struct png_ptr, png_const_charp warning_msg); The motivation behind using setjmp() and longjmp() is the C++ throw and catch exception handling methods. This makes the code much easier to write, as there is no need to check every return code of every function call. However, there are some uncertainties about the status of local variables after a longjmp, so the user may want to be careful about doing anything after setjmp returns non zero besides returning itself. Consult your compiler documentation for more details. If you need to read or write custom chunks, you will need to get deeper into the libpng code. First, read the PNG specification, and have a first level of understanding of how it works. Pay particular attention to the sections that describe chunk names, and look at how other chunks were designed, so you can do things similar. Second, check out the sections of libpng that read and write chunks. Try to find a chunk that is similar to yours, and copy off of it. More details can be found in the comments inside the code. If you wish to write your own transformation for the data, look through the part of the code that does the transformations, and check out some of the more simple ones to get an idea of how they work. Try to find a similar transformation to the one you want to add, and copy off of it. More details can be found in the comments inside the code itself. Configuring for 16 bit platforms: You may need to change the png_large_malloc() and png_large_free() routines in pngmem.c, as these are requred to allocate 64K. Also, you will want to look into zconf.h to tell zlib (and thus libpng) that it cannot allocate more then 64K at a time. Even if you can, the memory won't be accessable. So limit zlib and libpng to 64K by defining MAXSEG_64K. Configuring for DOS: For DOS users which only have access to the lower 640K, you will have to limit zlib's memory usage via a png_set_compression_mem_level() call. See zlib.h or zconf.h in the zlib library for more information. Configuring for Medium Model: Libpng's support for medium model has been tested on most of the popular complers. Make sure MAXSEG_64K gets defined, USE_FAR_KEYWORD gets defined, and FAR gets defined to far in pngconf.h, and you should be all set. Everything in the library (except for zlib's structure) is expecting far data. You must use the typedefs with the p or pp on the end for pointers (or at least look at them and be careful). Make note that the row's of data are defined as png_bytepp which is a unsigned char far * far *. Configuring for gui/windowing platforms: You will need to change the error message display in png_error() and png_warning() to display a message instead of fprinting it to stderr. You may want to write a single function to do this and call it something like png_message(). On some compliers, you may have to change the memory allocators (png_malloc, etc.). Configuring for compiler xxx: All includes for libpng are in pngconf.h. If you need to add/change/delete an include, this is the place to do it. The includes that are not needed outside libpng are protected by the PNG_INTERNAL definition, which is only defined for those routines inside libpng itself. The files in libpng proper only include png.h, which includes pngconf.h. Configuring zlib: There are special functions to configure the compression. Perhaps the most useful one changes the compression level. The library normally uses the default compression level, but for maximum compression (9) or maximum speed (1), you may desire to change the level. You do this by calling: png_set_compression_mem_level(png_ptr, level); Another useful one is to reduce the memory level used by the library. The memory level defaults to 8, but it can be lowered if you are short on memory (running DOS, for example, where you only have 640K). png_set_compression_mem_level(png_ptr, level); If you want to control whether libpng uses filtering or not, you can call this function. I recommend not changing the default unless you are experimenting with compression ratios. png_set_filtering(png_ptr, use_filter); The other functions are for configuring zlib. They are not recommended for normal use and may result in writing an invalid png file. See zlib.h for more information on what these mean. png_set_compression_strategy(png_ptr, strategy); png_set_compression_window_bits(png_ptr, window_bits); png_set_compression_method(png_ptr, method); Except for png_set_filtering(), all of these are just controlling zlib, so see the zlib documentation (zlib.h and zconf.h) for more information. Removing unwanted object code: There are a bunch of #define's in pngconf.h that control what parts of libpng are compiled. All the defines end in _SUPPORT. If you are never going to use an ability, you can change the #define to #undef and save yourself code and data space. All the reading and writing specific code are in seperate files, so the linker should only grab the files it needs. However, if you want to make sure, or if you are building a stand alone library, all the reading files start with pngr and all the writing files start with pngw. The files that don't match either (like png.c, pngtrans.c, etc.) are used for both reading and writing, and always need to be included. The progressive reader is in pngpread.c