Imported from libpng-1.2.8.tar

This commit is contained in:
Glenn Randers-Pehrson 2004-12-02 18:14:51 -06:00
parent 584b96e859
commit 917648ecb9
78 changed files with 26174 additions and 207 deletions

View File

@ -1,55 +1,28 @@
Libpng 1.2.8rc5 - November 29, 2004 Libpng 1.2.8 - December 3, 2004
This is not intended to be a public release. It will be replaced This is a public release of libpng, intended for use in production codes.
within a few weeks by a public version or by another test version.
Changes since the last public release (1.2.7): Changes since the last public release (1.2.7):
Fixed bug in png_text_compress() that would fail to complete a large block. Fixed bug in png_text_compress() that would fail to complete a large block.
version 1.2.8beta1 [November 1, 2004]
Fixed bug, introduced in libpng-1.2.7, that overruns a buffer during Fixed bug, introduced in libpng-1.2.7, that overruns a buffer during
strip alpha operation in png_do_strip_filler(). strip alpha operation in png_do_strip_filler().
Added PNG_1_2_X definition in pngconf.h Added PNG_1_2_X definition in pngconf.h
#ifdef out png_info_init in png.c and png_read_init in pngread.c (as of 1.3.0) #ifdef out png_info_init in png.c and png_read_init in pngread.c (as of 1.3.0)
version 1.2.8beta2 [November 2, 2004]
Reduce color_type to a nonalpha type after strip alpha operation in Reduce color_type to a nonalpha type after strip alpha operation in
png_do_strip_filler(). png_do_strip_filler().
version 1.2.8beta3 [November 3, 2004]
Revised definitions of PNG_MAX_UINT_32, PNG_MAX_SIZE, and PNG_MAXSUM Revised definitions of PNG_MAX_UINT_32, PNG_MAX_SIZE, and PNG_MAXSUM
version 1.2.8beta4 [November 12, 2004]
Fixed (again) definition of PNG_LIBPNG_VER_DLLNUM in png.h (Cosmin). Fixed (again) definition of PNG_LIBPNG_VER_DLLNUM in png.h (Cosmin).
Added PNG_LIBPNG_BUILD_PRIVATE in png.h (Cosmin). Added PNG_LIBPNG_BUILD_PRIVATE in png.h (Cosmin).
Set png_ptr->zstream.data_type to Z_BINARY, to avoid unnecessary detection Set png_ptr->zstream.data_type to Z_BINARY, to avoid unnecessary detection
of data type in deflate (Cosmin). of data type in deflate (Cosmin).
Deprecated but continue to support SPECIALBUILD and PRIVATEBUILD in favor of Deprecated but continue to support SPECIALBUILD and PRIVATEBUILD in favor of
PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING. PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING.
version 1.2.8beta5 [November 20, 2004]
Use png_ptr->flags instead of png_ptr->transformations to pass
PNG_STRIP_ALPHA info to png_do_strip_filler(), to preserve ABI
compatibility.
Revised handling of SPECIALBUILD, PRIVATEBUILD,
PNG_LIBPNG_BUILD_SPECIAL_STRING and PNG_LIBPNG_BUILD_PRIVATE_STRING.
version 1.2.8rc1 [Novermber 24, 2004]
Inadvertently installed a supposedly faster test version of pngrutil.c
Moved handling of BUILD macros from pngconf.h to png.h
Added definition of PNG_LIBPNG_BASE_TYPE in png.h, inadvertently
omitted from beta5.
Revised scripts/pngw32.rc
Despammed mailing addresses by masking "@" with "at". Despammed mailing addresses by masking "@" with "at".
version 1.2.8rc2 [November 26, 2004]
Added two missing "\" in png.h
Change tests in pngread.c and pngpread.c to
if (png_ptr->transformations || (png_ptr->flags&PNG_FLAG_STRIP_ALPHA))
png_do_read_transformations(png_ptr);
version 1.2.8rc3 [November 28, 2004]
Reverted pngrutil.c to version libpng-1.2.8beta5.
Added scripts/makefile.elf with supporting code in pngconf.h for symbol Added scripts/makefile.elf with supporting code in pngconf.h for symbol
versioning (John Bowler). versioning (John Bowler).
version 1.2.8rc4 [November 29, 2004] Added projects/visualc71 (Simon-pierre).
Added projects/visualc7 (Simon-pierre).
version 1.2.8rc5 [November 29, 2004]
Fix new typo in scripts/pngw32.rc
Send comments/corrections/commendations to Send comments/corrections/commendations to
png-implement at ccrc.wustl.edu (subscription required; write to png-implement at ccrc.wustl.edu (subscription required; write to

View File

@ -1407,7 +1407,9 @@ version 1.2.8rc3 [November 28, 2004]
version 1.2.8rc4 [November 29, 2004] version 1.2.8rc4 [November 29, 2004]
Added projects/visualc7 (Simon-pierre). Added projects/visualc7 (Simon-pierre).
version 1.2.8rc5 [November 29, 2004] version 1.2.8rc5 [November 29, 2004]
Fix new typo in scripts/pngw32.rc Fixed new typo in scripts/pngw32.rc
version 1.2.8 [December 3, 2004]
Removed projects/visualc7, added projects/visualc71.
Send comments/corrections/commendations to Send comments/corrections/commendations to
png-implement at ccrc.wustl.edu (subscription required; write to png-implement at ccrc.wustl.edu (subscription required; write to

101
INSTALL
View File

@ -1,5 +1,5 @@
Installing libpng version 1.2.8rc5 - November 29, 2004 Installing libpng version 1.2.8 - %DATE%
Before installing libpng, you must first install zlib. zlib Before installing libpng, you must first install zlib. zlib
can usually be found wherever you got libpng. zlib can be can usually be found wherever you got libpng. zlib can be
@ -10,8 +10,8 @@ zlib.h and zconf.h include files that correspond to the
version of zlib that's installed. version of zlib that's installed.
You can rename the directories that you downloaded (they You can rename the directories that you downloaded (they
might be called "libpng-1.2.8rc5" or "lpng109" and "zlib-1.2.1" might be called "libpng-1.2.8" or "lpng109" and "zlib-1.1.3"
or "zlib121") so that you have directories called "zlib" and "libpng". or "zlib113") so that you have directories called "zlib" and "libpng".
Your directory structure should look like this: Your directory structure should look like this:
@ -23,13 +23,14 @@ Your directory structure should look like this:
*.c *.c
contrib contrib
gregbook gregbook
msvctest
pngminus pngminus
pngsuite pngsuite
visupng visupng
projects projects
beos beos
c5builder (Borland) borland
visualc6 (msvc) msvc
netware.txt netware.txt
wince.txt wince.txt
scripts scripts
@ -47,16 +48,13 @@ If the line endings in the files look funny, you may wish to get the other
distribution of libpng. It is available in both tar.gz (UNIX style line distribution of libpng. It is available in both tar.gz (UNIX style line
endings) and zip (DOS style line endings) formats. endings) and zip (DOS style line endings) formats.
If you are building libpng with MSVC, you can enter the libpng\msvc directory
and follow the instructions in msvc\README.txt.
If you are building libpng with MSVC, you can enter the You can build libpng for WindowsCE by entering the downloading and installing
libpng projects\visualc6 directory and follow the instructions in the libpng\wince directory as instructed in the projects\wince.txt file, and
projects\visualc6\README.txt.
You can build libpng for WindowsCE by downloading and installing
the projects\wince directory as instructed in the projects\wince.txt file, and
then following the instructions in the README* files. Similarly, you can then following the instructions in the README* files. Similarly, you can
build libpng for Netware or Beos as instructed in projects\netware.txt build libpng for Netware as instructed in projects\netware.txt.
or projects\beos.
Else enter the zlib directory and follow the instructions in zlib/README, Else enter the zlib directory and follow the instructions in zlib/README,
then come back here and choose the appropriate makefile.sys in the scripts then come back here and choose the appropriate makefile.sys in the scripts
@ -66,12 +64,8 @@ The files that are presently available in the scripts directory
include include
makefile.std => Generic UNIX makefile (cc, creates static libpng.a) makefile.std => Generic UNIX makefile (cc, creates static libpng.a)
makefile.elf => Linux/ELF makefile symbol versioning, makefile.linux => Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
gcc, creates libpng12.so.0.1.2.8rc5) makefile.gcmmx => Linux/ELF makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8,
makefile.linux => Linux/ELF makefile
(gcc, creates libpng12.so.0.1.2.8rc5)
makefile.gcmmx => Linux/ELF makefile
(gcc, creates libpng12.so.0.1.2.8rc5,
uses assembler code tuned for Intel MMX platform) uses assembler code tuned for Intel MMX platform)
makefile.gcc => Generic makefile (gcc, creates static libpng.a) makefile.gcc => Generic makefile (gcc, creates static libpng.a)
makefile.knr => Archaic UNIX Makefile that converts files with makefile.knr => Archaic UNIX Makefile that converts files with
@ -79,27 +73,23 @@ include
ftp://ftp.cs.wisc.edu/ghost) ftp://ftp.cs.wisc.edu/ghost)
makefile.aix => AIX/gcc makefile makefile.aix => AIX/gcc makefile
makefile.cygwin => Cygwin/gcc makefile makefile.cygwin => Cygwin/gcc makefile
makefile.darwin => Darwin makefile, can use on MacosX makefile.darwin => Darwin makefile
makefile.dec => DEC Alpha UNIX makefile makefile.dec => DEC Alpha UNIX makefile
makefile.freebsd => FreeBSD makefile makefile.hpgcc => FreeBSD makefile
makefile.hpgcc => HPUX makefile using gcc makefile.hpgcc => HPUX makefile using gcc
makefile.hpux => HPUX (10.20 and 11.00) makefile makefile.hpux => HPUX (10.20 and 11.00) makefile
makefile.hp64 => HPUX (10.20 and 11.00) makefile, 64-bit
makefile.ibmc => IBM C/C++ version 3.x for Win32 and OS/2 (static) makefile.ibmc => IBM C/C++ version 3.x for Win32 and OS/2 (static)
makefile.intel => Intel C/C++ version 4.0 and later makefile.intel => Intel C/C++ version 4.0 and later
libpng.icc => Project file for IBM VisualAge/C++ version 4.0 or later libpng.icc => Project file for IBM VisualAge/C++ version 4.0 or later
makefile.macosx => MACOS X Makefile
makefile.netbsd => NetBSD/cc makefile, uses PNGGCCRD, makes libpng.so. makefile.netbsd => NetBSD/cc makefile, uses PNGGCCRD, makes libpng.so.
makefile.ne12bsd => NetBSD/cc makefile, uses PNGGCCRD, makefile.ne%SONUM%bsd => NetBSD/cc makefile, uses PNGGCCRD, makes libpng%SONUM%.so
makes libpng12.so
makefile.openbsd => OpenBSD makefile makefile.openbsd => OpenBSD makefile
makefile.sgi => Silicon Graphics IRIX makefile (cc, creates static lib) makefile.sgi => Silicon Graphics IRIX makefile (cc, creates static lib)
makefile.sggcc => Silicon Graphics (gcc, makefile.sggcc => Silicon Graphics (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
creates libpng12.so.0.1.2.8rc5)
makefile.sunos => Sun makefile makefile.sunos => Sun makefile
makefile.solaris => Solaris 2.X makefile (gcc, makefile.solaris => Solaris 2.X makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
creates libpng12.so.0.1.2.8rc5) makefile.so9 => Solaris 9 makefile (gcc, creates libpng%SONAME%.so.%SONUM%.1.2.8)
makefile.so9 => Solaris 9 makefile (gcc,
creates libpng12.so.0.1.2.8rc5)
makefile.32sunu => Sun Ultra 32-bit makefile makefile.32sunu => Sun Ultra 32-bit makefile
makefile.64sunu => Sun Ultra 64-bit makefile makefile.64sunu => Sun Ultra 64-bit makefile
makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc
@ -112,6 +102,7 @@ include
makefile.beos => BEOS makefile for X86 makefile.beos => BEOS makefile for X86
makefile.bor => Borland makefile (uses bcc) makefile.bor => Borland makefile (uses bcc)
makefile.bc32 => 32-bit Borland C++ (all modules compiled in C mode) makefile.bc32 => 32-bit Borland C++ (all modules compiled in C mode)
makefile.bd32 => To make a png32bd.dll with Borland C++ 4.5
makefile.tc3 => Turbo C 3.0 makefile makefile.tc3 => Turbo C 3.0 makefile
makefile.dj2 => DJGPP 2 makefile makefile.dj2 => DJGPP 2 makefile
makefile.msc => Microsoft C makefile makefile.msc => Microsoft C makefile
@ -124,6 +115,7 @@ include
makefile.watcom => Watcom 10a+ Makefile, 32-bit flat memory model makefile.watcom => Watcom 10a+ Makefile, 32-bit flat memory model
makevms.com => VMS build script makevms.com => VMS build script
descrip.mms => VMS makefile for MMS or MMK descrip.mms => VMS makefile for MMS or MMK
pngdef.pas => Defines for a png32bd.dll with Borland C++ 4.5
SCOPTIONS.ppc => Used with smakefile.ppc SCOPTIONS.ppc => Used with smakefile.ppc
Copy the file (or files) that you need from the Copy the file (or files) that you need from the
@ -138,13 +130,13 @@ target directories to match your preferences.
Then read pngconf.h to see if you want to make any configuration Then read pngconf.h to see if you want to make any configuration
changes. changes.
Then just run "make" which will create the libpng library in Then just run "make test" which will create the libpng library in
this directory and "make test" which will run a quick test that reads this directory and run a quick test that reads the "pngtest.png"
the "pngtest.png" file and writes a "pngout.png" file that should be file and writes a "pngout.png" file that should be identical to it.
identical to it. Look for "9782 zero samples" in the output of the Look for "9782 zero samples" in the output of the test. For more
test. For more confidence, you can run another test by typing confidence, you can run another test by typing "pngtest pngnow.png"
"pngtest pngnow.png" and looking for "289 zero samples" in the output. and looking for "289 zero samples" in the output. Also, you can
Also, you can run "pngtest -m contrib/pngsuite/*.png" and compare run "pngtest -m *.png" in the "contrib/pngsuite" directory and compare
your output with the result shown in contrib/pngsuite/README. your output with the result shown in contrib/pngsuite/README.
Most of the makefiles will allow you to run "make install" to Most of the makefiles will allow you to run "make install" to
@ -153,17 +145,26 @@ do that, run "make install" in the zlib directory first if necessary).
Some also allow you to run "make test-installed" after you have Some also allow you to run "make test-installed" after you have
run "make install". run "make install".
If you encounter a compiler error message complaining about the
lines
__png.h__ already includes setjmp.h;
__dont__ include it again.;
This means you have compiled another module that includes setjmp.h,
which is hazardous because the two modules might not include exactly
the same setjmp.h. If you are sure that you know what you are doing
and that they are exactly the same, then you can comment out or
delete the two lines. Better yet, use the cexcept interface
instead, as demonstrated in contrib/visupng of the libpng distribution.
Further information can be found in the README and libpng.txt Further information can be found in the README and libpng.txt
files, in the individual makefiles, in png.h, and the manual pages files, in the individual makefiles, in png.h, in the README files in
libpng.3 and png.5. subdirectories of the LIB directory, and the manual pages libpng.3 and png.5.
Using the ./configure script -- 16 December 2002.
=================================================
The ./configure script should work compatibly with what scripts/makefile.*
did, however there are some options you need to add to configure explicitly,
which previously was done semi-automatically (if you didn't edit
scripts/makefile.* yourself, that is)
CFLAGS="-Wall -O3 -funroll-loops \
-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \
--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include
You can alternatively specify --includedir=/usr/include, /usr/local/include,
/usr/include/png12, or whatever.

View File

@ -1,5 +1,5 @@
Known bugs in libpng version 1.2.8rc5 Known bugs in libpng version 1.2.8
1. April 22, 2001: pnggccrd.c has been reported to crash on NetBSD when 1. April 22, 2001: pnggccrd.c has been reported to crash on NetBSD when
reading interlaced PNG files, when assembler code is enabled but running reading interlaced PNG files, when assembler code is enabled but running

View File

@ -8,7 +8,7 @@ COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following If you modify libpng you may insert additional notices immediately following
this sentence. this sentence.
libpng version 1.2.6, November 29, 2004, is libpng version 1.2.6, December 3, 2004, is
Copyright (c) 2004 Glenn Randers-Pehrson, and is Copyright (c) 2004 Glenn Randers-Pehrson, and is
distributed according to the same disclaimer and license as libpng-1.2.5 distributed according to the same disclaimer and license as libpng-1.2.5
with the following individual added to the list of Contributing Authors with the following individual added to the list of Contributing Authors
@ -106,4 +106,4 @@ certification mark of the Open Source Initiative.
Glenn Randers-Pehrson Glenn Randers-Pehrson
glennrp at users.sourceforge.net glennrp at users.sourceforge.net
November 29, 2004 December 3, 2004

66
Makefile.am Normal file
View File

@ -0,0 +1,66 @@
# test
check_PROGRAMS= pngtest
pngtest_SOURCES = pngtest.c
pngtest_LDADD = libpng.la
TESTS = test-pngtest.sh
TESTS_ENVIRONMENT= srcdir=$(srcdir)
dist_man_MANS= libpng.3 libpngpf.3 png.5
include_HEADERS= png.h pngconf.h
bin_SCRIPTS=libpng-config libpng12-config
#rules to build libpng
lib_LTLIBRARIES=libpng12.la libpng.la
libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c \
png.h pngconf.h
libpng_la_SOURCES = $(libpng12_la_SOURCES)
libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO)
libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO)
#distribute headers in /usr/include/libpng/*
pkginclude_HEADERS= png.h pngconf.h
#extra source distribution files.
EXTRA_DIST= ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \
pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \
${srcdir}/projects/cbuilder5/* ${srcdir}/projects/beos/* ${srcdir}/projects/visualc6/* \
${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \
${srcdir}/scripts/* \
${srcdir}/contrib/gregbook/* \
${srcdir}/contrib/pngminus/* \
${srcdir}/contrib/pngsuite/* \
${srcdir}/contrib/visupng/* \
$(TESTS) \
example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c
CLEANFILES= pngout.png libpng.pc libpng12.pc libpng-config libpng12-config
libpng.pc:
cat ${srcdir}/scripts/libpng.pc.in | \
sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc
libpng12.pc: libpng.pc
cp libpng.pc libpng12.pc
install-data-local: libpng.pc libpng12.pc
@INSTALL@ -d @PKGCONFIGDIR@
@INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@
@INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@
uninstall-local:
rm -f @PKGCONFIGDIR@/libpng.pc
rm -f @PKGCONFIGDIR@/libpng12.pc
libpng-config:
( cat ${srcdir}/scripts/libpng-config-head.in; \
echo prefix=\"$(prefix)\"; \
echo I_opts=\"-I$(includedir)\"; \
echo L_opts=\"-L$(libdir)\"; \
echo R_opts=\"-Wl,-rpath,$(libdir)\"; \
echo libs=\"-lpng12 -lz -lm\"; \
cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config
libpng12-config: libpng-config
cp libpng-config libpng12-config

898
Makefile.in Normal file
View File

@ -0,0 +1,898 @@
# Makefile.in generated by automake 1.7.2 from Makefile.am.
# @configure_input@
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = @host@
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBPNG12_VERSION_INFO = @LIBPNG12_VERSION_INFO@
LIBPNG3_VERSION_INFO = @LIBPNG3_VERSION_INFO@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKGCONFIGDIR = @PKGCONFIGDIR@
POW_LIB = @POW_LIB@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__quote = @am__quote@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
# test
check_PROGRAMS = pngtest
pngtest_SOURCES = pngtest.c
pngtest_LDADD = libpng.la
TESTS = test-pngtest.sh
TESTS_ENVIRONMENT = srcdir=$(srcdir)
dist_man_MANS = libpng.3 libpngpf.3 png.5
include_HEADERS = png.h pngconf.h
bin_SCRIPTS = libpng-config libpng12-config
#rules to build libpng
lib_LTLIBRARIES = libpng12.la libpng.la
libpng12_la_SOURCES = png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c \
png.h pngconf.h
libpng_la_SOURCES = $(libpng12_la_SOURCES)
libpng12_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG12_VERSION_INFO)
libpng_la_LDFLAGS = -export-dynamic -version-info $(LIBPNG3_VERSION_INFO)
#distribute headers in /usr/include/libpng/*
pkginclude_HEADERS = png.h pngconf.h
#extra source distribution files.
EXTRA_DIST = ANNOUNCE CHANGES INSTALL KNOWNBUG LICENSE README TODO Y2KINFO \
pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \
${srcdir}/projects/borland/* ${srcdir}/projects/beos/* ${srcdir}/projects/msvc/* \
${srcdir}/projects/wince.txt ${srcdir}/projects/netware.txt \
${srcdir}/scripts/* \
${srcdir}/contrib/gregbook/* \
${srcdir}/contrib/msvctest/* \
${srcdir}/contrib/pngminus/* \
${srcdir}/contrib/pngsuite/* \
${srcdir}/contrib/visupng/* \
$(TESTS) \
example.c libpng.txt pngasmrd.h pnggccrd.c pngvcrd.c
CLEANFILES = pngout.png libpng.pc libpng12.pc libpng-config libpng12-config
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
LTLIBRARIES = $(lib_LTLIBRARIES)
libpng_la_LIBADD =
am__objects_1 = png.lo pngset.lo pngget.lo pngrutil.lo pngtrans.lo \
pngwutil.lo pngread.lo pngrio.lo pngwio.lo pngwrite.lo \
pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo pngpread.lo
am_libpng_la_OBJECTS = $(am__objects_1)
libpng_la_OBJECTS = $(am_libpng_la_OBJECTS)
libpng12_la_LIBADD =
am_libpng12_la_OBJECTS = png.lo pngset.lo pngget.lo pngrutil.lo \
pngtrans.lo pngwutil.lo pngread.lo pngrio.lo pngwio.lo \
pngwrite.lo pngrtran.lo pngwtran.lo pngmem.lo pngerror.lo \
pngpread.lo
libpng12_la_OBJECTS = $(am_libpng12_la_OBJECTS)
check_PROGRAMS = pngtest$(EXEEXT)
am_pngtest_OBJECTS = pngtest.$(OBJEXT)
pngtest_OBJECTS = $(am_pngtest_OBJECTS)
pngtest_DEPENDENCIES = libpng.la
pngtest_LDFLAGS =
SCRIPTS = $(bin_SCRIPTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/png.Plo ./$(DEPDIR)/pngerror.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngget.Plo ./$(DEPDIR)/pngmem.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngpread.Plo ./$(DEPDIR)/pngread.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngrio.Plo ./$(DEPDIR)/pngrtran.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngrutil.Plo ./$(DEPDIR)/pngset.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngtest.Po ./$(DEPDIR)/pngtrans.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngwio.Plo ./$(DEPDIR)/pngwrite.Plo \
@AMDEP_TRUE@ ./$(DEPDIR)/pngwtran.Plo ./$(DEPDIR)/pngwutil.Plo
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) \
$(pngtest_SOURCES)
NROFF = nroff
MANS = $(dist_man_MANS)
HEADERS = $(include_HEADERS) $(pkginclude_HEADERS)
DIST_COMMON = README $(dist_man_MANS) $(include_HEADERS) \
$(pkginclude_HEADERS) INSTALL Makefile.am Makefile.in TODO \
aclocal.m4 config.guess config.h.in config.sub configure \
configure.ac depcomp install-sh ltmain.sh missing mkinstalldirs
SOURCES = $(libpng_la_SOURCES) $(libpng12_la_SOURCES) $(pngtest_SOURCES)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): configure.ac
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOHEADER)
touch $(srcdir)/config.h.in
distclean-hdr:
-rm -f config.h stamp-h1
libLTLIBRARIES_INSTALL = $(INSTALL)
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(libdir)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
$(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
else :; fi; \
done
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
p="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
$(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
done
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" = "$$p" && dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libpng.la: $(libpng_la_OBJECTS) $(libpng_la_DEPENDENCIES)
$(LINK) -rpath $(libdir) $(libpng_la_LDFLAGS) $(libpng_la_OBJECTS) $(libpng_la_LIBADD) $(LIBS)
libpng12.la: $(libpng12_la_OBJECTS) $(libpng12_la_DEPENDENCIES)
$(LINK) -rpath $(libdir) $(libpng12_la_LDFLAGS) $(libpng12_la_OBJECTS) $(libpng12_la_LIBADD) $(LIBS)
clean-checkPROGRAMS:
@list='$(check_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES)
@rm -f pngtest$(EXEEXT)
$(LINK) $(pngtest_LDFLAGS) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS)
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
$(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
else :; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
rm -f $(DESTDIR)$(bindir)/$$f; \
done
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@
distclean-depend:
-rm -rf ./$(DEPDIR)
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
@am__fastdepCC_TRUE@ fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
@am__fastdepCC_TRUE@ fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
.c.lo:
@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \
@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
@am__fastdepCC_TRUE@ fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
man3dir = $(mandir)/man3
install-man3: $(man3_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(man3dir)
@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.3*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
3*) ;; \
*) ext='3' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man3dir)/$$inst; \
done
uninstall-man3:
@$(NORMAL_UNINSTALL)
@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.3*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
3*) ;; \
*) ext='3' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \
rm -f $(DESTDIR)$(man3dir)/$$inst; \
done
man5dir = $(mandir)/man5
install-man5: $(man5_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(man5dir)
@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.5*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
5*) ;; \
*) ext='5' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \
done
uninstall-man5:
@$(NORMAL_UNINSTALL)
@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.5*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
5*) ;; \
*) ext='5' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \
rm -f $(DESTDIR)$(man5dir)/$$inst; \
done
includeHEADERS_INSTALL = $(INSTALL_HEADER)
install-includeHEADERS: $(include_HEADERS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(includedir)
@list='$(include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
$(includeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(includedir)/$$f; \
done
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
rm -f $(DESTDIR)$(includedir)/$$f; \
done
pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
install-pkgincludeHEADERS: $(pkginclude_HEADERS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
@list='$(pkginclude_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f"; \
$(pkgincludeHEADERS_INSTALL) $$d$$p $(DESTDIR)$(pkgincludedir)/$$f; \
done
uninstall-pkgincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(pkginclude_HEADERS)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " rm -f $(DESTDIR)$(pkgincludedir)/$$f"; \
rm -f $(DESTDIR)$(pkgincludedir)/$$f; \
done
ETAGS = etags
ETAGSFLAGS =
CTAGS = ctags
CTAGSFLAGS =
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-TESTS: $(TESTS)
@failed=0; all=0; xfail=0; xpass=0; skip=0; \
srcdir=$(srcdir); export srcdir; \
list='$(TESTS)'; \
if test -n "$$list"; then \
for tst in $$list; do \
if test -f ./$$tst; then dir=./; \
elif test -f $$tst; then dir=; \
else dir="$(srcdir)/"; fi; \
if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*" $$tst "*) \
xpass=`expr $$xpass + 1`; \
failed=`expr $$failed + 1`; \
echo "XPASS: $$tst"; \
;; \
*) \
echo "PASS: $$tst"; \
;; \
esac; \
elif test $$? -ne 77; then \
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
*" $$tst "*) \
xfail=`expr $$xfail + 1`; \
echo "XFAIL: $$tst"; \
;; \
*) \
failed=`expr $$failed + 1`; \
echo "FAIL: $$tst"; \
;; \
esac; \
else \
skip=`expr $$skip + 1`; \
echo "SKIP: $$tst"; \
fi; \
done; \
if test "$$failed" -eq 0; then \
if test "$$xfail" -eq 0; then \
banner="All $$all tests passed"; \
else \
banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
fi; \
else \
if test "$$xpass" -eq 0; then \
banner="$$failed of $$all tests failed"; \
else \
banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
fi; \
fi; \
dashes="$$banner"; \
skipped=""; \
if test "$$skip" -ne 0; then \
skipped="($$skip tests were not run)"; \
test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
dashes="$$skipped"; \
fi; \
report=""; \
if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
report="Please report to $(PACKAGE_BUGREPORT)"; \
test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
dashes="$$report"; \
fi; \
dashes=`echo "$$dashes" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
test -n "$$skipped" && echo "$$skipped"; \
test -n "$$report" && echo "$$report"; \
echo "$$dashes"; \
test "$$failed" -eq 0; \
else :; fi
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
top_distdir = .
distdir = $(PACKAGE)-$(VERSION)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkinstalldirs) $(distdir)/${srcdir}/contrib/gregbook $(distdir)/${srcdir}/contrib/msvctest $(distdir)/${srcdir}/contrib/pngminus $(distdir)/${srcdir}/contrib/pngsuite $(distdir)/${srcdir}/contrib/visupng $(distdir)/${srcdir}/projects $(distdir)/${srcdir}/projects/beos $(distdir)/${srcdir}/projects/borland $(distdir)/${srcdir}/projects/msvc $(distdir)/${srcdir}/scripts
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
$(am__remove_distdir)
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
&& rm -f $(distdir).tar.gz \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@echo "$(distdir).tar.gz is ready for distribution" | \
sed 'h;s/./=/g;p;x;p;x'
distuninstallcheck:
cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(HEADERS) config.h
installdirs:
$(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) $(DESTDIR)$(man3dir) $(DESTDIR)$(man5dir) $(DESTDIR)$(includedir) $(DESTDIR)$(pkgincludedir)
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-compile distclean-depend \
distclean-generic distclean-hdr distclean-libtool \
distclean-tags
dvi: dvi-am
dvi-am:
info: info-am
info-am:
install-data-am: install-data-local install-includeHEADERS install-man \
install-pkgincludeHEADERS
install-exec-am: install-binSCRIPTS install-libLTLIBRARIES
install-info: install-info-am
install-man: install-man3 install-man5
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-includeHEADERS \
uninstall-info-am uninstall-libLTLIBRARIES uninstall-local \
uninstall-man uninstall-pkgincludeHEADERS
uninstall-man: uninstall-man3 uninstall-man5
.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
clean-libtool ctags dist dist-all dist-gzip distcheck distclean \
distclean-compile distclean-depend distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am info info-am install \
install-am install-binSCRIPTS install-data install-data-am \
install-data-local install-exec install-exec-am \
install-includeHEADERS install-info install-info-am \
install-libLTLIBRARIES install-man install-man3 install-man5 \
install-pkgincludeHEADERS install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags uninstall uninstall-am uninstall-binSCRIPTS \
uninstall-includeHEADERS uninstall-info-am \
uninstall-libLTLIBRARIES uninstall-local uninstall-man \
uninstall-man3 uninstall-man5 uninstall-pkgincludeHEADERS
libpng.pc:
cat ${srcdir}/scripts/libpng.pc.in | \
sed -e 's,[@]PREFIX[@],$(prefix),' -e 's,[@]INCLUDEDIR[@],$(includedir),' > libpng.pc
libpng12.pc: libpng.pc
cp libpng.pc libpng12.pc
install-data-local: libpng.pc libpng12.pc
@INSTALL@ -d @PKGCONFIGDIR@
@INSTALL_DATA@ libpng.pc @PKGCONFIGDIR@
@INSTALL_DATA@ libpng12.pc @PKGCONFIGDIR@
uninstall-local:
rm -f @PKGCONFIGDIR@/libpng.pc
rm -f @PKGCONFIGDIR@/libpng12.pc
libpng-config:
( cat ${srcdir}/scripts/libpng-config-head.in; \
echo prefix=\"$(prefix)\"; \
echo I_opts=\"-I$(includedir)\"; \
echo L_opts=\"-L$(libdir)\"; \
echo R_opts=\"-Wl,-rpath,$(libdir)\"; \
echo libs=\"-lpng12 -lz -lm\"; \
cat ${srcdir}/scripts/libpng-config-body.in ) > libpng-config
libpng12-config: libpng-config
cp libpng-config libpng12-config
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

14
README
View File

@ -1,4 +1,4 @@
README for libpng version 1.2.8rc5 - November 29, 2004 (shared library 12.0) README for libpng version 1.2.8 - December 3, 2004 (shared library 12.0)
See the note about version numbers near the top of png.h See the note about version numbers near the top of png.h
See INSTALL for instructions on how to install libpng. See INSTALL for instructions on how to install libpng.
@ -189,11 +189,11 @@ Files in this distribution:
descrip.mms => VMS makefile for MMS or MMK descrip.mms => VMS makefile for MMS or MMK
makefile.std => Generic UNIX makefile (cc, creates static libpng.a) makefile.std => Generic UNIX makefile (cc, creates static libpng.a)
makefile.elf => Linux/ELF makefile symbol versioning, makefile.elf => Linux/ELF makefile symbol versioning,
gcc, creates libpng12.so.0.1.2.8rc5) gcc, creates libpng12.so.0.1.2.8)
makefile.linux => Linux/ELF makefile makefile.linux => Linux/ELF makefile
(gcc, creates libpng12.so.0.1.2.8rc5) (gcc, creates libpng12.so.0.1.2.8)
makefile.gcmmx => Linux/ELF makefile makefile.gcmmx => Linux/ELF makefile
(gcc, creates libpng12.so.0.1.2.8rc5, (gcc, creates libpng12.so.0.1.2.8,
uses assembler code tuned for Intel MMX platform) uses assembler code tuned for Intel MMX platform)
makefile.gcc => Generic makefile (gcc, creates static libpng.a) makefile.gcc => Generic makefile (gcc, creates static libpng.a)
makefile.knr => Archaic UNIX Makefile that converts files with makefile.knr => Archaic UNIX Makefile that converts files with
@ -215,12 +215,12 @@ Files in this distribution:
makefile.openbsd => OpenBSD makefile makefile.openbsd => OpenBSD makefile
makefile.sgi => Silicon Graphics IRIX (cc, creates static lib) makefile.sgi => Silicon Graphics IRIX (cc, creates static lib)
makefile.sggcc => Silicon Graphics makefile.sggcc => Silicon Graphics
(gcc, creates libpng12.so.0.1.2.8rc5) (gcc, creates libpng12.so.0.1.2.8)
makefile.sunos => Sun makefile makefile.sunos => Sun makefile
makefile.solaris => Solaris 2.X makefile makefile.solaris => Solaris 2.X makefile
(gcc, creates libpng12.so.0.1.2.8rc5) (gcc, creates libpng12.so.0.1.2.8)
makefile.so9 => Solaris 9 makefile makefile.so9 => Solaris 9 makefile
(gcc, creates libpng12.so.0.1.2.8rc5) (gcc, creates libpng12.so.0.1.2.8)
makefile.32sunu => Sun Ultra 32-bit makefile makefile.32sunu => Sun Ultra 32-bit makefile
makefile.64sunu => Sun Ultra 64-bit makefile makefile.64sunu => Sun Ultra 64-bit makefile
makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc

View File

@ -1,13 +1,13 @@
Y2K compliance in libpng: Y2K compliance in libpng:
========================= =========================
November 29, 2004 December 3, 2004
Since the PNG Development group is an ad-hoc body, we can't make Since the PNG Development group is an ad-hoc body, we can't make
an official declaration. an official declaration.
This is your unofficial assurance that libpng from version 0.71 and This is your unofficial assurance that libpng from version 0.71 and
upward through 1.2.8rc5 are Y2K compliant. It is my belief that earlier upward through 1.2.8 are Y2K compliant. It is my belief that earlier
versions were also Y2K compliant. versions were also Y2K compliant.
Libpng only has three year fields. One is a 2-byte unsigned integer Libpng only has three year fields. One is a 2-byte unsigned integer

4445
aclocal.m4 vendored Normal file

File diff suppressed because it is too large Load Diff

5
autogen.sh Executable file
View File

@ -0,0 +1,5 @@
#! /bin/sh
# a quick hack script to generate necessary files from
# auto* tools.
libtoolize -c -f && aclocal && autoheader && automake --foreign -a -c && autoconf

1400
config.guess vendored Executable file

File diff suppressed because it is too large Load Diff

92
config.h.in Normal file
View File

@ -0,0 +1,92 @@
/* config.h.in. Generated from configure.ac by autoheader. */
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* Define to 1 if you have the `m' library (-lm). */
#undef HAVE_LIBM
/* Define to 1 if you have the `z' library (-lz). */
#undef HAVE_LIBZ
/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
to 0 otherwise. */
#undef HAVE_MALLOC
/* Define to 1 if you have the <malloc.h> header file. */
#undef HAVE_MALLOC_H
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the `memset' function. */
#undef HAVE_MEMSET
/* Define to 1 if you have the `pow' function. */
#undef HAVE_POW
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the `strrchr' function. */
#undef HAVE_STRRCHR
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Define to 1 if your <sys/time.h> declares `struct tm'. */
#undef TM_IN_SYS_TIME
/* Version number of package */
#undef VERSION
/* Define to empty if `const' does not conform to ANSI C. */
#undef const
/* Define to rpl_malloc if the replacement function should be used. */
#undef malloc
/* Define to `unsigned' if <sys/types.h> does not define. */
#undef size_t

1469
config.sub vendored Executable file

File diff suppressed because it is too large Load Diff

10617
configure vendored

File diff suppressed because it is too large Load Diff

41
configure.ac Normal file
View File

@ -0,0 +1,41 @@
# Process this file with autoconf to produce a configure script.
m4_define(PNGPKG_VERSION,[1.2.8-automake])
AC_INIT([libpng], PNGPKG_VERSION, png-implement@ccrc.wustl.edu)
AM_INIT_AUTOMAKE([libpng], PNGPKG_VERSION)
AC_CONFIG_SRCDIR([pngget.c])
AM_CONFIG_HEADER([config.h])
# Checks for programs.
AC_PROG_CC
AC_PROG_MAKE_SET
AC_PROG_LIBTOOL
# Checks for header files.
AC_PATH_X
AC_HEADER_STDC
AC_CHECK_HEADERS([fcntl.h malloc.h stdlib.h string.h strings.h unistd.h])
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
AC_TYPE_SIZE_T
AC_STRUCT_TM
# Checks for library functions.
AC_FUNC_MALLOC
AC_FUNC_STRTOD
AC_CHECK_FUNCS([memset pow strrchr])
AC_CHECK_FUNC(sqrt, , AC_CHECK_LIB(m, sqrt,, [cannot find sqrt]))
AC_CHECK_LIB(z, zlibVersion,, AC_ERROR([ZLib not installed]))
AC_ARG_WITH(pkgconfigdir, AC_HELP_STRING([--with-pkgconfigdir],[Use the specified pkgconfig dir (default is prefix/lib/pkgconfig)]),[PKGCONFIGDIR=${withval}],[PKGCONFIGDIR='${prefix}/lib/pkgconfig'])
AC_MSG_CHECKING([pkgconfig directory])
AC_MSG_RESULT([$PKGCONFIGDIR])
AC_SUBST([PKGCONFIGDIR])
AC_SUBST(LIBPNG12_VERSION_INFO,0:0:0)
AC_SUBST(LIBPNG3_VERSION_INFO,3:0:0)
AC_CONFIG_FILES([Makefile])
AC_OUTPUT

423
depcomp Executable file
View File

@ -0,0 +1,423 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. This file always lives in the current directory.
# Also, the AIX compiler puts `$object:' at the start of each line;
# $object doesn't have directory information.
stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
outname="$stripped.o"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d"
tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
tmpdepfile1="$dir$base.o.d"
tmpdepfile2="$dir$base.d"
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a space and a tab in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'. We will use -o /dev/null later,
# however we can't do the remplacement now because
# `-o $object' might simply not be used
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
"$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# X makedepend
shift
cleared=no
for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
-*)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the proprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
"$@" || exit $?
IFS=" "
for arg
do
case "$arg" in
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0

276
install-sh Executable file
View File

@ -0,0 +1,276 @@
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/#inst.$$#
rmtmp=$dstdir/#rm.$$#
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}

View File

@ -1,6 +1,6 @@
.TH LIBPNG 3 "November 29, 2004" .TH LIBPNG 3 "December 3, 2004"
.SH NAME .SH NAME
libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8rc5 libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8
.SH SYNOPSIS .SH SYNOPSIS
\fI\fB \fI\fB
@ -781,7 +781,7 @@ Following is a copy of the libpng.txt file that accompanies libpng.
.SH LIBPNG.TXT .SH LIBPNG.TXT
libpng.txt - A description on how to use and modify libpng libpng.txt - A description on how to use and modify libpng
libpng version 1.2.8rc5 - November 29, 2004 libpng version 1.2.8 - December 3, 2004
Updated and distributed by Glenn Randers-Pehrson Updated and distributed by Glenn Randers-Pehrson
<glennrp at users.sourceforge.net> <glennrp at users.sourceforge.net>
Copyright (c) 1998-2004 Glenn Randers-Pehrson Copyright (c) 1998-2004 Glenn Randers-Pehrson
@ -3685,13 +3685,13 @@ application:
.SH IX. Y2K Compliance in libpng .SH IX. Y2K Compliance in libpng
November 29, 2004 December 3, 2004
Since the PNG Development group is an ad-hoc body, we can't make Since the PNG Development group is an ad-hoc body, we can't make
an official declaration. an official declaration.
This is your unofficial assurance that libpng from version 0.71 and This is your unofficial assurance that libpng from version 0.71 and
upward through 1.2.8rc5 are Y2K compliant. It is my belief that earlier upward through 1.2.8 are Y2K compliant. It is my belief that earlier
versions were also Y2K compliant. versions were also Y2K compliant.
Libpng only has three year fields. One is a 2-byte unsigned integer that Libpng only has three year fields. One is a 2-byte unsigned integer that
@ -3842,6 +3842,8 @@ the first widely used release:
1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5
1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5
1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5
1.0.18 10 10018 12.so.0.1.0.18
1.2.8 13 10208 12.so.0.1.2.8
Henceforth the source version will match the shared-library minor Henceforth the source version will match the shared-library minor
and patch numbers; the shared-library major version number will be and patch numbers; the shared-library major version number will be
@ -3897,7 +3899,7 @@ possible without all of you.
Thanks to Frank J. T. Wojcik for helping with the documentation. Thanks to Frank J. T. Wojcik for helping with the documentation.
Libpng version 1.2.8rc5 - November 29, 2004: Libpng version 1.2.8 - December 3, 2004:
Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc. Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc.
Currently maintained by Glenn Randers-Pehrson (glennrp at users.sourceforge.net). Currently maintained by Glenn Randers-Pehrson (glennrp at users.sourceforge.net).
@ -3915,7 +3917,7 @@ included in the libpng distribution, the latter shall prevail.)
If you modify libpng you may insert additional notices immediately following If you modify libpng you may insert additional notices immediately following
this sentence. this sentence.
libpng version 1.2.6, November 29, 2004, is libpng version 1.2.6, December 3, 2004, is
Copyright (c) 2004 Glenn Randers-Pehrson, and is Copyright (c) 2004 Glenn Randers-Pehrson, and is
distributed according to the same disclaimer and license as libpng-1.2.5 distributed according to the same disclaimer and license as libpng-1.2.5
with the following individual added to the list of Contributing Authors with the following individual added to the list of Contributing Authors
@ -4014,7 +4016,7 @@ certification mark of the Open Source Initiative.
Glenn Randers-Pehrson Glenn Randers-Pehrson
glennrp at users.sourceforge.net glennrp at users.sourceforge.net
November 29, 2004 December 3, 2004
.\" end of man page .\" end of man page

View File

@ -1,6 +1,6 @@
libpng.txt - A description on how to use and modify libpng libpng.txt - A description on how to use and modify libpng
libpng version 1.2.8rc5 - November 29, 2004 libpng version 1.2.8 - December 3, 2004
Updated and distributed by Glenn Randers-Pehrson Updated and distributed by Glenn Randers-Pehrson
<glennrp at users.sourceforge.net> <glennrp at users.sourceforge.net>
Copyright (c) 1998-2004 Glenn Randers-Pehrson Copyright (c) 1998-2004 Glenn Randers-Pehrson
@ -2904,13 +2904,13 @@ application:
IX. Y2K Compliance in libpng IX. Y2K Compliance in libpng
November 29, 2004 December 3, 2004
Since the PNG Development group is an ad-hoc body, we can't make Since the PNG Development group is an ad-hoc body, we can't make
an official declaration. an official declaration.
This is your unofficial assurance that libpng from version 0.71 and This is your unofficial assurance that libpng from version 0.71 and
upward through 1.2.8rc5 are Y2K compliant. It is my belief that earlier upward through 1.2.8 are Y2K compliant. It is my belief that earlier
versions were also Y2K compliant. versions were also Y2K compliant.
Libpng only has three year fields. One is a 2-byte unsigned integer that Libpng only has three year fields. One is a 2-byte unsigned integer that

View File

@ -1,6 +1,6 @@
.TH LIBPNGPF 3 "November 29, 2004" .TH LIBPNGPF 3 "December 3, 2004"
.SH NAME .SH NAME
libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8rc5 libpng \- Portable Network Graphics (PNG) Reference Library 1.2.8
(private functions) (private functions)
.SH SYNOPSIS .SH SYNOPSIS
\fB\fB#include <png.h>\fP\fP \fB\fB#include <png.h>\fP\fP

5107
ltmain.sh Normal file

File diff suppressed because it is too large Load Diff

336
missing Executable file
View File

@ -0,0 +1,336 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1Help2man' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0

111
mkinstalldirs Executable file
View File

@ -0,0 +1,111 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain
errstatus=0
dirmode=""
usage="\
Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
echo "$usage" 1>&2
exit 0
;;
-m) # -m PERM arg
shift
test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
dirmode=$1
shift
;;
--) # stop option processing
shift
break
;;
-*) # unknown option
echo "$usage" 1>&2
exit 1
;;
*) # first non-opt arg
break
;;
esac
done
for file
do
if test -d "$file"; then
shift
else
break
fi
done
case $# in
0) exit 0 ;;
esac
case $dirmode in
'')
if mkdir -p -- . 2>/dev/null; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
fi
;;
*)
if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
fi
;;
esac
for file
do
set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
shift
pathcomp=
for d
do
pathcomp="$pathcomp$d"
case $pathcomp in
-*) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp"
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
errstatus=$lasterr
else
if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
lasterr=""
chmod "$dirmode" "$pathcomp" || lasterr=$?
if test ! -z "$lasterr"; then
errstatus=$lasterr
fi
fi
fi
fi
pathcomp="$pathcomp/"
done
done
exit $errstatus
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# End:
# mkinstalldirs ends here

2
png.5
View File

@ -1,4 +1,4 @@
.TH PNG 5 "November 29, 2004" .TH PNG 5 "December 3, 2004"
.SH NAME .SH NAME
png \- Portable Network Graphics (PNG) format png \- Portable Network Graphics (PNG) format
.SH DESCRIPTION .SH DESCRIPTION

6
png.c
View File

@ -1,7 +1,7 @@
/* png.c - location for general purpose libpng functions /* png.c - location for general purpose libpng functions
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@ -13,7 +13,7 @@
#include "png.h" #include "png.h"
/* Generate a compiler error if there is an old png.h in the search path. */ /* Generate a compiler error if there is an old png.h in the search path. */
typedef version_1_2_8rc5 Your_png_h_is_not_version_1_2_8rc5; typedef version_1_2_8 Your_png_h_is_not_version_1_2_8;
/* Version information for C files. This had better match the version /* Version information for C files. This had better match the version
* string defined in png.h. */ * string defined in png.h. */
@ -680,7 +680,7 @@ png_charp PNGAPI
png_get_copyright(png_structp png_ptr) png_get_copyright(png_structp png_ptr)
{ {
if (&png_ptr != NULL) /* silence compiler warning about unused png_ptr */ if (&png_ptr != NULL) /* silence compiler warning about unused png_ptr */
return ((png_charp) "\n libpng version 1.2.8rc5 - November 29, 2004\n\ return ((png_charp) "\n libpng version 1.2.8 - December 3, 2004\n\
Copyright (c) 1998-2004 Glenn Randers-Pehrson\n\ Copyright (c) 1998-2004 Glenn Randers-Pehrson\n\
Copyright (c) 1996-1997 Andreas Dilger\n\ Copyright (c) 1996-1997 Andreas Dilger\n\
Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.\n"); Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.\n");

22
png.h
View File

@ -1,6 +1,6 @@
/* png.h - header file for PNG reference library /* png.h - header file for PNG reference library
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.) * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
@ -8,7 +8,7 @@
* Authors and maintainers: * Authors and maintainers:
* libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
* libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger * libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
* libpng versions 0.97, January 1998, through 1.2.8rc5 - November 29, 2004: Glenn * libpng versions 0.97, January 1998, through 1.2.8 - December 3, 2004: Glenn
* See also "Contributing Authors", below. * See also "Contributing Authors", below.
* *
* Note about libpng version numbers: * Note about libpng version numbers:
@ -109,6 +109,8 @@
* 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5 * 1.2.8beta1-5 13 10208 12.so.0.1.2.8beta1-5
* 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5 * 1.0.18rc1-5 10 10018 12.so.0.1.0.18rc1-5
* 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5 * 1.2.8rc1-5 13 10208 12.so.0.1.2.8rc1-5
* 1.0.18 10 10018 12.so.0.1.0.18
* 1.2.8 13 10208 12.so.0.1.2.8
* *
* Henceforth the source version will match the shared-library major * Henceforth the source version will match the shared-library major
* and minor numbers; the shared-library major version number will be * and minor numbers; the shared-library major version number will be
@ -138,7 +140,7 @@
* If you modify libpng you may insert additional notices immediately following * If you modify libpng you may insert additional notices immediately following
* this sentence. * this sentence.
* *
* libpng versions 1.2.6, August 15, 2004, through 1.2.8rc5, November 29, 2004, are * libpng versions 1.2.6, August 15, 2004, through 1.2.8, December 3, 2004, are
* Copyright (c) 2004 Glenn Randers-Pehrson, and are * Copyright (c) 2004 Glenn Randers-Pehrson, and are
* distributed according to the same disclaimer and license as libpng-1.2.5 * distributed according to the same disclaimer and license as libpng-1.2.5
* with the following individual added to the list of Contributing Authors: * with the following individual added to the list of Contributing Authors:
@ -250,13 +252,13 @@
* Y2K compliance in libpng: * Y2K compliance in libpng:
* ========================= * =========================
* *
* November 29, 2004 * December 3, 2004
* *
* Since the PNG Development group is an ad-hoc body, we can't make * Since the PNG Development group is an ad-hoc body, we can't make
* an official declaration. * an official declaration.
* *
* This is your unofficial assurance that libpng from version 0.71 and * This is your unofficial assurance that libpng from version 0.71 and
* upward through 1.2.8rc5 are Y2K compliant. It is my belief that earlier * upward through 1.2.8 are Y2K compliant. It is my belief that earlier
* versions were also Y2K compliant. * versions were also Y2K compliant.
* *
* Libpng only has three year fields. One is a 2-byte unsigned integer * Libpng only has three year fields. One is a 2-byte unsigned integer
@ -312,9 +314,9 @@
*/ */
/* Version information for png.h - this should match the version in png.c */ /* Version information for png.h - this should match the version in png.c */
#define PNG_LIBPNG_VER_STRING "1.2.8rc5" #define PNG_LIBPNG_VER_STRING "1.2.8"
#define PNG_HEADER_VERSION_STRING \ #define PNG_HEADER_VERSION_STRING \
" libpng version 1.2.8rc5 - November 29, 2004 (header)\n" " libpng version 1.2.8 - December 3, 2004 (header)\n"
#define PNG_LIBPNG_VER_SONUM 0 #define PNG_LIBPNG_VER_SONUM 0
#define PNG_LIBPNG_VER_DLLNUM 13 #define PNG_LIBPNG_VER_DLLNUM 13
@ -326,7 +328,7 @@
/* This should match the numeric part of the final component of /* This should match the numeric part of the final component of
* PNG_LIBPNG_VER_STRING, omitting any leading zero: */ * PNG_LIBPNG_VER_STRING, omitting any leading zero: */
#define PNG_LIBPNG_VER_BUILD 5 #define PNG_LIBPNG_VER_BUILD 0
/* Release Status */ /* Release Status */
#define PNG_LIBPNG_BUILD_ALPHA 1 #define PNG_LIBPNG_BUILD_ALPHA 1
@ -343,7 +345,7 @@
#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with #define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
PNG_LIBPNG_BUILD_PRIVATE */ PNG_LIBPNG_BUILD_PRIVATE */
#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_RC #define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
/* Careful here. At one time, Guy wanted to use 082, but that would be octal. /* Careful here. At one time, Guy wanted to use 082, but that would be octal.
* We must not include leading zeros. * We must not include leading zeros.
@ -1354,7 +1356,7 @@ struct png_struct_def
/* This triggers a compiler error in png.c, if png.c and png.h /* This triggers a compiler error in png.c, if png.c and png.h
* do not agree upon the version number. * do not agree upon the version number.
*/ */
typedef png_structp version_1_2_8rc5; typedef png_structp version_1_2_8;
typedef png_struct FAR * FAR * png_structpp; typedef png_struct FAR * FAR * png_structpp;

View File

@ -1,7 +1,7 @@
/* pngconf.h - machine configurable file for libpng /* pngconf.h - machine configurable file for libpng
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngerror.c - stub functions for i/o and memory allocation /* pngerror.c - stub functions for i/o and memory allocation
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -6,7 +6,7 @@
* and http://www.intel.com/drg/pentiumII/appnotes/923/923.htm * and http://www.intel.com/drg/pentiumII/appnotes/923/923.htm
* for Intel's performance analysis of the MMX vs. non-MMX code. * for Intel's performance analysis of the MMX vs. non-MMX code.
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* Copyright (c) 1998, Intel Corporation * Copyright (c) 1998, Intel Corporation

View File

@ -1,7 +1,7 @@
/* pngget.c - retrieval of values from info struct /* pngget.c - retrieval of values from info struct
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngmem.c - stub functions for memory allocation /* pngmem.c - stub functions for memory allocation
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngpread.c - read a png file in push mode /* pngpread.c - read a png file in push mode
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngread.c - read a PNG file /* pngread.c - read a PNG file
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@ -806,7 +806,7 @@ png_read_row(png_structp png_ptr, png_bytep row, png_bytep dsp_row)
* not called png_set_interlace_handling(), the display_row buffer will * not called png_set_interlace_handling(), the display_row buffer will
* be ignored, so pass NULL to it. * be ignored, so pass NULL to it.
* *
* [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8rc5 * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8
*/ */
void PNGAPI void PNGAPI
@ -856,7 +856,7 @@ png_read_rows(png_structp png_ptr, png_bytepp row,
* only call this function once. If you desire to have an image for * only call this function once. If you desire to have an image for
* each pass of a interlaced image, use png_read_rows() instead. * each pass of a interlaced image, use png_read_rows() instead.
* *
* [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8rc5 * [*] png_handle_alpha() does not exist yet, as of libpng version 1.2.8
*/ */
void PNGAPI void PNGAPI
png_read_image(png_structp png_ptr, png_bytepp image) png_read_image(png_structp png_ptr, png_bytepp image)

View File

@ -1,7 +1,7 @@
/* pngrio.c - functions for data input /* pngrio.c - functions for data input
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngrtran.c - transforms the data in a row for PNG readers /* pngrtran.c - transforms the data in a row for PNG readers
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,6 +1,6 @@
/* pngrutil.c - utilities to read a PNG file /* pngrutil.c - utilities to read a PNG file
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngset.c - storage of image information into info struct /* pngset.c - storage of image information into info struct
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngtest.c - a simple test program to test libpng /* pngtest.c - a simple test program to test libpng
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
@ -1551,4 +1551,4 @@ main(int argc, char *argv[])
} }
/* Generate a compiler error if there is an old png.h in the search path. */ /* Generate a compiler error if there is an old png.h in the search path. */
typedef version_1_2_8rc5 your_png_h_is_not_version_1_2_8rc5; typedef version_1_2_8 your_png_h_is_not_version_1_2_8;

View File

@ -1,7 +1,7 @@
/* pngtrans.c - transforms the data in a row (used by both readers and writers) /* pngtrans.c - transforms the data in a row (used by both readers and writers)
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -2,7 +2,7 @@
* *
* For Intel x86 CPU and Microsoft Visual C++ compiler * For Intel x86 CPU and Microsoft Visual C++ compiler
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* Copyright (c) 1998, Intel Corporation * Copyright (c) 1998, Intel Corporation

View File

@ -1,7 +1,7 @@
/* pngwio.c - functions for data output /* pngwio.c - functions for data output
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngwrite.c - general routines to write a PNG file /* pngwrite.c - general routines to write a PNG file
* *
* libpng 1.2.8rc5 - November 29, 2004 * libpng 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngwtran.c - transforms the data in a row for PNG writers /* pngwtran.c - transforms the data in a row for PNG writers
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -1,7 +1,7 @@
/* pngwutil.c - utilities to write a PNG file /* pngwutil.c - utilities to write a PNG file
* *
* libpng version 1.2.8rc5 - November 29, 2004 * libpng version 1.2.8 - December 3, 2004
* For conditions of distribution and use, see copyright notice in png.h * For conditions of distribution and use, see copyright notice in png.h
* Copyright (c) 1998-2004 Glenn Randers-Pehrson * Copyright (c) 1998-2004 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger) * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

View File

@ -6,7 +6,9 @@ For conditions of distribution and use, see copyright notice in png.h
Assumptions: Assumptions:
* The libpng source files are in ..\.. * The libpng source files are in ..\..
* The zlib source files are in ..\..\..\zlib * The zlib source files are in ..\..\..\zlib
* The zlib project files are in ..\..\..\zlib\projects\visualc7 * The zlib project file is in . /* Warning: This is until the zlib project
files get intergrated into the next zlib release. The final zlib project
directory will then be ..\..\..\zlib\projects\visualc71. */
To use: To use:

View File

@ -0,0 +1,44 @@
/* WARNING: This file was put in the LibPNG distribution for convenience only.
It is expected to be part of the next zlib release under
"projects\visualc71\README.txt." */
Microsoft Developer Studio Project File, Format Version 7.10 for zlib.
Copyright (C) 2004 Simon-Pierre Cadieux.
Copyright (C) 2004 Cosmin Truta.
For conditions of distribution and use, see copyright notice in zlib.h.
To use:
1) On the main menu, select "File | Open Solution".
Open "zlib.sln".
2) Display the Solution Explorer view (Ctrl+Alt+L)
3) Set one of the project as the StartUp project. If you just want to build the
binaries set "zlib" as the startup project (Select "zlib" tree view item +
Project | Set as StartUp project). If you want to build and test the
binaries set it to "example" (Select "example" tree view item + Project |
Set as StartUp project), If you want to build the minigzip utility set it to
"minigzip" (Select "minigzip" tree view item + Project | Set as StartUp
project
4) Select "Build | Configuration Manager...".
Choose the configuration you wish to build.
5) Select "Build | Clean Solution".
6) Select "Build | Build Solution (Ctrl-Shift-B)"
This project builds the zlib binaries as follows:
* Win32_DLL_Release\zlib1.dll DLL build
* Win32_DLL_Debug\zlib1d.dll DLL build (debug version)
* Win32_DLL_ASM_Release\zlib1.dll DLL build using ASM code
* Win32_DLL_ASM_Debug\zlib1d.dll DLL build using ASM code (debug version)
* Win32_LIB_Release\zlib.lib static build
* Win32_LIB_Debug\zlibd.lib static build (debug version)
* Win32_LIB_ASM_Release\zlib.lib static build using ASM code
* Win32_LIB_ASM_Debug\zlibd.lib static build using ASM code (debug version)

View File

@ -9,7 +9,7 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "pngtest", "pngtest.vcproj",
{0008960E-E0DD-41A6-8265-00B31DDB4C21} = {0008960E-E0DD-41A6-8265-00B31DDB4C21} {0008960E-E0DD-41A6-8265-00B31DDB4C21} = {0008960E-E0DD-41A6-8265-00B31DDB4C21}
EndProjectSection EndProjectSection
EndProject EndProject
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "..\..\..\zlib\projects\visualc7\zlib.vcproj", "{2D4F8105-7D21-454C-9932-B47CAB71A5C0}" Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "zlib", "zlib.vcproj", "{2D4F8105-7D21-454C-9932-B47CAB71A5C0}"
ProjectSection(ProjectDependencies) = postProject ProjectSection(ProjectDependencies) = postProject
EndProjectSection EndProjectSection
EndProject EndProject

View File

@ -2,7 +2,8 @@
<VisualStudioProject <VisualStudioProject
ProjectType="Visual C++" ProjectType="Visual C++"
Version="7.10" Version="7.10"
Name="pngtest"> Name="pngtest"
RootNamespace="pngtest">
<Platforms> <Platforms>
<Platform <Platform
Name="Win32"/> Name="Win32"/>
@ -26,9 +27,9 @@
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -73,9 +74,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -121,9 +122,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -169,9 +170,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -218,9 +219,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\Win32_DLL_Release CommandLine="set path=$(OutDir)\..;$(OutDir)\..\..\Win32_DLL_Release\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -267,9 +268,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -315,9 +316,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -363,9 +364,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"
@ -411,9 +412,9 @@ $(OutDir)\pngtest.exe ..\..\pngtest.png"
<Tool <Tool
Name="VCCustomBuildTool" Name="VCCustomBuildTool"
Description="Testing..." Description="Testing..."
CommandLine="set path=$(OutDir)\..;..\..\..\zlib\projects\visualc7\$(OutDir)\.. CommandLine="set path=$(OutDir)\..;$(OutDir)\..\ZLib
$(OutDir)\pngtest.exe ..\..\pngtest.png" $(TargetPath) ..\..\pngtest.png $(IntDir)\pngout.png"
Outputs="pngout.png"/> Outputs="$(IntDir)\pngout.png"/>
<Tool <Tool
Name="VCLinkerTool" Name="VCLinkerTool"
OutputFile="$(OutDir)/pngtest.exe" OutputFile="$(OutDir)/pngtest.exe"

View File

@ -0,0 +1,670 @@
<?xml version="1.0" encoding="Windows-1252"?>
<VisualStudioProject
ProjectType="Visual C++"
Version="7.10"
Name="zlib">
<Platforms>
<Platform
Name="Win32"/>
</Platforms>
<Configurations>
<Configuration
Name="DLL Release|Win32"
OutputDirectory=".\Win32_DLL_Release\ZLib"
IntermediateDirectory=".\Win32_DLL_Release\ZLib"
ConfigurationType="2">
<Tool
Name="VCCLCompilerTool"
InlineFunctionExpansion="1"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;NDEBUG"
StringPooling="TRUE"
RuntimeLibrary="2"
EnableFunctionLevelLinking="TRUE"
WarningLevel="3"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLinkerTool"
OutputFile="$(OutDir)\zlib1.dll"
LinkIncremental="1"
ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="NDEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCWebDeploymentTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="DLL Debug|Win32"
OutputDirectory=".\Win32_DLL_Debug\ZLib"
IntermediateDirectory=".\Win32_DLL_Debug\ZLib"
ConfigurationType="2">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;_DEBUG"
BasicRuntimeChecks="3"
RuntimeLibrary="3"
WarningLevel="3"
DebugInformationFormat="4"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLinkerTool"
OutputFile="$(OutDir)\zlib1d.dll"
ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"
GenerateDebugInformation="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="_DEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCWebDeploymentTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="DLL ASM Release|Win32"
OutputDirectory=".\Win32_DLL_ASM_Release\ZLib"
IntermediateDirectory=".\Win32_DLL_ASM_Release\ZLib"
ConfigurationType="2">
<Tool
Name="VCCLCompilerTool"
InlineFunctionExpansion="1"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;NDEBUG;ASMV;ASMINF"
StringPooling="TRUE"
RuntimeLibrary="2"
EnableFunctionLevelLinking="TRUE"
WarningLevel="3"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLinkerTool"
OutputFile="$(OutDir)\zlib1.dll"
LinkIncremental="1"
ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="NDEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCWebDeploymentTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="DLL ASM Debug|Win32"
OutputDirectory=".\Win32_DLL_ASM_Debug\ZLib"
IntermediateDirectory=".\Win32_DLL_ASM_Debug\ZLib"
ConfigurationType="2">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;_DEBUG;ASMV;ASMINF"
BasicRuntimeChecks="3"
RuntimeLibrary="3"
WarningLevel="3"
DebugInformationFormat="4"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLinkerTool"
OutputFile="$(OutDir)\zlib1d.dll"
ModuleDefinitionFile="..\..\..\zlib\win32\zlib.def"
GenerateDebugInformation="TRUE"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"
PreprocessorDefinitions="_DEBUG"
Culture="1033"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCWebDeploymentTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="LIB Release|Win32"
OutputDirectory=".\Win32_LIB_Release\ZLib"
IntermediateDirectory=".\Win32_LIB_Release\ZLib"
ConfigurationType="4">
<Tool
Name="VCCLCompilerTool"
InlineFunctionExpansion="1"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;NDEBUG"
StringPooling="TRUE"
RuntimeLibrary="2"
EnableFunctionLevelLinking="TRUE"
WarningLevel="3"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile="$(OutDir)\zlib.lib"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="LIB Debug|Win32"
OutputDirectory=".\Win32_LIB_Debug\ZLib"
IntermediateDirectory=".\Win32_LIB_Debug\ZLib"
ConfigurationType="4">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;_DEBUG"
BasicRuntimeChecks="3"
RuntimeLibrary="3"
WarningLevel="3"
DebugInformationFormat="4"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile="$(OutDir)\zlibd.lib"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="LIB ASM Release|Win32"
OutputDirectory=".\Win32_LIB_ASM_Release\ZLib"
IntermediateDirectory=".\Win32_LIB_ASM_Release\ZLib"
ConfigurationType="4">
<Tool
Name="VCCLCompilerTool"
InlineFunctionExpansion="1"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;NDEBUG;ASMV;ASMINF"
StringPooling="TRUE"
RuntimeLibrary="2"
EnableFunctionLevelLinking="TRUE"
WarningLevel="3"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile="$(OutDir)\zlib.lib"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
<Configuration
Name="LIB ASM Debug|Win32"
OutputDirectory=".\Win32_LIB_ASM_Debug\ZLib"
IntermediateDirectory=".\Win32_LIB_ASM_Debug\ZLib"
ConfigurationType="4">
<Tool
Name="VCCLCompilerTool"
Optimization="0"
AdditionalIncludeDirectories="..\..\..\zlib"
PreprocessorDefinitions="WIN32;_DEBUG;ASMV;ASMINF"
BasicRuntimeChecks="3"
RuntimeLibrary="3"
WarningLevel="3"
DebugInformationFormat="4"
CompileAs="1"/>
<Tool
Name="VCCustomBuildTool"/>
<Tool
Name="VCLibrarianTool"
OutputFile="$(OutDir)\zlibd.lib"/>
<Tool
Name="VCMIDLTool"/>
<Tool
Name="VCPostBuildEventTool"/>
<Tool
Name="VCPreBuildEventTool"/>
<Tool
Name="VCPreLinkEventTool"/>
<Tool
Name="VCResourceCompilerTool"/>
<Tool
Name="VCWebServiceProxyGeneratorTool"/>
<Tool
Name="VCXMLDataGeneratorTool"/>
<Tool
Name="VCManagedWrapperGeneratorTool"/>
<Tool
Name="VCAuxiliaryManagedWrapperGeneratorTool"/>
</Configuration>
</Configurations>
<References>
</References>
<Files>
<Filter
Name="Source Files"
Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat">
<File
RelativePath="..\..\..\zlib\adler32.c">
</File>
<File
RelativePath="..\..\..\zlib\compress.c">
</File>
<File
RelativePath="..\..\..\zlib\crc32.c">
</File>
<File
RelativePath="..\..\..\zlib\deflate.c">
</File>
<File
RelativePath="..\..\..\zlib\gzio.c">
</File>
<File
RelativePath="..\..\..\zlib\infback.c">
</File>
<File
RelativePath="..\..\..\zlib\inffast.c">
</File>
<File
RelativePath="..\..\..\zlib\inflate.c">
</File>
<File
RelativePath="..\..\..\zlib\inftrees.c">
</File>
<File
RelativePath="..\..\..\zlib\trees.c">
</File>
<File
RelativePath="..\..\..\zlib\uncompr.c">
</File>
<File
RelativePath="..\..\..\zlib\win32\zlib.def">
<FileConfiguration
Name="LIB Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
</File>
<File
RelativePath="..\..\..\zlib\zutil.c">
</File>
</Filter>
<Filter
Name="Header Files"
Filter="h;hpp;hxx;hm;inl">
<File
RelativePath="..\..\..\zlib\crc32.h">
</File>
<File
RelativePath="..\..\..\zlib\deflate.h">
</File>
<File
RelativePath="..\..\..\zlib\inffast.h">
</File>
<File
RelativePath="..\..\..\zlib\inffixed.h">
</File>
<File
RelativePath="..\..\..\zlib\inflate.h">
</File>
<File
RelativePath="..\..\..\zlib\inftrees.h">
</File>
<File
RelativePath="..\..\..\zlib\trees.h">
</File>
<File
RelativePath="..\..\..\zlib\zconf.h">
</File>
<File
RelativePath="..\..\..\zlib\zlib.h">
</File>
<File
RelativePath="..\..\..\zlib\zutil.h">
</File>
</Filter>
<Filter
Name="Resource Files"
Filter="ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
<File
RelativePath="..\..\..\zlib\win32\zlib1.rc">
<FileConfiguration
Name="LIB Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCResourceCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCResourceCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCResourceCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCResourceCompilerTool"/>
</FileConfiguration>
</File>
</Filter>
<Filter
Name="Assembler Files (Unsupported)"
Filter="asm;obj;c;cpp;cxx;h;hpp;hxx">
<File
RelativePath="..\..\..\zlib\contrib\masmx86\gvmat32.asm">
<FileConfiguration
Name="DLL Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Release|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Debug|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Release|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Debug|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
</File>
<File
RelativePath="..\..\..\zlib\contrib\masmx86\gvmat32c.c">
<FileConfiguration
Name="DLL Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCLCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCLCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Release|Win32">
<Tool
Name="VCCLCompilerTool"
AdditionalIncludeDirectories="..\.."/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Debug|Win32">
<Tool
Name="VCCLCompilerTool"
AdditionalIncludeDirectories="..\.."/>
</FileConfiguration>
<FileConfiguration
Name="LIB Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCLCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCLCompilerTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Release|Win32">
<Tool
Name="VCCLCompilerTool"
AdditionalIncludeDirectories="..\.."/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Debug|Win32">
<Tool
Name="VCCLCompilerTool"
AdditionalIncludeDirectories="..\.."/>
</FileConfiguration>
</File>
<File
RelativePath="..\..\..\zlib\contrib\masmx86\inffas32.asm">
<FileConfiguration
Name="DLL Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Release|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="DLL ASM Debug|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Release|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB Debug|Win32"
ExcludedFromBuild="TRUE">
<Tool
Name="VCCustomBuildTool"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Release|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
<FileConfiguration
Name="LIB ASM Debug|Win32">
<Tool
Name="VCCustomBuildTool"
Description="Assembling..."
CommandLine="ml /nologo /c /Cx /coff /Zi /Fo&quot;$(IntDir)\$(InputName).obj&quot; &quot;$(InputPath)&quot;
"
Outputs="$(IntDir)\$(InputName).obj"/>
</FileConfiguration>
</File>
</Filter>
<File
RelativePath="README.txt">
</File>
</Files>
<Globals>
</Globals>
</VisualStudioProject>

View File

@ -8,7 +8,7 @@
# Modeled after libxml-config. # Modeled after libxml-config.
version=1.2.8rc5 version=1.2.8
prefix="" prefix=""
libdir="" libdir=""
libs="" libs=""

View File

@ -6,6 +6,6 @@ includedir=${exec_prefix}/include
Name: libpng12 Name: libpng12
Description: Loads and saves PNG files Description: Loads and saves PNG files
Version: 1.2.8rc5 Version: 1.2.8
Libs: -L${libdir} -lpng12 -lz -lm Libs: -L${libdir} -lpng12 -lz -lm
Cflags: -I${includedir}/libpng12 Cflags: -I${includedir}/libpng12

View File

@ -33,7 +33,7 @@ RANLIB=echo
LIBNAME=libpng12 LIBNAME=libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
INCPATH=$(prefix)/include INCPATH=$(prefix)/include

View File

@ -33,7 +33,7 @@ RANLIB=echo
LIBNAME=libpng12 LIBNAME=libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
INCPATH=$(prefix)/include INCPATH=$(prefix)/include

View File

@ -18,7 +18,7 @@ RM = rm -f
LIBNAME=libpng12 LIBNAME=libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
prefix=/usr/local prefix=/usr/local

View File

@ -12,7 +12,7 @@ ZLIBLIB=/usr/local/lib
ZLIBINC=/usr/local/include ZLIBINC=/usr/local/include
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
ALIGN= ALIGN=

View File

@ -79,7 +79,7 @@ CFLAGS= $(strip $(MINGW_CCFLAGS) $(addprefix -I,$(ZLIBINC)) \
LIBNAME = libpng12 LIBNAME = libpng12
PNGMAJ = 0 PNGMAJ = 0
CYGDLL = 12 CYGDLL = 12
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
SHAREDLIB=cygpng$(CYGDLL).dll SHAREDLIB=cygpng$(CYGDLL).dll

View File

@ -23,7 +23,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng12 -lz
RANLIB=ranlib RANLIB=ranlib
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -32,7 +32,7 @@ ZLIBLIB=../zlib
ZLIBINC=../zlib ZLIBINC=../zlib
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -5,7 +5,7 @@
LIBNAME = libpng12 LIBNAME = libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
CC=gcc CC=gcc

View File

@ -15,7 +15,7 @@
LIBNAME = libpng12 LIBNAME = libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
CC=gcc CC=gcc

View File

@ -27,7 +27,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm
RANLIB=ranlib RANLIB=ranlib
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -41,7 +41,7 @@ RANLIB=ranlib
#RANLIB=echo #RANLIB=echo
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -24,7 +24,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng -lz -lm
RANLIB=ranlib RANLIB=ranlib
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -5,7 +5,7 @@
LIBNAME = libpng12 LIBNAME = libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
CC=gcc CC=gcc

View File

@ -13,7 +13,7 @@ INCSDIR=${LOCALBASE}/include/libpng12
LIB= png12 LIB= png12
SHLIB_MAJOR= 0 SHLIB_MAJOR= 0
SHLIB_MINOR= 1.2.8rc5 SHLIB_MINOR= 1.2.8
SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c pngwtran.c pngmem.c pngerror.c pngpread.c

View File

@ -13,7 +13,7 @@ INCSDIR=${LOCALBASE}/include/libpng
LIB= png LIB= png
SHLIB_MAJOR= 3 SHLIB_MAJOR= 3
SHLIB_MINOR= 1.2.8rc5 SHLIB_MINOR= 1.2.8
SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \ SRCS= pnggccrd.c png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \ pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c pngwtran.c pngmem.c pngerror.c pngpread.c

View File

@ -7,7 +7,7 @@ LIBDIR= ${PREFIX}/lib
MANDIR= ${PREFIX}/man/cat MANDIR= ${PREFIX}/man/cat
SHLIB_MAJOR= 0 SHLIB_MAJOR= 0
SHLIB_MINOR= 1.2.8rc5 SHLIB_MINOR= 1.2.8
LIB= png LIB= png
SRCS= png.c pngerror.c pnggccrd.c pngget.c pngmem.c pngpread.c \ SRCS= png.c pngerror.c pnggccrd.c pngget.c pngmem.c pngpread.c \

View File

@ -24,7 +24,7 @@ LDFLAGS=-L. -L$(ZLIBLIB) -lpng12 -lz -lm
RANLIB=echo RANLIB=echo
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -18,7 +18,7 @@ ZLIBINC=../zlib
LIBNAME=libpng12 LIBNAME=libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
CC=gcc CC=gcc

View File

@ -5,7 +5,7 @@
LIBNAME=libpng12 LIBNAME=libpng12
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
# Where make install puts libpng.a, libpng12.so, and libpng12/png.h # Where make install puts libpng.a, libpng12.so, and libpng12/png.h

View File

@ -34,7 +34,7 @@ LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng12 -lz -lm
RANLIB=echo RANLIB=echo
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -30,7 +30,7 @@ LDFLAGS=-L. -R. -L$(ZLIBLIB) -R$(ZLIBLIB) -lpng12 -lz -lm
RANLIB=echo RANLIB=echo
PNGMAJ = 0 PNGMAJ = 0
PNGMIN = 1.2.8rc5 PNGMIN = 1.2.8
PNGVER = $(PNGMAJ).$(PNGMIN) PNGVER = $(PNGMAJ).$(PNGMIN)
LIBNAME = libpng12 LIBNAME = libpng12

View File

@ -2,7 +2,7 @@
; PNG.LIB module definition file for OS/2 ; PNG.LIB module definition file for OS/2
;---------------------------------------- ;----------------------------------------
; Version 1.2.8rc5 ; Version 1.2.8
LIBRARY PNG LIBRARY PNG
DESCRIPTION "PNG image compression library for OS/2" DESCRIPTION "PNG image compression library for OS/2"

View File

@ -3,10 +3,9 @@
;------------------------------------------ ;------------------------------------------
LIBRARY LIBRARY
DESCRIPTION "PNG image compression library for Windows"
EXPORTS EXPORTS
;Version 1.2.8rc5 ;Version 1.2.8
png_build_grayscale_palette @1 png_build_grayscale_palette @1
png_check_sig @2 png_check_sig @2
png_chunk_error @3 png_chunk_error @3

3
test-pngtest.sh Executable file
View File

@ -0,0 +1,3 @@
#!/bin/sh
./pngtest ${srcdir}/pngtest.png